Jump to content

Brake Pad Issues

cotect20
 Share

Recommended Posts

cotect20 Enthusiast

cotect20

Posted
Posted

I recently had my 2019 Silverado 1500 RST into my local shop for a state safety inspection (located in VT and required to have a yearly inspection), and was shocked to find out that the truck wouldn't pass inspection.  The technician said that the brake pads were severely rusted / corroded and that I would need ~$800-worth of brake repairs in order to be able to pass inspection.  They also said that in their opinion, this should not have happened and should be covered by warranty, and that they have seen the same thing on other 2019+ Silverados.

 

The truck has just under 29K miles on it.  Its the 5.3l V8, and is my daily driver.  Do not off road with it (unless riding gravel back roads is considered off roading).  Pull a 2-place snow mobile trailer with it about 5-6 times a winter.  By most standards, I would say the truck lives an easy life.

 

I've just begun the battle with Chevy over whether or not this should be covered under warrantee, its scheduled to be into the dealership next week, but wanted to reach out to see if others have seen similar issues and have had luck with getting the brakes repaired under warranty?  TIA.

 

 

driver1965 Enthusiast

driver1965

Posted
Posted

I live in SoCal so do not have this issue. I would work with the dealer you purchased the truck from. If nothing works, I would get Akebono (so?), brakes. Replace/ fix the rotors as needed. Or, purchase the heavy duty brake set ( several available), though they are pricey. Cheers…

Gangly Senior Enthusiast

Gangly

Posted
Posted

I would first check the brakes for yourself and see if the visual evaluation of your brake system by a state inspection employee is accurate or not.

  • Like 1
Phantom 4D Enthusiast

Phantom 4D

Posted
Posted
2 hours ago, Gangly said:

I would first check the brakes for yourself and see if the visual evaluation of your brake system by a state inspection employee is accurate or not.

Agree on that. Though I don't understand rust on brake pads. Rust on the outer edges of the rotors I understand. On the pads, no. I noticed you live in Vermont. Would the rust be from road salt? I would like to know what the dealer says. 

cotect20 Enthusiast

cotect20

Posted
  • Author
Posted
16 hours ago, Phantom 4D said:

Agree on that. Though I don't understand rust on brake pads. Rust on the outer edges of the rotors I understand. On the pads, no. I noticed you live in Vermont. Would the rust be from road salt? I would like to know what the dealer says. 

 

Yes, agree also, thanks.  Plan to remove the wheels this weekend and have a look for myself.  I don't believe that it is the brake pads themselves that are rusted, rather its something with the brake caliper/pad that is causing concern, whatever it is my mechanic indicated that its not typical.   I will try and post a pic over the weekend if I get a chance.

 

Yes the outer edges of the rotors do take a beating due to the winter conditions here in VT and show rust.  However that is not the concern and why it wouldn't pass the safety inspection.  If that was the case very few vehicles pass VT safety inspection.  For example our other car has 32K miles and has similar rust on the outside edge of the rotor but passed inspection without a problem.

 

Will report back with what the dealership has to say.  Thanks for the responses.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Keith179
      Cold start Miss, oil in cylinder

      By Keith179 · Posted

      I’m out of ideas on this truck. 2020 Silverado 1500. 5.3 135,000 miles. Has a p0308 and p050d codes. Smokes From exhaust when cold. Compression test passed. New plugs, wires and coil on cyl 8. Same issue. New coil on 8, no change. Replaced injectors, no change. Bore scope showed oil pooled on the piston after sitting overnight. Pulled head and had machine shop check it out. No cracks. Stem seals looked good, replaced anyways. He also ground valve seats. Put it all back together and still have the same issue. Bore scope shows oil on the piston again. Leaning towards maybe a cracked ring but unsure. Cylinder looked good when the head was off, no scoring or scratches. Any ideas on what else I should look for?  Appreciate the help 
    • HeronLeal
      2021 Silverado 2.7L – N232395310 – Can someone with GM dealer access check my VIN?

      By HeronLeal · Posted

      Just want to make sure it is covered by Special Coverage N232395310 Evaporative Emission Purge Pump 2021 Silverado 1500 Custom 2.7L L3B ~100k miles I'm getting DTCs P146B and P146F. VIN 3GCPWBEK2MGxxxxxx   I spoke to a person that works at GM and he said it is not covered after checking my VIN.   Is there anyone here who currently works for a GM/Chevrolet dealership and has access to GM Global Warranty Management / Investigate Vehicle History who could explain how the VIN eligibility is determined?   thank you    
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all that information, I might purchase one and see if it will work for me, if not they may let me return it! Yes for sure the tires are definitely within limit for my truck empty, and when I do tow I'll definitely make sure to raise the rear psi for the amount of weight that's going to be on it.
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Yes exactly, more and more these days people/companies are afraid of liability issues so its easier just to say no rather than risk putting their neck on the line.    I will say with the Autel unit or when I used it last year on my truck, it wasn't like I could choose the 2025 model year or even the 2024 model year as that option was not there to manipulate the placard pressures but had to go back to 2023 or there abouts and then it showed up as an option, odd but that was how the software was then and I can't say one way or the other now as they throw out updates every so often. I still would talk to your tire dealer though to start with and they may do it for nothing but also they may have a comment on a better unit to purchase. All I know is that one of the large tire shops in my area happens to use these Autel units for their use and set them up to use the wifi and all of that jazz for constant updating because each tire tech has one handed to them by the shop but I just plugged it into my laptop to update it and yes if one is bought it has to be registered so you can get the link to do updates and then the unit has to be updated before its even used. I am not at all techy so it took me a bit but anyway just a heads up for anything you buy, most likely it will need to be connected to a computer to access the internet to have it updated to the latest software version before you can put it to use.   If your truck is near empty, those tire pressures you listed are a very safe upper range pressures to carry the weight, both the front and rear as I know they could be run lower yet with an empty truck. And if its a trailer and not some motorcycle your going to strap onto the front of your truck on a rack, you shouldn't have a need to inflate your front tires if your at 55 front already, its the rear ones that would need more air if you have much hitch weight. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...