Invisible Trailer camera not completing set up

[Arnold Terkel]

Hi, I have a 2021 2500 LTZ pulling a 27 foot Airstream.  Tying to setup the Invisible camera. I have the camera mounted on my trailer.I can get a rear camera view, but the Invisible camera will not move from initialtion, no progress bar shows. I have moved the camera to different places, adjusted the seven input numbers and have driven about 30 miles while towing to try to complete the set up. Any one have this issue? Any solutions out there? Thanks 

[unit]

Try deleting the trailer from the truck and then add it back making sure all of your measurements are entered and that they are as accurate as possible.  Disconnect the trailer pigtail and the camera from the truck before deleting the trailer.  Then add the trailer back and plug in the pigtail to ensure the trailer is recognized properly.  Plug the camera back into the truck last and enter your measurements.  The truck should not be running when connecting either unit (pigtail or camera) to the truck.  Starting over can sometimes resolve issues.  Good luck with it!

[MTU Alum]

Post pictures of what the trailer camera image is.  In addition, it won't calibrate above 30 mph.  You need to drive straight under 30 mph.  You can turn around or make turns if needed.

 

#iworkforGM