Jump to content

An American Legend Lost...

GasHog369

By GasHog369
in The Off-Topic Bar

Recommended Posts

GasHog369 Senior Enthusiast

GasHog369

Posted
Posted

http://crimeblog.dal...th-county.html/

 

RIP Chris.. Thankyou for your service.

 

Chris Kyle, a former Navy SEAL and author of the best-selling book American Sniper, and a second person were shot and killed Saturday at a gun range in Erath County, U.S. Marshals said.

Late Saturday, Lancaster police arrested a man who they say matched the description of a man wanted in connection with the slayings. After a brief chase, officers arrested 25-year-old Eddie Ray Routh, according to Lancaster police spokesperson Kelly Hooten.

Reporting on the shootings, the Stephenville Empire-Tribune said Erath County Sheriff Tommy Bryant would not discuss the victims. But the newspaper said that a source working at Rough Creek Lodge, which has a gun range at which the newspaper reported the slayings occurred, confirmed that one of the victims was Kyle.

WFAA-TV (Channel 8) reported that Kyle was shot point-blank while helping another soldier who is recovering from post traumatic stress syndrome.

Erath County officials had issued an alert for authorities to be on the lookout for the gunman, who was believed to be armed and dangerous and driving a black Ford F-350 truck with large tires and rims.

The suspect was believed to be highly trained with military experience. The shooting location is 53 miles southwest of Fort Worth, according to WFAA.

Kyle grew up in Texas and spent much of his time riding horses and participating on the school rodeo team. His life quickly changed when he decided to go into the military and became a Navy SEAL. He deployed four times to Iraq. Kyle held the record for number of kills by an American sniper. The Pentagon has confirmed more than 150 of his kills. The previous record was 109. For his service, Kyle was awarded two Silver Stars and five Bronze Stars with Valor. His autobiography, American Sniper, was released last year.

“When I grew up, I only had two dreams,” he told The News in January 2012. “One was to be a cowboy and another was to be in the military. I grew up extremely patriotic and riding horses. I went to college and was working at a ranch up there. Sun up, sun down, I was in a saddle. By the time I was 24, I decided it was time to go into the military and try it out. It wasn’t exactly the SEALs I was looking for at the time. I just wanted to go into the military and be the best.”

Kyle said he wrote his book because, “I wanted to be able to let people know about the sacrifices that not only people in the service make, but what their families go through. I knew this would give me a voice so I could speak about the guys I know who were killed. I wanted to get their story out and I wanted to raise awareness for veterans.”

“It is so hard becoming a civilian. When you are in the military, everything you do is for the greater good. And as a civilian, everything you do is for your own good. When you’re in the military, you are facing life and death every day. And then you come home and hear people who are unhappy about the little things. And you think, are you kidding me? Two weeks ago, I was shot. And this is your problem. …They train us how to become warriors, but then they don’t teach us and train us how to become businessmen.”

dirtfan21 Senior Enthusiast

dirtfan21

Posted
Posted

He was an amazing human being and an incredible soldier, guess he was needed to protect elsewhere. Sad I just watched a re-run of Sons of Guns not to long ago and they made a rifle specifically for his organization. Truly a great guy. I'd been wanting to purchase his book but I didn't want to see this final chapter...

NitroCherokee Enthusiast

NitroCherokee

Posted
Posted

Thank You and RIP sir

 

 

Sadly not much on the news about this. Whitney Houston OD's herself dead and the president speaks about what a tragedy it is, tribute concerts, Primetime "news" specials etc. Where have our priorities gone?

dirtfan21 Senior Enthusiast

dirtfan21

Posted
Posted

He is too busy trying to herd children and wounded politicians before us to take away our guns. No free time to honor one of the best soldiers of our time... Hey, that Ray Lewis is really something though huh? :sick:

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • needafix
      Brake Bleed Procedure

      By needafix · Posted

      I'm not sure if this should be a reply on this thread or a new topic, let me know if it's out of place. This my first post. Thanks 85077522 - ACDelco GM Genuine Parts Brake Master Cylinders. Anyone else had to replace this brake master cylinder yet. I didn't do any brake work, it looks like new parts and I've had the truck for about 4k miles. When it started to throw codes I did the calibrations with a bidirectional scanner and got the codes to clear but they came back so i did the routine; base bleed, automated bleed and final base bleed. All that with Bosch ES16-32N fluid (please look it up). That seemed to fix it but 100ish miles later it failed again so I ran the same process but with a pressure bleeder this time and got the same results, fixed for 100ish miles. The original fluid looked bad and I thought I got most of it out. The codes; P25A2, C05B0-00, C2A1B. I can get them to clear but not for long. The C05B0 indicates a leak in the front circuit (which is bone dry) so I'm thinking of doing the bleed process on that front again today and I don't know if that's taboo to just do the front but at this point it seems like it's worth the try anyway. The new master cylinder/module unit is supposed to get here today. But now I'm pretty much convinced this install is over my head. I've called several shops and some mobile guys that I know but this thing is like radio active material scary wise. I did get 2 local shops say they should be able to do it, one says he has the SPS2 programing capability. And with the battery disconnected is there supposed to be pedal resistance, mine is to the floor, then if I pump it I can get some resistance.
    • KARNUT
      Slate Electric Truck

      By KARNUT · Posted

      I wasn’t commenting on your post. Certainly wasn’t arguing. I was making an observation on my long term experience with supposedly proper length of driving for proper heat cycles. Works for me. Although I have seen water or vapor come out of exhaust when vehicles weren’t run very long and shut off. It’s very humid in the morning. Then hot and humid. 
    • Grumpy Bear
      Slate Electric Truck

      By Grumpy Bear · Posted

      Not what I said but I can work with it anyway. Complete combustion produces CO2 and H20. When it's cold enough you can 'see' it as water vapor but it is always there and more so the better the tune up. It's physics, not an argument. In a cold motor when the cylinder jacket is below the condensation temperature the water goes to the pan and not the PCV system. Heating the oil moves it from liquid to vapor where it is removed by the PCV system. When and how much depends on temperatures. Of the air, the water and so on. It has little to with the humidity. Water is a combustion product.  
    • Chuck FB
      2 speed transfer case optional now?

      By Chuck FB · Posted

      I can only guess as well that something was clicked on that brought you to the half ton choices by accident. By all means try again and chose the 3500 and sort out that its the cab and box configuration you want and choose four wheel drive ( rather obvious to have a transfer case ) and to make sure the dually isn't chosen. I find or at least did a couple of years ago when I was sifting through the options that it would sometimes jump ahead after choosing the series of truck and in this case 3500 and skip some of the other initial configuration choices and have to watch the heading bar and sometimes back up by choosing the first in the series of option break downs. I think sometimes the computer will remember items that were last chosen and skip over the first part. Anyway go through it all and depending on the trim level chosen and I think the LT is one that may fall into that where the option of having the 4 high auto transfer case can be chosen, where as a High Country doesn't show that option as it just comes with the fancier ( not necessarily better though in terms of potential problems ) transfer case but for sure both transfer case choices are equipped with high and low range in the HD truck segment. Like Newdude said who works at a dealership, its the half tons that are the ones that will come with the single speed unless certain options or trim levels are chosen that add the two speed transfer case but as your looking at an HD, you don't have to worry about that hot mess.    One item that at least didn't show up and not sure if it does yet or not in the HD options on the manufactures pubic website is the upfitter in cab switch option if one is desiring that. Unfortunately its not wired in at the factory but the panel with the switches is on the dash but the wiring harness to be installed gets tossed under the rear seat to be installed by whomever after the fact to complete the installation. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      Yesterday we brought home a 6yr  old Havanese dog from a nearby SPCA.  We've had her for 24 hours and we are delighted with how well she is adjusting to her new home.  It  was a huge decision to adopt a dog at this stage in our lives but we believe we made the right choice!   it was reported that her first 6 years were ones of neglect.  I think she's already realizing her life is going to get a whole lot better...  so is ours!    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...