Jump to content

Recommended Posts

Posted

I've been looking for black sill trim for my '15 High Country crew cab. I can't seem of find

any for sale on Ebay.

 

Does anyone have the GM part numbers for the black version of the sill trim pieces?

 

I'm slowly de-chroming the sides of the truck. Painted door handles and mirror caps from

Ebay seller, removed the side High Country badges and tailgate bowtie. Still need to think

about painted body side moldings. Any suggestions?

 

Posted

I just replaced the chrome with black on my 2015 SLT Crew cab. The parts numbers have recently changed. The numbers I have from the parts I obtained and are now on my truck are

 

Front Belt moldings 23227165 and 23227166

Rear Belt Moldings 23227174 and 23227175

 

Please check these numbers in case Ive mis-typed any thing. All 4 moldings came with the plastic clips attached and in substantial cardboard tubes.

 

I found the most useful tool to release the clips on the moldings that came on the vehicle was a putty knife with a 1" wide blade. It is the same width as the clips and prys (?) both 'hooks' on each clip at the same time.

 

Richard E.

  • 3 years later...
Posted

I had my parts guy look up these part numbers, he gives me a break on price and said these parts are priced: $37.61, $40.32, $98.19 & $87.24.

 

They cheaper anyplace else?

Posted
1 hour ago, samckitt said:

I had my parts guy look up these part numbers, he gives me a break on price and said these parts are priced: $37.61, $40.32, $98.19 & $87.24.

 

They cheaper anyplace else?

From GMPartsDirect.com: $35.32, $37.85, $81.93 and $92.21 but I think shipping is extra. Unless you can find some pulled from a Silverado, those are around the prices you'll be paying.

  • 2 weeks later...
Posted

Why dont you guys see if someone wants to trade. I had the black ones on my truck when i bought it. I took them off and cost me about 350 for all 4 chrome pieces.

  • 3 months later...
Posted
On 11/22/2018 at 10:30 AM, RACERX7775 said:

Why dont you guys see if someone wants to trade. I had the black ones on my truck when i bought it. I took them off and cost me about 350 for all 4 chrome pieces.

I heard they are a real PITA to get off without breaking the little mounting clips.

Posted

Trade is the way to go. There are plenty of people looking to swap. Just post in the classifieds here. I’ve done it.

  • 2 years later...
Posted

In the Fort Worth area with chrome trim looking for black trim...Swap or buy.

2018 GMC Sierra SLT Crew Cab.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Oil pump noise was discussed before.  I will try to remember to record a remote start later this morning. 
    • There are probably a few threads talking about fuel mileage but this one seemed to fit the stats I have seen based on my typical local driven route but with different outcomes based on different seasons/temperatures. I have a few hundred pounds of items that consistently ride on the truck at all times such as a bak flip cover, rubber bed mat, tools and extra fuel so I would be something over 8100 lb without me in the truck. All these examples are based on a 100 mile round trip to a town plus running around town so maybe 110 to 120 miles in total for a trip. Using regular fuel and I assume it always has some ethanol in it but don't know the percentage they blend in. Also speed wise I am going at 62 mph and non aggressive driving although less speed yet if its crappy winter condition roads. I am going by an initial reset of the computer generated fuel use numbers averaged over a couple of thousand miles or so for each weather/season so they may be more optimistic then actual hand calculated numbers. Basically this is painting a picture of doing the same drive but seasonal conditions and temperature being the major variable to the end result. Oh and although I am in Alberta Canada, I am converting it to miles per US gallon so there is no confusion.    So winter time it gets cold here, no real surprise there and the roads can be clear at times but also often have packed rough snow or are are driving through loose snow ( they do a poor job of plowing the highways ) and yes this includes the extra idle engine time due to trying not to freeze ones butt off. 12.7 mpg is what I was getting during the winter months on average.    Then during the spring when it was around the freezing point and the highways are clear of snow, I was getting around 14.25 mpg.   Summer time, I have been getting around 15.15 on average but certainly some of the trips showed quite a bit better fuel mileage, so much depended on how much or little I had driven around town and number of engine restarts after sitting for a while at each location. But stating a best fuel mileage trip to town pretending that is what the truck gets on average is fooling ones self for sure !.      As I said in a different post, I had driven a 645 mile trip over a couple of days stint to a different destination then these other daily to town examples above, and was done during the summer with nice weather and not bucking a head wind, also keeping at 62 mph and its a rolling landscape type highway drive ( this isn't southern Alberta or Saskatchewan flat lands ) Hand calculated fuel mileage in this case though and it came out to 17.65
    • On my wife's 2020 Blazer (~69000 miles), we started to notice the brakes pulsating at faster speeds. Typically around town you don't notice anything, but highway/interstate driving you will notice it. I decided to pull of the front tires and look at the brakes. I figured with the milage, the pads should be wearing out to their life span, but they actually looked decent. Still with "meat" on them. One pad has a ridge wearing in it, and that same rotor is showing the ridge too. That's not the concerning part...the other rotor appears to have a raised bump on it!  The picture make it look like a pimple! Very odd and strange! NOTE: These are the factory brakes and rotors.   I'm attaching pictures of the front brakes and what they look like ate ~69000 miles.
    • 2024 Chevrolet 2500 HD Custom 6.6 Gas Canadian built Truck  I tried to search for my previous thread on this topic but cant find it so my apoligies  for starting another one    #1   Since we have owned our truck purchased new it has this strange noise after using the remote start function  you press the remote start and you hear it start but right at the end of it starting it almost seems like it wants to start again after the truck is running .   There is no gap in time it is right at the end of the start . Almost sounds like when you have started a car/truck and its running and then you try and start it again and you get that grinding noise ,sort of     #2  You can only hear this if you are standing outside of the truck and near the truck  you cant hear it when you start the truck from inside  the cab . So it may very well be happening when starting the truck that way as in normally    #3   This only happens when it is started after sitting . For how long I don't know but it happens after sitting overnight for sure and it wont do it if you stop the engine after starting and then start it again  I have had it in to the Dealership before concerning this but they did not have the truck  when it was cold to hear it . Now its back in the Dealership left it overnight so they could possibly hear the problem . They said they tried and nothing happened . Well they did not know what they were listening for . I started the truck remotely and BINGO it makes the noise . Oh that sounds weird they say . We need to look into it ! I have left for this week at the Dealership    Does your 2024 2500 HD gas do this ?  Any of you fellas care to take the time and trouble to film this operation from a cold start  so I can hear what your sound like  Really  would like to know if this is anormal sound  Thank You Fellas !!
    • 2026 Z71.  The other day I was backing a trailer into the barn.  The alarm was going off just because the trailer was in the field of the warning sensors when you get too close to something.  For some reason now the warning alarm doesn't work anymore.  It used to go off when I was just normally backing my truck into garage.  I still have the guidelines in the back up camera.  Is there a button or something to push to turn the sound/Alarm on and off?  I have the touch screen in this truck.  There isn't a "P" on the dash except for the parking brake.  I can't find anything in the touch screen under settings or vehicle.  Thank you in advance.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...