Jump to content

Engine Coolant Sensor Part Number 5.3 liter

Cheverado
 Share

Recommended Posts

Cheverado Enthusiast

Cheverado

Posted
Posted

Anybody have the GM part number for this? all of the internet research that ive done yield about a dozen different AC Delco part numbers and few 8 digit GM part numbers. Am trying to avoid driving down to the stealership. Prior to the original sensor (the one with the white plastic connector) failing, my engine temp was typically around 200 degrees. I replaced it with an AC Delco 213-4514 (has black plastic connector) (per Amazon correct fitment) and my temp doesnt get over 180 degrees.  What temps are yall seeing please?

Cheverado Enthusiast

Cheverado

Posted
  • Author
Posted
17 hours ago, txab said:

According to Rockauto you need 2134333, which has a white connector

Thanks even a blind squirrel finds a nut from time to time

F208F85F-2E34-4DAF-8872-C0FAA878CA52.png

Cheverado Enthusiast

Cheverado

Posted
  • Author
Posted (edited)

That for sure fixed the problem. Running 200° Ish Again

Edited by Cheverado
Cheverado Enthusiast

Cheverado

Posted
  • Author
Posted

Well after going to the store yesterday I noticed the temp fluctuating. Turns out the problem was the thermostat. Comes up to temp and stays there now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,973
    Total Members
    8,960
    Most Online
    RichardRS
    Newest Member
    RichardRS
    Joined

  • Who's Online   2 Members, 0 Anonymous, 655 Guests (See full list)

  • Latest Articles

  • Posts

    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      Howdy folks,   Recently I pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain (part numbers coming soon - will have to disassemble), and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash for the heating element.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But I seemingly can’t turn it off AND still no backlights on any of the buttons.    Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!
    • TrueBlue
      Brake Pad Warning Message

      By TrueBlue · Posted

      I'm about 1800 miles into my last oil change, and yesterday a message appeared saying oil life was at 77%. Not sure why it popped up but I think all of these electronics could be susceptible to solar flares or somesuch. I change my oil right at 3K each time, and that was the first time in 10870 miles that message came up. Strange thing is that it showed on the screen at all since I don't drive with that sort of info displayed on the DIC.
    • SwitchBladeSierra
      Heated steering wheel

      By SwitchBladeSierra · Posted

      I’m praying that someone sees this and can help me out… pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain, and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But can’t turn it off AND still no backlights.   Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!  
    • Vu1can
      Brake Pad Warning Message

      By Vu1can · Posted

      Checked the pads today and there's plenty of meat on them. If the message keeps coming up, I'll just answer YES that the pads were replaced and wait for the squeal.
    • richard wysong
      p0449, p0446, p0451 Evap codes

      By richard wysong · Posted

      Welcome to the Forum! Always post the code definitions along with the codes. there are over 18000 possible codes, no one remembers them all and most will skip over your post rather than look them up

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...