Jump to content

Recommended Posts

Posted

So you are running E85 on a vehicle not suited to run on it?

 

I'm running E85 in my 2015 5.3 without the FFV option. It runs it EXACTLY as I have experienced in previous FFV trucks and as others have reported on the 14+ FFV 5.3s. It is more responsive, smoother, shifts better, and seems to have more power. It is getting approx 20% less MPG, which means it is adjusting fuel injection for the increased ethanol content.

Posted

 

I'm running E85 in my 2015 5.3 without the FFV option. It runs it EXACTLY as I have experienced in previous FFV trucks and as others have reported on the 14+ FFV 5.3s. It is more responsive, smoother, shifts better, and seems to have more power. It is getting approx 20% less MPG, which means it is adjusting fuel injection for the increased ethanol content.

 

Can you go look at the RPO codes on your glovebox and tell us if you have either or both of these RPO codes?

FHO

FHS

Posted

So you are running E85 on a vehicle not suited to run on it?

In a nutshell, yes.

Posted

 

Can you go look at the RPO codes on your glovebox and tell us if you have either or both of these RPO codes?

FHO

FHS

 

It has FHO but does not have FHS. This is a 2015 Sierra DC, 4x4, SLE with the 5.3, if that matters.

Posted

 

It has FHO but does not have FHS. This is a 2015 Sierra DC, 4x4, SLE with the 5.3, if that matters.

FHO is to use E10, FHS is is E85
Posted

 

It has FHO but does not have FHS. This is a 2015 Sierra DC, 4x4, SLE with the 5.3, if that matters.

 

Yeah, I wouldn't be running E85. The FHS option provides an alcohol sensor & enables the correct tables in the ECM.

Posted (edited)

 

It has FHO but does not have FHS. This is a 2015 Sierra DC, 4x4, SLE with the 5.3, if that matters.

Without FHS it won't have the ethanol sensor.

 

For 2015 Sierra:

FHS NEW! E85 FlexFuel capable
- Included with (LV3) 4.3L EcoTec3 V6 engine. Available to order with (L83) 5.3L EcoTec3 V8 engine.
(In 2014 it was standard on 5.3 as well)
(In 2015 it is 0ptional with (L83) 5.3L EcoTec3 V8 engine with (MYC) 6-speed automatic transmission or included with (LV3) 4.3L EcoTec3 V6 engine.) ---- which means it is not available in combination with the 8 speed transmission
Edited by redwngr
Posted

 

... which means it is not available in combination with the 8 speed transmission

 

 

Wow, nice catch there.

Posted

 

Wow, nice catch there.

Yes, I really wanted to add it to my 2016 (SLT/5.3/8spd/max tow) -- but it can't be done (through GM).

Posted

Just do the next potential owner of the truck a big favor if you keep running E85. Let them know you continuously ran E85 in the truck, even though its not E85 compatible. Theres more to it than having bigger injectors and pump.

  • 4 years later...
Posted

I know this is an old post, but I just rebuilt a 14 Silverado that was a total. I used a engine / chassis from a 15 Silverado that was a rollover but good straight frame. I used the 14 engine computer since it worked with the key from the 14 cab.  I have the code for the ethanol sensor because the 15 frame didn't use it.  My question is how to reprogram the ecm, or can it be to eliminate this code from staying on.  Or how could I add the sensor so the computer would see it.  I tried the 15 ecm and reprogramming the key but it didnt work.?? It put it in theft mode.  Do you have to use a new chip key for the key program to work? I was trying to reprogram the original key?  Runs perfect other than the check engine light on. I'm not in an emission county so doesnt bother me til it's time to sell.  Thanks

Posted

The 2015 computer doesn't work because it would require a full program flash to the match the PCM and TCM, then the key needs to be programmed.

 

The 2014 can be tuned with an aftermarket tuner to disable the flex fuel system and remove the codes.

 

Or you can steal the flex fuel sensor and hard line off the 2014 frame and install it back on the 2015 frame. Or buy a new sensor, plumb it in near the fuel tank and extend the wiring to reach it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined
  • Who's Online   1 Member, 0 Anonymous, 602 Guests (See full list)

  • Latest Articles

  • Posts

    • Even tougher is the 5.0 / 302. That's what this one has.    https://postimg.cc/Z9XRrCSg   https://postimg.cc/4n3F3yzY   Just realized I had the airbox removed in the engine pic, lol.
    • Yep! This should be a pin somewhere as @pgamboa really dives into all of this. Thanks for reposting the link!
    • I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...