GM\Bose Connector pins

05blackz71 · October 10, 2005

I was wondering if anyboy has the part numbers or where to purchase the connector pins that go into C1 and C2 connectors on the back of the HU...Thanks in advance

GDN · October 17, 2005

I found this in other posts - part number 12089649- GM Terminal ends. Most dealers in Dallas didn't stock them, but one did. When I bought them they looked weird - they are made from a stamp into a small sheet of tin or whatever they are made of. But once you cut them apart or see one that is already in the connector you'll see they are the same thing.

05blackz71 · October 17, 2005

I found this in other posts - part number 12089649- GM Terminal ends. Most dealers in Dallas didn't stock them, but one did. When I bought them they looked weird - they are made from a stamp into a small sheet of tin or whatever they are made of. But once you cut them apart or see one that is already in the connector you'll see they are the same thing.

<{POST_SNAPBACK}>

Thanks GDN!!!!!!!

bigdogs · October 25, 2005

I found this in other posts - part number 12089649- GM Terminal ends. Most dealers in Dallas didn't stock them, but one did. When I bought them they looked weird - they are made from a stamp into a small sheet of tin or whatever they are made of. But once you cut them apart or see one that is already in the connector you'll see they are the same thing.

<{POST_SNAPBACK}>

They are made by Delph Packard aka Power and Signal group. We sell them but in larger quantites. They appear to be stamped on a piece of tin as they probably came off a tape and reel package which is usually used for automated crimpers.