Jump to content

Water Leak from windshield

Chevy1500/2014

By Chevy1500/2014
in Troubleshooting & Recalls

 Share

Recommended Posts

Chevy1500/2014 Enthusiast

Chevy1500/2014

Posted
Posted (edited)

I have a 2014 Chevy Silverado Crew Cab LT...today it has been raining none stop, when i got into my truck this morning the floor board on the driver's side was soaked. A leak is coming from right around the left foot rest, black box area and it is a steady leak...I noticed that on the passenger side of the truck on the outside of window the cowl panel? is bent a little and a leak may or may not be coming from that area. Im not sure though. Anyone else have this happen to them??

 

OR does anyone know the part name so i can order it???

Edited by Chevy1500/2014
GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted

Hello Chevy1500/2014,

 

I’m sorry to hear about this water leak concern you are experiencing and understand how frustrating this can be. Please send us a private message so we can discuss this situation in greater detail. Thank you.

 

Best regards,

 

Anthony

GM Customer Care

Pacfanweb Enthusiast

Pacfanweb

Posted
Posted

Likely from the antenna. I have seen a few windshield leaks, and one or two roof seam leaks, and all can end up in the same place.

  • 2 years later...
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
On 2/23/2020 at 9:49 AM, LoriB said:

My 2017 Chevy Silverado has a very bad leak onto dash. 

Can you see where it is coming from, headliner, or actually water on the windshield? 

Edited by JimCost2014
  • 11 months later...
Jeff Kessenich New Member

Jeff Kessenich

Posted
Posted

I've got the water leak also on my 2014 Silverado Crew Cab.  Also on driver's side.  Looks like water coming through inside of dash, dripping onto emergency break pedal, then onto the floor.  Happens every time it rains.  What was the advice to the last person with this problem?  Should I just caulk around the edge of the windshield?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined

  • Who's Online   1 Member, 0 Anonymous, 162 Guests (See full list)

  • Latest Articles

  • Posts

    • bwiese
      upgrading speakers on 2026 std cab WT...

      By bwiese · Posted

      I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • RyanbabZ71
      RyanbabZ71's 2019 High Country

      By RyanbabZ71 · Posted

      Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Snowcamo
      No high speed fans...

      By Snowcamo · Posted

      Ok, I got the all the codes. What do you all think would be a place to start?
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      3.39 Kroger’s in Montgomery Texas. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...