Jump to content

Recommended Posts

Posted

Have a question concerning trim levels. Ive not bought a new vehicle since 2006, and I have decided on a 2500 gmc pro or silverado custom. For anyone that has one of these 2 trim levels have you regretted not stepping up to the LT or SLE. I look at things as the more electronics the more problems to arise. I love the look of the old school gauges on the dash as well. Looking forward to hearing your thoughts. 

Posted (edited)

I have a 1500 but the Custom trim. I bought it solely for the simplicity meaning less electronics. I also love the old school gauges. The only thing that I like about the LT better than my Custom is the front grill. Otherwise, absolutely no regrets choosing this trim. 

Edited by Coastie05
Posted

Sierra HD Pro:

 

- If you want a power driver's seat on the Pro, you can't get it.  You have to go to SLE.

 

- Factory remote start?  Can't get it on any of the Sierra Pro trim (1500 or HD).  You have to go SLE.  

 

- 7 inch radio has limitations for replacement if you wanted to upgrade the screen, etc. 

 

- Steering wheel radio controls?  Nope.  Can you add them?  Yes.  NOT CHEAP.  Requires a new instrument cluster, steering wheel and wiring harness mod kit.  

 

- Fog lights?  Nope.  And no factory path to install them. 

 

Sierra HD SLE:

 

- IMO, the larger radio screen is a much better interface.

 

- Fog lights?  You can get them.  Steering wheel controls?  Has them.  Remote start?  Yep.  Power driver seat?  Available.  

 

 

Silverado WT:

 

- Same as the Pro above however you CAN get factory remote start installed at the dealer for the WT Chevy.  

 

Silverado Custom:

 

- Comes with 20" wheels only.  Can you swap later?  Sure.  But.  Truck is calibrated for the stock 20s (34" tire) and no path to properly recalibrate.  

 

- Power seat?  Yes.

 

- Steering wheel controls?  Same as the Pro above.  No but can be done and not cheap.  

 

Silverado LT:

 

- Same as the SLE.  You can get or it comes with many features you can't do on the lower trims.  

 

 

I'd say its all going to come down to what you NEED and what you WANT to have that you'd benefit from.  For me, things like power seat is a must (I hate the WT/Pro seating position), so I'd have to go Custom, LT or SLE right out of the gate.  Steering wheel controls?  Should be standard in 2026 across the board IMO, so again, puts me to LT or SLE.  

  • Like 1
Posted

Are you going to take long trips in it?  If so, try out the seats in the various trims. For me the lower trim level seats were not comfortable. 

  • Like 1
Posted

I bought an SLE last year after driving both and a couple different 1500's. The difference in options and comfort between the pro and SLE is significant. If they had an Elevation trim equivalent for the 2500 I probably would have gotten that.

 

I think a 2500 gasser SLE or LT trim is the best truck you can get for the price right now.

 

The power seats allow you to adjust the angle of the seat as well as up/down/forward/back/recline and lumbar. The heated seats and steering wheel are nice in the winter here, as is remote start. Carpet with the all weather floor mats are way nicer than vinyl floors and easier to clean. The digital dash has grown on me a bit, GM doesn't exactly have a great track record with the prolonged function of analog gauges, the dash cluster was the weakest point on the 99-06.5 trucks which were probably the best trucks they ever made. I like the bigger infotainment screen. I will say that I like GM's wider screen vs other brands that have taller screens. 

  • Like 1
Posted

Seats matter a lot.  I would start there - good advise here.  I had a 2018 LT Colorado before my 2026 LT Silverado, and the seats are so much better in the new one it's not even a contest.  That was one thing I always hated about the Colorado and I owned two of them spanning 10 years - but I did it so I could park in the garage mainly.  Now I have a much larger property and a huge barn so I have plenty of parking options and a full size is more useful for maintaining the property and current hobbies as well.  I wasn't evenb thinking about the seats as part of the reason for the move to the Silverado, but after two back to back 700mile road trips I am sold on the LT seats w/ leather 100%.  The other LT features are also nice - one thing I really like is the power rear window on the back window by the bed.  And the lighting in the bed is also very nice to have - I doubt that comes on the lower models.  Power tailgate - also quite useful - it's a heavy slug!  What else - I could take or leave the screen - but heated seats and steering wheel and cruise control on the steering wheel is very useable - I would never want to live without that.  Even the colorados had that.

Posted

Have a Silverado Custom 2500. 
 

Try out the seats ahead of time but can always add a pad or two if necessary. 
 

Love my truck. Only feature I thought I’d miss is Auto 4WD, but after driving it a few years, realize that it’s not necessary. 

  • Like 1
Posted

Just wanted to add that the GMC HD models all have LED headlights and tail lights, including the Pro model. I think the LTZ Chevy is the model that adds LED headlights. Something to think about as I read posts here about updating to LED headlights. Big price difference between Chevy Custom and LTZ.

Posted (edited)
17 minutes ago, rjgvt said:

Just wanted to add that the GMC HD models all have LED headlights and tail lights, including the Pro model. I think the LTZ Chevy is the model that adds LED headlights. Something to think about as I read posts here about updating to LED headlights. Big price difference between Chevy Custom and LTZ.

 

 

LT with the Trail Boss package gets them as well.  

Edited by newdude
  • Like 1
Posted
28 minutes ago, newdude said:

 

 

LT with the Trail Boss package gets them as well.  

 

I didn't see that model on the list, had to go in to see that the Trail Boss was an option for the LT. $7600 upgrade.

  • 2 weeks later...
Posted

We have a 2024 Chevrolet Silverado 2500 HD Custom Trim Level 6.6 Gas

For us the truck has all the options we  need . My thinking is less options less problems .

I don't find the seats bad at all mind you the longest I have driven it is 4 hours 

LED lights would have been nice instead of the factory Halogen 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,303 Guests (See full list)

  • Latest Articles

  • Posts

    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...