Jump to content

Fog Light Shape


Recommended Posts

Posted

Might do a front bumper upgrade soon, and found myself thinking about putting in better fog lights.

 

It seems to me – intuitively – that rectangular shaped fog lights would do a better job than round. Everything else being equal, a rectangular shaped beam seems likely to get more intense light to those critical outside corners while still adequately covering the rest of the necessary field. Even though they have ‘tuned’ interior directional molding ridges, round light seem like they would inevitably “waste” light out the tops and bottoms, which isn’t a part of the vision field fog lights need to cover.

 

Gotta admit, however, that round looks better. But my final decision will go for practical over style every time.

 

What do you think?

 

gnutruk

Posted

i've always been partial to the recangle ones myself. I wish I had a set in my truck. The "custom" lower front bumper on my truck doesnt have spaces for it so I'd have to get another front bumper and fog lights. But I digress, I do think the rectangle lights work better. got a round set of factory hellas in the 4runner but they have almost no side to side light, only the first 4 feet in front of the vehicle do they really work. my 2 cents

Posted

I have to agree with you. Rectangular lights put out the proper beam for a true 'fog' lamp.

 

I have factory fog lamps on 4 of out vehicles.... every one of them is rectangular.

 

DEWFPO

Posted

With the factory fog setup, the rectangular ones on the '02 'rado kicks the Z71 Tahoe's factory round ones in brightness and pattern, but that is not saying very much for either. The newer design rectangular ones in the '03 up 'rados seem to be much better than both of ours. :thumbs:

Posted
With the factory fog setup, the rectangular ones on the '02 'rado kicks the Z71 Tahoe's factory round ones in brightness and pattern, but that is not saying very much for either.  The newer design rectangular ones in the '03 up 'rados seem to be much better than both of ours. :thumbs:

 

 

 

yea those new ones are a lot larger than the 99-03 sierra rectangle lights. they also make the truck look a lot more aggressive too

Posted

I like the rectangular fogs on my 99...yea, they could be brighter, but they do the job and I like the styling of them. The rectangular shape flows nicely with the lines of the truck.

Posted

The fogs on our '04s are the best part about the front ends on 'em! I thought I liked them, but my father recently gave them an enthusiastic endorsement. If you knew him you'd understand that for him, that's the same as gushing. :thumbs:

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined
  • Who's Online   0 Members, 0 Anonymous, 288 Guests (See full list)

    • There are no registered users currently online
  • Latest Articles

  • Posts

    • This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • 2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...