Jump to content

2014 Z71 LTZ. Is the love it or return it program still in effect?


Recommended Posts

Posted

Bought my LTZ 5.3 on Christmas Eve. It has 500 miles on it now. I thought I would be happy with the 5.3, but I REALLY want the 6.2! Is there a way for me to upgrade without losing my a** off? Is the love it or return it program still around? I'm just wanting to upgrade! Any help would be appreciated!

post-126828-0-19043400-1388813264_thumb.jpg

post-126828-0-19043400-1388813264_thumb.jpg

post-126828-0-19043400-1388813264_thumb.jpg

post-126828-0-19043400-1388813264_thumb.jpg

Posted

I agree^^ lots of potential with the 5.3 -also, don't expect a race car these are pick-up's. Mine works just fine I'm deleting the muffler today and installing a CIA

 

 

Sent from my iPhone using Tapatalk

Posted

Traded it in 30 minutes ago. Lost $1500 on it though. 550 miles on the odometer.

 

And I did test drive both. Just thought I would be happy with the 5.3 and save a bit of money.

Posted

$1,500 for not thinking things through initially isn't a bad punishment.

Posted

You didn't get your initial tax back tho.. And you had to pay your tax on the new truck. I'm interested how you got away with it for only 1500 more when the option for the 6.2 and packages it comes with is like 3g's. With all the tax loses it had to be more.

 

 

Sent from my iPhone using Tapatalk

Posted

I was guessing $1,500 plus the additional cost of the 6.2 is what he meant...............

Posted

Oh. Sorry I didn't clarify. I traded for a Jeep. I paid 43k for the Z71 and they have me 42k trade value. So yeah, I also lost the 2k +/- in taxes. The 6.2 just wasn't worry the extra money this time. I will be back to buy a used one next year.

Posted

Didn't like the 5.3 so you traded for a Jeep? If your just going to wait till next year, why not just keep the 5.3??? Well, hope you enjoy it.

Posted

Thats why I leased..my next one will b 6.2 with max tow and 3.73s..sand dune iinterior w black exterior...but I love thr ltz I have now..5.3 w 342 gears is pretty stout

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • 2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...