Jump to content

Recommended Posts

Posted (edited)

Have any of you replaced the factory spare tire under the truck with a larger one? My truck came factory with 18" wheels and I have upgraded to 20" with larger tires as well (33"). I have also had a Borla exhaust installed, so not sure if that changed the space allowance for a larger tire under there.

 

Also, can you mount a regular steel rim under the truck or does it require a special rim in order to be attached under there? Never released the spare so I have no idea.

 

I came out to a nail in my tire this morning and I caught it early enough I could drive to get it repaired, but want to prepare for a worst case scenario if I have blown a tire.

 

Thanks!

Edited by SilveradoSaver
Posted

Just upgrade the tire to be simple. I wouldn't want a nice wheel under there. If you are set on putting a larger wheel under there, make sure the center hole is the same size as the 17" wheel you have as a spare. Also with a nicer wheel, the bottom of the winch that holds the wheel up there will be rubbing on the wheel face. Some trucks came with a nicer wheel and some have the steel 17" with a bunch of holes

Posted

Just upgrade the tire to be simple. I wouldn't want a nice wheel under there. If you are set on putting a larger wheel under there, make sure the center hole is the same size as the 17" wheel you have as a spare. Also with a nicer wheel, the bottom of the winch that holds the wheel up there will be rubbing on the wheel face. Some trucks came with a nicer wheel and some have the steel 17" with a bunch of holes

 

 

Thanks for the info.

 

I wasn't going to put the same wheel I have under the truck; I was just going to buy a plain 20" steel rim and the same tire I have on my truck now. I figured with all the crap kicked up under the truck too putting a nice new wheel to match the rest wouldn't be smart, haha. Plus, hopefully I never need it...

Posted

Mine is this as is the one on my friends 2014 SLT with a March 2013 date.

c54e10e2cc3b6851305c267efa8c98c4.png

 

This is the nice one from a 2009 Tahoe Hybrid and on some newer trucks.

d8b601e21edd794649626a5c187d4dbb.png

 

But if you come across a 20" that works, I want to know because I run an odd size. The closest 17" I can run is a 255/65R17

Posted

Run the steel wheel you have and just buy a bigger tire (if it'll even fit). I wouldn't worry about getting a matching wheel size, waste of money. And if you're gonna stick with 33's then you should be fine with the factory spare for short distances honestly

Posted

I doubt you can fit an equivalent tire under there, but if you went through all the hassle, I'd bet you will never need it.

I had a flat years ago, put a smaller tire on the rear, the limited slip differential kicked in on a hard turn, I would not worry bout it until it happens, then, if it's a rear decide if it's worth rotating front to rear then spare on the front.

Posted

like stated above even with trucks that have a 20" rim they use a 17/18 inch spare tire with an equivalent tire to match the overall height.

Posted

Thanks for the input guys. I will probably keep my 17" wheel but put a larger tire on it (if there's room; still need to check). I'm guessing a 285/70/17 is the closest I'll get to 33" (without going over)?

Posted

Thanks for the input guys. I will probably keep my 17" wheel but put a larger tire on it (if there's room; still need to check). I'm guessing a 285/70/17 is the closest I'll get to 33" (without going over)?

 

I believe Rawyzf has a 285/70/17 Cooper STT Pro in his spare tire slot, but not totally sure if he mounts it inside with it. He made a post awhile back with his spare tire next to his mounted tires at that time and said it was his full size spare, but idk if he leaves it in his garage, bed of his truck under the cover, or if it ended up fitting into the spare tire spot. I think I saw someone else say they fit a 33" spare tire without issues, but can't find that post. I'll quote Rawyzf's spare tire post from his build thread. It's on page 14. http://www.gm-trucks.com/forums/topic/171035-rawyzfs-2015-silverado-z71-build/page-14

 

 

My full size spare with Cooper STT Pro, white letters out.

 

Let me know thoughts on the white letters out, I like it. As soon as I have some extra funds, I plan to put Cooper STT Pros all around.

 

04bcdb03420eb61f6d1de6fd40fdf4d3.jpg

 

2fe4b84179e938cee3d509a68646424f.jpg

 

5fb8f49dfc7bb24f2e969ffc5349dfdd.jpg

 

Sent from my SM-G930V using Tapatalk

  • Like 1
Posted

 

I believe Rawyzf has a 285/70/17 Cooper STT Pro in his spare tire slot, but not totally sure if he mounts it inside with it. He made a post awhile back with his spare tire next to his mounted tires at that time and said it was his full size spare, but idk if he leaves it in his garage, bed of his truck under the cover, or if it ended up fitting into the spare tire spot. I think I saw someone else say they fit a 33" spare tire without issues, but can't find that post. I'll quote Rawyzf's spare tire post from his build thread. It's on page 14. http://www.gm-trucks.com/forums/topic/171035-rawyzfs-2015-silverado-z71-build/page-14

 

 

 

 

Thanks! I just sent him a message to see :)

Posted

Well I took my truck into a shop today and can tell you the 285/70/17 spare tire I wanted to mount under the truck does not fit. It would end up hitting my aftermarket exhaust and trailer hitch.

Posted

Did you ever hear back from him? I'm curious what he does with the spare (if he even carries it with him), or if he just mounted that tire on temporarily for the photo perhaps?

Posted

Did you ever hear back from him? I'm curious what he does with the spare (if he even carries it with him), or if he just mounted that tire on temporarily for the photo perhaps?

Yes, it's in the bed of his truck :(

  • 3 months later...
Posted

I bought a 255/75/17 which is a 32.1, I feel comfortable that will fit or I can make it fit. Will know in a few weeks.

 

Anyone hear a more definitive answer from anyone or anywhere?

 

Tyler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,211 Guests (See full list)

  • Latest Articles

  • Posts

    • I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
    • Atlas, you kill me As aggravating as a project like this can be you have been unable to hide your fascination with learning and using that angst against this beast like a Ninjitsu Master. It amuses you, admit it now.      BTW, love your writing style. 😉       
    • I gotta say, I'm enjoying your narration. The troubles you've been having are amusing as you describe them. It's good to see that you're finally getting some satisfaction out the old beast though.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...