2" Rough Country Composite Spacer Install

[sams819]

Well I installed my rough country 2" composite spacer today. It took a total of 1 hr and 36 minutes for the complete install. Jack up vehicle, place jack stands, remove tires, loosen the 3 upper strut bolts, remove the bottom 2 strut bolts and nut retainers, remove the 10 mm bolt that holds the brake line and abs wire. remove the sway bar rubbers and spacers. place a jack under the front lower a frame about 1 inch low, remove upper ball joint nut and hit with a ball peen hammer. It come off pretty easy. Install the spacer and bolts. tighten and put truck back together in reverse order. Very simple. After install get a front end alignment, and head light adtustment. The kit raised mine exactally 2 inches, and it sit level. Very satisfied.

[Zak_LScrew]

Nice, Need pics!!! I have the same thing and I just installed a rear BDS add a leaf set. Easy to do but a good workout.

[Erichcb]

 

pics