Jump to content

Adding Navigation to Intellilink / MyLink System


Recommended Posts

  • Replies 618
  • Created
  • Last Reply
Posted

Bought the io6 module installed it nav and everything works on 2015 silverado however it wont read sdcard or usb drive.

Anyone else have this issue?

Posted

Did you get the updated USB plugs. I just ordered mine and it comes with new USB plugs in the center counsel

Posted

Did you get the updated USB plugs. I just ordered mine and it comes with new USB plugs in the center counsel

Where did you order yours from?

 

 

Sent from my iPhone using Tapatalk

Posted

Where did you order yours from?

Sent from my iPhone using Tapatalk

Mine came from MVI

  • 2 weeks later...
Posted

Here are a couple more video showing the CarPlay Retro:

2015 Chevy Colorado

https://www.youtube.com/watch?v=gd0g6e2F_68

2015 Cadillac Escalade

https://www.youtube.com/watch?v=6xfaZZ6ArCo

 

We were rushed on delivery after install so the videos are short and sweet...but show that it can be done without problem.

Here is a list of current fitments:

2014-2015 Chevrolet Silverado, Colorado and GMC Sierra, Canyon

2015 Chevrolet Tahoe, Suburban and GMC Yukon and Yukon Denali

2015 Cadillac Escalade

2013-2015 Cadillac ATS, CTS (2014-2015), SRX and XTS

2014-2015 Chevrolet Corvette

2014-2015 Buick Lacrosse and Regal

 

As usual...give us a TEXT (preferred) or call with any questions. 919-995-9523

  • 1 month later...
  • 3 weeks later...
Posted

"Apple Carplay projection up-gradable for an additional $400"

 

When you factor that cost in you might as well go with MVI. I was quoted a cheaper price to upgrade my IO5 module to one that includes CarPlay for less than this total cost.

Posted

"Apple Carplay projection up-gradable for an additional $400"

 

When you factor that cost in you might as well go with MVI. I was quoted a cheaper price to upgrade my IO5 module to one that includes CarPlay for less than this total cost.

 

Yea but SPEEDOMETER SALES AND SERVICE also does core refunds for certain modules.

Posted

 

so that would get you Carplay and factory nav for 1095.00 this is what I'm trying to decide get Carplay without nav or nav without Carplay or go all in and get Carplay and factory nav i have IO4 so i also need the 8 in screen hard to decide.

 

so that would get you Carplay and factory nav for 1095.00 this is what I'm trying to decide get Carplay without nav or nav without Carplay or go all in and get Carplay and factory nav i have IO4 so i also need the 8 in screen hard to decide.

Posted

 

so that would get you Carplay and factory nav for 1095.00 this is what I'm trying to decide get Carplay without nav or nav without Carplay or go all in and get Carplay and factory nav i have IO4 so i also need the 8 in screen hard to decide.

 

Here is the like to their direct site;

http://www.fixmygauges.com/2014---gm-truck-navigation-upgrades.html

 

They can do all of the above combinations and the upgrade to the 8" screen.

Posted

Thanks already had it down to them or mvi

 

 

Sent from my iPhone using Tapatalk

  • 4 weeks later...
Posted

Go to mvi, Anthony is awesome! Got my io6 working through him. When others could figure it out, he did and helped when he didn't have to. Guy is awesome to work with. All my future upgrads will be with mvi.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,791
    Total Members
    8,960
    Most Online
    d.lowrey
    Newest Member
    d.lowrey
    Joined
  • Who's Online   6 Members, 0 Anonymous, 2,636 Guests (See full list)

  • Latest Articles

  • Posts

    • I had a evap sol go bad a couple weeks ago. . I replaced it.  While watching live data at the time I saw I had some cylinder 1 misfires. No MIL but on live data I could see ~50 at startup and about 70 more after an hour a drive all on cyl 1.  I also noticed that the LTFT were -5% to -15% always.  And that bank 2 is always -3% richer than bank 1. Even across all driving modes, city, highway, etc it’s always 3% richer than bank 1. So I start with the misfire. Swapped coil, plug, and plug wires from 1 to 3. No follow. I got an Injector reseal kit, pulled the D/s injector rail, swapped #1 and #3 injectors, resealed them, reinstalled and retested.  The misfire followed to 3. So I ordered and replaced all 8 injectors, spark plugs, and plug wires. Also replaced the 1 time use fuel pipes under the intake manifold.  Injectors that were in the truck since new were  Part # 12668390.  I replaced them with # 12742701 Got from RockAuto. Pretty certain they’re genuine and the correct ones. I called a friend at a parts store who told me “the 12742701 were the correct superseded part # for the originals I was replacing”. So started truck after replacing all that and it’s running -15 - -30 LTFTs. I reset the fuel trims with GDS2 and drove it for a 60 miles trip each way. There have been no changes in the LTFTs.  I checked if the HPFP was leaking into the crankcase. I removed the pvc and watched the trims. No difference.  I checked the alcohol content and it was at 10%  I’m out of ideas here. Truck seems to run great. Just always rich on the fuel trims.  Anyone with any help or ideas would be greatly appreciated.  I ran an injector balance test just for the heck of it and it came back this. I’m confused.  I have gds2 and some other diag tools if anyone knows of anything I should test next.
    • Definitely needs to go back to the dealer. 
    • Fix one problem and find another.   Truck didn't have a thermostat in it so I flushed out the system today and refilled with 50/50 Dexcool. This truck is so old (LOL) that it has a sticker under the hood alerting people to the fact that it contains such. There is also an orange supplement with the owner's manual alerting the owner that "Your vehicle is one of a number of late production 1995 General Motors vehicles that use a newly developed engine coolant in the cooling system..."   I was still a little flummoxed by what seemed like a rich condition (exhaust smell, and a puff of carbon with a punchy rev). While watching the coolant temperature and testing the thermostat with my scanner, I happened to notice the IAT (incoming air temperature) to the intake was -40F. I know the temp is below average today, but I can still feel my face, and I was wearing shorts.   D'oh!! I realized I had never plugged the IAT back in, and the airbox was out while I was doing coolant. So I paused, reinstalled the airbox and plugged in the IAT, and viola. Things cleared right up, and I watched the coolant temp climb to a reported 198 degrees on the scanner (195 thermostat) and then it dropped to 194 (open) and then back up to 198 and held. Let it cool, came back, checked the coolant level and was satisifed.   Victory lap?   It needed more than the couple of gallons of gas I put in it from almost bone dry, so I ran it up to the gas station. It had earned it, or, at least I was pretty certain I wouldn't be draining or removing the tank anytime soon.   CEL popped on just as I was cruising a nice steady 40mph, just after coasting down a slight downhill curve.. Of course, it did, because, why let me enjoy not having dash emojis for a little while.   I just happened to have the scanner plugged in. I don't text and drive but I might scan and drive. Don't tell the police.   P0401, EGR flow insufficient.    Well, hello, EGR... ...my old friend! Welcome to the party, now that the engine reaches the factory-programmed operating temperature. I'm sure it was gagging on hostile, rich exhaust and carbon this whole time so I'll take it off and look again.   At least it's easily accessible, and worst case, about $65 to replace.   To keep, or to sell... Hmm. I want it running correctly either way. It's easier to sell when there are no fault codes.   It needs tires (they're aged out and cracking)   It could probably use an oil pan seal, or maybe the timing cover gasket/ junction with the pan needs redone because I've got an issue there that leaves a drop of oil on the floor.   If I do tires I'm sure they'll say the ball joints could use freshening, and, and, and, and.... At some point I'll have to stop. I can't (shouldn't) make it perfect, that's not what this rig is.
    • Take it back. That's about all you can do.  Mark 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...