Jump to content

Nfl Is Back!


tanked_darren

Recommended Posts

Posted

Is anyone else excited to have NFL back in season? Where will Favre end up this year? I've heard the colts were gunnin' for him :thumbs:

Posted

Colts might wish they called him though. They just got Kerry Collins out of retirement. Peytons neck must be bad.

 

GO COWBOYS!!!!

Posted
anyone catch the Pats/Lions game last night? Brady didnt look too sharp, and the Lions are playing alot better than last year.

They can't suck forever!

Posted
anyone catch the Pats/Lions game last night? Brady didnt look too sharp, and the Lions are playing alot better than last year.

They can't suck forever!

 

 

They are trying hard though, I don't think they have made the playoffs in I dunno when, long time, I guess as a lions fan with a 0 - 16 season still in your recent memory anything will look good though.

  • 3 weeks later...
Posted

if they don't protect Romo better their seasons gonna go down the crapper again.

Posted

Crap. Just heard Romo has a punctured lung as well as a fractured rib. Might b a long season

Posted

I have been on a 3 year boycott of my team! The Eagles...I am back this season since the team added alot of new blood and has been hyped up alot.

Unfortunately the reason for my boycott is Andy Reid, the worst coach in the NFL.

I watched today as the Giants killed The eagles, and busted the Q-backs, hand.

To add insult to injury, Andy Reid acted like a complete JERK in the postgame interview..

I know exactly what will happen to the eagles...they are doing the same exact pattern as the last 10 years...They are picked as top favorites in their conference, then start off with a losing record..say 2 and 5. Then after the Bye week The Eagles will win 8 or 9 straight games, get into the playoffs, and completely CHOKE against an inferior team.

I will be resuming my boycott against all things Phila. Eagles!!

I will continue boycotting until the idiots Andy Reid and the president Joe Banner are fired..and BANNED for all time from the NFL.

Nobody should have to endure 13 years of such total frustration

FIRE ANDY REID NOW!!!!!!!!!!!!!!!!!!!!

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,791
    Total Members
    8,960
    Most Online
    d.lowrey
    Newest Member
    d.lowrey
    Joined
  • Who's Online   2 Members, 0 Anonymous, 2,694 Guests (See full list)

  • Latest Articles

  • Posts

    • Just did an injector/HPFP replacement on Pepper at 192,400 miles; close enough to 200K, RIGHT? (If 200K is considered life end and to me it isn't). But hey, to each his own.    Have never run a catch can on this vehicle. Back side of every valve looked like a new valve spray painted semigloss black. Port walls looked 'neat' (all a normal result of passive EGR via VVT) Zero build up even in AFM cylinders. Just color. It uses no measurable oil and never has.    At 155,000 I put her on E-85 and a borescope of the cylinders at plug change showed very clean pistons and valve faces. The replaced injector tips looked new. (It was the pump piston seal that was leaking). Oh well, have six good backups.    Still gets 28 mpg on gas (highway average) and over 20 (highway) on alky. UOA's look good and runs as good now as it did when I bought it. Better in fact.    What improvement would a Catch Can provide this motor?     And given all this I expect that IF I installed one I'd see some water/gas/oil vapor accumulation. Byproducts of normal combustion.   Having said that, IF my motor used an appreciable amount of oil I'd consider it a useful 'crutch' until I had the situation corrected OR if bore polished, until I junked it or rebuilt it to stave off repeated plug fouling.    I'm not telling you what I THINK. But what its DONE.          
    • Love the look. I'm a SCSB lover myself.    Two items. 1.) A spacer changes scrub radius but this also changes when we use wheels of different offsets. A little isn't a big deal. 2.) Steel wheels, alloy wheels all have different thickness. Same effect on the stud and lug nut as a spacer. When hub centric the wheel isn't supported by the stud. It's supported by the hub. The stud just keeps it all together.  
    • I had a evap sol go bad a couple weeks ago. . I replaced it.  While watching live data at the time I saw I had some cylinder 1 misfires. No MIL but on live data I could see ~50 at startup and about 70 more after an hour a drive all on cyl 1.  I also noticed that the LTFT were -5% to -15% always.  And that bank 2 is always -3% richer than bank 1. Even across all driving modes, city, highway, etc it’s always 3% richer than bank 1. So I start with the misfire. Swapped coil, plug, and plug wires from 1 to 3. No follow. I got an Injector reseal kit, pulled the D/s injector rail, swapped #1 and #3 injectors, resealed them, reinstalled and retested.  The misfire followed to 3. So I ordered and replaced all 8 injectors, spark plugs, and plug wires. Also replaced the 1 time use fuel pipes under the intake manifold.  Injectors that were in the truck since new were  Part # 12668390.  I replaced them with # 12742701 Got from RockAuto. Pretty certain they’re genuine and the correct ones. I called a friend at a parts store who told me “the 12742701 were the correct superseded part # for the originals I was replacing”. So started truck after replacing all that and it’s running -15 - -30 LTFTs. I reset the fuel trims with GDS2 and drove it for a 60 miles trip each way. There have been no changes in the LTFTs.  I checked if the HPFP was leaking into the crankcase. I removed the pvc and watched the trims. No difference.  I checked the alcohol content and it was at 10%  I’m out of ideas here. Truck seems to run great. Just always rich on the fuel trims.  Anyone with any help or ideas would be greatly appreciated.  I ran an injector balance test just for the heck of it and it came back this. I’m confused.  I have gds2 and some other diag tools if anyone knows of anything I should test next.
    • Definitely needs to go back to the dealer. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...