Jump to content

Picture request - Silverado bug deflector pictures

Mossyoakglock

Recommended Posts

Mossyoakglock Senior Enthusiast

Mossyoakglock

Posted
Posted

The other day I was washing the truck and noticed a few more chips on the front of the hood and thought maybe it's time to look at putting a bug deflector on.

There are a few out there so I'm not sure which one I want to go with. I want something that is a low-profile as I can get as well. For those of you that have a bug deflector on your GMT-900 Silverado, can you post up a picture of it?

kstruckcountry Senior Enthusiast

kstruckcountry

Posted
Posted

Not a GMT 900, but I really like the AVS deflectors. I believe you can get them in clear, and even have them painted to match your paint.

 

Believe it or not they really do help deflect bugs over the windshield, and obviously save the hood.

&CDFiXER% Enthusiast

&CDFiXER%

Posted
Posted

Mine is clear, I always get the rear side of them painted to match the truck color. I can take the picture if you want, but it is not painted yet. Only had time to dry fit it.

&CDFiXER% Enthusiast

&CDFiXER%

Posted
Posted

Just got home. Kind of dark, my phone takes crappy pictures at night, and the nose of the truck is @12" away from the garage door. Will get a picture in the AM. It is a "Stampede" brand I purchased from the local truck shop.

&CDFiXER% Enthusiast

&CDFiXER%

Posted
Posted

Here are the pictures. I have only dry fit it and test driven it. Months ago. Bought 'new' house. Been spending all spare time getting the 'new' house and the old house straightened out. Plus lots of other issues this year. Glad I saw this thread, I had better get some time to paint it, plus the shop is put back together now.

post-80559-0-96760800-1411306276_thumb.jpg

post-80559-0-18983700-1411306292_thumb.jpg

post-80559-0-72721900-1411306300_thumb.jpg

post-80559-0-57645000-1411306310_thumb.jpg

post-80559-0-96760800-1411306276_thumb.jpg

post-80559-0-18983700-1411306292_thumb.jpg

post-80559-0-72721900-1411306300_thumb.jpg

post-80559-0-57645000-1411306310_thumb.jpg

post-80559-0-96760800-1411306276_thumb.jpg

post-80559-0-18983700-1411306292_thumb.jpg

post-80559-0-72721900-1411306300_thumb.jpg

post-80559-0-57645000-1411306310_thumb.jpg

post-80559-0-96760800-1411306276_thumb.jpg

post-80559-0-18983700-1411306292_thumb.jpg

post-80559-0-72721900-1411306300_thumb.jpg

post-80559-0-57645000-1411306310_thumb.jpg

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,842
    Total Members
    8,960
    Most Online
    CaptainDad
    Newest Member
    CaptainDad
    Joined

  • Who's Online   4 Members, 0 Anonymous, 585 Guests (See full list)

  • Latest Articles

  • Posts

    • asilverblazer
      Slate Electric Truck

      By asilverblazer · Posted

      I like the idea.  I would pick diesel if I had a choice. I need pictures though.
    • newdude
      Help purchasing a touch screen digitizer

      By newdude · Posted

      I've installed cheap eBay new aftermarket digitizers before.  They work.  Did a bunch of Cadillac CUE (aka Cadillac's MyLink) for someone years ago.  They all worked fine after the repair.    That number 22740886, that is a component part # for GM.  You can use it to search, but its not something that's obtainable at the dealer level.     So pretty much any of these will work - 2015 Colorado Digitizer for sale | eBay
    • asilverblazer
      give me some tips to make my truck look better

      By asilverblazer · Posted

      Black bumper and the later years Z-71 style color matched grille.
    • fondupot
      Exhaust heat while towing!

      By fondupot · Posted

      You can install tailpipes that direct the exhaust sideways vs the OEM one that goes straight back. There are several on the market, do you own research. HOWEVER, you need to make sure the Venturi vents are still intact, otherwise it will throw a engine code. There is a sensor somewhere that detects back pressure on the exhaust. And if it doesn't collect the correct metrics, it will throw the truck into limp mode. 
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      "Teardown" is complete. Head surfaces are clean and ready, new intake is prepped and ready. Coolant drained and water pump is removed, radiator is removed, new hoses and pump are ready.   The replacement intake is also from a '95 (with I think 260k, the odometer said). Noticeably less pitting where it covers the rear coolant passages. I'm not sure if that's a tribute to more frequent use, more frequent coolant changes/upkeep, or if the intake was machined at some point. But it appears I found a good one.   My coolant hoses were original, and the lower hose still retained the factory spring inside. It's not really rusty, but it's got deposits all over it. Unsure if I should re-install it (will thoroughly clean it first). Someone said hose technology has gotten better since 1995 (has it?) and I don't need the spring. I think modern EPDM is what made those hoses last from 1995-2026, so it's a question of how much suction can the water pump really pull, and will it collapse the hose without a spring?   I'm stopped and waiting for parts, however.   When I first brought the truck home, the fan was intermittently hitting the radiator shroud. I could see someone had monkeyed with the shroud (put a bunch of cardboard as a spacer between the upper/lower shroud halves. Someone said the motor mounts have likely failed and the engine has sagged. I wasn't sure I believed that. The engine is really solid in its mounts: To remove the old intake I *just* nearly permanently welded to the heads with freshly cured RTV and gasket snot two weeks ago, I literally had to use the arms on my lift and a chain with a bolt attached to the intake to pull it loose. It almost picked the front of the truck off the ground before ....scuuuuuuuuuuup.... I could actually hear the gaskets tearing and it broke loose and the whole truck settled back down. Motor barely moved.   SO, those parts I'm waiting on... The lower radiator mounts/bushings had completely failed. The radiator needs to be insulated from the rad support, and the bushings help the rad stand at the correct height. The plastic "baffle" was also destroyed at some point. Someone had attached the shroud to it incorrectly, overlapping a joint that should have been underlapped, creating another suspect issue potentially causing things to hit the fan. Broken tabs, side is busted off, and it's perma-formed/bent where it was jimmied incorrectly.   The baffle? Unobtainum. Long since discontinued from GM, of course. Aftermarket/capa/chinese? Also unobtanium. In GM's infinite wisdom, it appears there are at least two different variations whether the Blazer is 2 or 4 door, and I can't yet tell if they shared the same part with the S-pickups. Plan B, if I can't find a viable used one, will be to create a bracket to re-assemble the critical joint I need to seal a gap with the shroud. But that will bug me, it won't be...perfect.   The water pump bolts appear to have been installed with...plumber's putty. I guess, sure, if it works...? I've found a few "backyard fixes" like that. Someone's been here before....   If I can't find someone to jam bamboo under my fingernails to fill my free time this week I think I'll install the driver's power window motor and replace the rear door speaker that's inop. I've got a genuine GM "9.5" ohm working replacement. Why GM used a non-standard resistance....nevermind. Of course they did, you can get more sound from a cheap factory amp that way.   And the saga goes on...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...