Jump to content

How Long Do Factory Orders Take?

timmerk

Recommended Posts

timmerk Enthusiast

timmerk

Posted
Posted

I was just wondering how long the average time is to build and get a factory built GMC Sierra 1500? Also, are factory orders on hold because of the American Axle strike?

 

Thanks

Live2FlyLow Enthusiast

Live2FlyLow

Posted
Posted

My local dealer said they have been getting GMC Sierra 1500's within four weeks of order in the St Louis area. He continued by saying they have not recieved any information as to any delays due to the axle strike / plant shutdown. But I don't see how they couldn't have some lengthly delays due to this situation.

MS3DALE Senior Enthusiast

MS3DALE

Posted
Posted

Ordered my '07 on Jan.11th,It was built Mar.5th and delivered Mar.13th.

However I've waited as long as six months for a special order truck to come in (My '91 & '97)

And yes,With the strike all orders will be delayed for sure.

redvett Senior Enthusiast

redvett

Posted
Posted

All GMT900's and all other truck platforms are shutdown. Don't expect a settlement soon. It may be summer before there is a settlement. Might be a good time to buy a car with gas prices already at $3.45 average. Cant wait for my CTS Cadillac to get here on 3/30/08. :-)

snarkee Senior Enthusiast

snarkee

Posted
Posted

i put in an order for an 08 sierra rcsb z71 on March 5th....On march 11th my order was checked and i was given a build week of March 24th....so now i am confused-are they building on a limited production schedule or not?

RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted

I went to the dealer and ordered my Tahoe on Feb 11th. The order actually went in 2 or 3 days later. The Tahoe arrived at the dealer on Feb 27th. It was about 2 wks to the day from time of order until delivery it all depends what they are making I guess.

 

My 2000 Silverado took just under 4 wks from order to delivery

MS3DALE Senior Enthusiast

MS3DALE

Posted
Posted

snarkee,if your lucky you might have your truck by the time the race comes around in October! :crackup:

snarkee Senior Enthusiast

snarkee

Posted
Posted

i hear ya rich....i am just going by what the rep said yesterday.....I will wait till the months end and if what i think happens does happen, then i will try to get one from another dealer close by

MS3DALE Senior Enthusiast

MS3DALE

Posted
Posted
are they building on a limited production schedule or not?

As far as us dealers know,The plants are totally shut down...They can't build any trucks without the axles.

Now we did get an Escalade in today,but it was built a week-and-a-half ago at the Arlington,TX plant,and the carrier driver told me it was shut down now because of the strike.

MS3DALE Senior Enthusiast

MS3DALE

Posted
Posted

One other thing Mark,The truck you have ordered,being a 1/2-ton regular-cab,will be built at either the Ft.Wayne,In. plant or the Pontiac,Mi. plant.

snarkee Senior Enthusiast

snarkee

Posted
Posted
One other thing Mark,The truck you have ordered,being a 1/2-ton regular-cab,will be built at either the Ft.Wayne,In. plant or the Mexico plant.

 

LOL i just asked you via PM if Mexico made trucks or not....arent they still open ?

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,847
    Total Members
    8,960
    Most Online
    FiLo
    Newest Member
    FiLo
    Joined

  • Who's Online   6 Members, 0 Anonymous, 642 Guests (See full list)

  • Latest Articles

  • Posts

    • wassupdoc
      Wiper Blade Replacements

      By wassupdoc · Posted

      sorry to bump an old thread, im a bit clueless with this stuff, would these fit a 2019+ Silverado? https://wiperpro.com.au/products/chevrolet-silverado-wiper-blades mainly wondering if the beam shape stays planted at highway speed, thats what seems to let the factory ones down imo
    • mysery1
      What have you done to your K2 today?

      By mysery1 · Posted

      I have a 2018 Silverado Custom with 156k on the odometer. In the last month I've replaced the plugs, wires and the driver side engine mount. My wife just returned from a trip of about 1500 miles and told me the brakes are making a grinding noise when applied. I drove it and looked it over and this is what I found with the driver's side rear rotor.   I'm going to order new pads and check about having the rotor resurfaced. Hopefully this is easier than the last 2 jobs.   Peace  
    • FiLo
      5.3 / 6.2 valve covers / oil burning

      By FiLo · Posted

      Any update if the new valve cover help with the oil consumption?  I have a 2014 GMC sierra and my truck is consuming a lot of oil so I’m wondering if replacing the driver side valve cover will stop some of the oil consumption. Thanks 
    • Deadwood
      primary drive belt tensioner

      By Deadwood · Posted

      I bought belts and pulleys for my '20 L5P at Rock Auto a couple years ago. I have used them for many years, and almost always save significant money, especially when I buy maintenance stuff ahead of time.   They carry many OEM parts, which is all I use unless an aftermarket is shown to be same/superior, or if it is an insignificant part or unavailable OEM part anywhere else. RA is usually lower priced, often by a bunch, but parts are sometimes unavailable or out of stock, and I do shop around and sometimes find better prices at other sites.   Be aware that you pay shipping, and if you buy multiple items and they are coming from different warehouses, the shipping can kill the advantage. Planning ahead is best if possible.   If you have a transmission service in the near future, check out their OEM (AC Delco ULV) fluid, usually MUCH less than anywhere else.
    • Deadwood
      10L1000 anyone with High Mileage ? I hate Damocles....

      By Deadwood · Posted

      New member here, very long time occasional guest. Saw this thread, thought it would be a good time to contribute someting. It is only my experience and not a claim that everyone will have the same.   I bought my '20 3500 L5P new and have put 99.9% (literally) of it's current ~400k miles on it myself, with over 50% of that towing loads between 4k to 15k, and to me this truck has been nothing short of amazing. For the first 235k I had zero issues, and from there until 321k I replaced a NOx sensor, two failing glow plugs, and three of the notorious injector connectors. I believe this truck is in part, a testament to good luck, but also good care and following a decent maintenance schedule (I also keep meticulous records.) As a result, it looks as good as a well cared for 70k rig, up and down, inside and out.   At some point before that 321k mile mark I began to get a little spooked about the 10L1000, especially the valve body. Word of mouth about potential issues prompted me to jump on the net to sift through all the noise and determine what all the fuss was about. I routinely take long trips, coast-to-coast and points in between, so roadside breakdowns can be '...a thousand miles from nowhere' and a bit of a challenge, and though I had no issues, my guard was up and activated.   And then I stumbled across a chance to salvage some parts off a new 2025 that had been wrecked in transport. I grabbed a few wear items (alternator, pulleys, etc.) and on a whim asked what the ten speeder would cost me. It was cheap...really cheap. I knew some changes had been made in the '24+ version 10L and were supposedly not compatible, but I called service/parts at my local Chevy dealer and asked why and they didn't know. A call to a well known aftermarket transmission outfit revealed it was very likely it would be fine, but to them not 100% sure.   Because it was cheap (really cheap) and I was spooked, I took the chance. Had it installed by a local shop and it worked like a champ, shifted just like the original. At it's first service at 37k, I had the shop put in a Next Gen valve body kit, which after some initial hiccups and rough shifts, smoothed out though with somewhat firmer shifting.   All that said, I have a very serious concern about my newer transmission as just two weeks ago it suddenly began to exhibit a strong reluctance to engage forward or reverse. It was a bit past due anyway so I took it in for service. The reason it was sticking was due to 'glitter' in the fluid clogging the filter...not good folks, often indicates a converter giving out. We ended up going ahead with the new filter and fluid, first to see if it would move and shift, and then if so buy me a little time. It did, and I've driven it over a thousand miles and it is shifting smooth, no noises or slipping. Regardless, it looks like a third gearbox is in my future so I can resume taking long trips with some confidence. In the very short term, my curiosity will have me examining the fluid to check how much glitter has reappeared.   An earlier poster had alleged, in the context of 10L100 failures, that it is another example of how we seasoned citizens somehow descend into hysteria, lose control of our senses, and react irrationally after brief encounters with the idiocy of the internet infosphere. Let me say (and I have used and abused said internet since it's infancy) there is no segment of the populace that has a corner on over-reaction to digital garbage. Just as my offering of experience in this arena is purely anecdotal and should not be considered gospel or all-encompassing, I believe it is still worthwhile information to consider, along with other relevant anecdotal experiences about things like complex transmissions, especially when balanced with other sources.   So to answer the original question, yes I got high miles out of my first 10L, trouble free for 321,000. Now I really wonder how much longer it would have went. Did I 'overreact' to the internet ghouls by replacing a 'good' one with a 'bad' one? Maybe. Who knows, the thing might have taken a puke a 100 miles later. So I'll just fix it again, then move on and start thinking about all the other stuff that will eventually wear out. It still has the original brakes (they're at ~60%), original injectors/pump, turbo, water pump, etc....pretty much original everything. Knock on wood.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...