3 inch body lift.

[stuey101]

hey everyone, i bought a 2011 1500 chevy crew cab 4x4 a while back and just put new rims on, pro comp 7036 series 17 inch rims, they are 17x9 inch rims with 4 3/4 inch back spacing, i have stock rubber on them 265/70 and the rub while turning, i dont want to go with a big suspension lift as i do mostly highway driving and the odd field when i help on the family farm. ive looked around at BL and they all seam to say that they wont work with a manual transfer case. so before i go and decide how to raise my truck or if i should go out and buy different rims again due to me not paying enough attention to backspacing. any help would be appreciated greatly. id rather not do a suspension lift if i dont need to.

[dave_benn]

Im not sure how much your rubbing but you could probably get away with a $65 rough country level kit that would be easier to install then the body lift.

[Mckenzie]

just crank the stock torsion bars a little and see if that will help

[blackout07]

just crank the stock torsion bars a little and see if that will help

 

 

He doesn't have t-bars. Op, just get a 2 - 2.5" leveling kit. Like mentioned above, it's cheaper and much easier to install.