Jump to content

Anyone have APC headlights with NO problems??

stebob

Recommended Posts

stebob Enthusiast

stebob

Posted
Posted

I bought a pair of APC Diamond clear headlights for my '97. I couldn't pass up the price, but I do hear of a lot of problems with these. Does anyone have any that they don't have problems with? I don't have them yet but before I install them I will run clear silicone to seal them up good. But, I've heard problems with fitment, bouncing and other problems. Anyone shed any light on this subject for me? Did I just waste my money?

min9861 Enthusiast

min9861

Posted
Posted

ive heard water geting into the apc tailights. but im not sure about the corners. i would of stayed away from apc, but thats just me.

Bgdsub72 Enthusiast

Bgdsub72

Posted
Posted
i have the tyc projectors not apc they seem ok so far . good luck

 

 

 

 

 

talking about the 88-98 apc projectors, I had them on my 95 Silverado and quickly removed them and sold them. They are more for looks... They do not give off very much light at all, and cut down the stock light output by at least half. The diamond lights double the output...

bartlanz Enthusiast

bartlanz

Posted
Posted

I have the APC Diamond headlights, I havnt had any problems yet, and I like the way they look and the cut off. So far so good, knock on wood!

intruder217 Enthusiast

intruder217

Posted
Posted

I have the APC Diamond clear on my 99 Suburban. No problems so far, been in about a month now. I used the factory mounts and just installed the headlight buckets to them. I used Silverstars in the High beam side. Nice light thrown a long way with decent focus. I ordered mine from mrtaillight.com. I used their relay kit to make all four lights stay on with hi beams.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • ryan35205
      Lets Talk Z60 Suspension

      By ryan35205 · Posted

      Did the KYBs keep it the same height in the front? I was concerned that pre-assembled assembly would raise it up an inch to standard non-z60 height.. I guess which it would make the rake 1 inch instead of 2 inches.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Thank you for keeping the train on the tracks and for a thoughtful engagement. I enjoyed the reflection on a previous stance to refine and improve your position. I like that inquisitive flexibility about you Atlas.    No the process isn't sterile. Hundreds, perhaps thousands of miles of piping, vessels, pumps. Chevron, the people I worked for, were keenly aware that there is a market for what is known as their "ISOCLEAN" line of lubricants. These are lubricants that are the same as those sold bulk that are further processed by filtration to a level your particular application demands. They will filter and package and provide lab documentation as required. Do not kid yourself. Every gallon of oil that goes into a Chevron Turbine, reciprocating compressor, generator is prefiltered and tested before being charged. Lest wise it was when I was there in the plants I worked in.    There are requirements set by manufactures for the cleanliness of the oils used in their equipment. OTR such as CUMMINS has standards shared with customers on this. Commercial interest selling to Ma and Pa do, but don't share that information. Not even upon request but internally, they do exist.    The GM study sited, (Graph from Machinery Lubrication in previous post) only shows "relative" importance.  I find that fascinating. By constructing the graph like this they admit there are dozens of factors in engine life and via scientific method determined the effect of 'relative cleanliness' on engine life not in miles but in 'FACTORS'. This allows a certain amount of reverse engineering does it not?   They even provided some touchstones. Beta 75 as a reference point. Wonderful stuff!!   Smaller blenders CAN and some DO take the time and effort to do better than a refinery or large bulk blender, like Warren Oil, in improving the "in the can" cleanliness. No I don't have a list but testing could generate that information.    Again, but one of several levers we can pull to improve engine life. The simplest is keeping a clean work station while doing your own oil changes.     
    • Mykel544
      New Guy from Oklahoma

      By Mykel544 · Posted

      Thank you. I'll give it a try 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I just spent the last 45K miles doing samples every oil change over more than a full year to get the data for seasons and break-in to broke in.    I found the same thing to be true. Something was always teetering on done or had stepped off the cliff long before the OLM was DOA. In fact, I found about a thousand mile difference between summer and winter. That is during the winter half the OLM was STILL too long. Even the severe schedule was to long in the winter.   Now having done the work I can say I was NOT DISAPOINTED. I saw nothing I didn't already know. Nothing my father hadn't already demonstrated in his 2K OCI's pushing dated iron on dated oils and weak filters to mileages well beyond 300K.   Building on his work through use of Lab testing it wasn't hard to find the correlation between 'sight/feel/odor, the things dad relied on, and test results. Use of current viscosity stable chemistries & filters has pushed that marker for my motors out to 3K summer, 4K winter.    So the early lies were 3K on conventional oil and the lie upon the lie was 7K+. turns out to be off by a factor of two.    So... it is true that modern chemistry has doubled the useful oil life. But the base milage that came from was off by double. It's how good lies work. Partly true, sometimes mostly true so that your meter isn't set off. It also means that non-shear-stable shelf oils are only now as good as the old oils were in their best case scenario.    So the question now is how do we improve on that? Thus the question into cleanliness among the other items listed in the post quoted below.    If this bores you, feel free not to participate.       
    • newdude
      2027 Chevrolet Silverado: Official Discussion

      By newdude · Posted

      Is it though?  Like LTZ, not a high take rate.  Current Sierra has AT4, Denali and Elevation as its main bread winners.  Each trim accounting for 25-35% of sales for Sierra.  SLT makes up about 10-15% at best.        Like others have predicted here for GMC, it will be:   - Pro (equal to WT Chevy)   - Elevation (replaces SLE and SLT)   - AT4 (and X)   - Denali (and Ultimate).  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...