Tpms Sensor Question..removing/installing?

[giant96]

I have the OEM Alloy 17" wheels w/ tpms sensors on my 2007 NBS . Are these easy to remove and reinstall on a set of OEM Steel/Chrome clad 17" wheels froma 2007 NBS? Do these just screw off and on? Will I have to reprogram and how is this done? Thanks

[mkayler]

Giant96

 

Check this post out there is PDF in there that shows on how they are installed. And good threed on the programming too.

 

 

http://www.gm-trucks.com/forums/index.php?...336&hl=tpms

 

 

Good Luck

Mike

[silverado34]

I just did this only the other way around. I put alloy wheels on and took off the steel chrome clad wheels. By the way I have the steel wheels with the chrome for sale, on ebay if you are interested. I went to my delaer and got new valve stems. They were about $7 a peice, but all you have to do is unscrew the sensors from the bottom of the valve stem and screw it onto the bottom of the the new valve stem. Then when you reinstall on your truck, just hit the relearn botton and you should be all set. I also have an extra set of valve stems and sensors if you need them.