Jump to content

Denali Center Console

Boomshekah

Recommended Posts

Boomshekah Enthusiast

Boomshekah

Posted
Posted

i FINALLY got all the parts for the denali center console....atleast i think i do. I have the extension area, the main shell, lid, rear cover, rear audio controls, dirver info center, 6 disc changer, uppper console bezel and cupholder. I have not received all of these parts yet as i am still waiting for some of them to be shipped. I was wondering if anyone here has done the console swap. How involved is the wiring? I am not an expert at that sort of thing so i am thinking about paying to have it done. Any pics would be GREAT. Also i will have an extra cupholder, upper console bezel, and driver information center once i am done. If anyone is interested, let me know. It will be a couple weeks until i do the install as i must re-dye the console and re-cover the leather armrest to match my "blue" interior. I was either thinking about dying the lower carpet to match my interior carpet or removing the lower carpet all together and covering it in vinyl. Any suggestions on this matter are also appreciated. I was told by several interior shops that it is wise not to dye the leather as it can rub off. Thanks in advance.

-Randy :smash:

sin Enthusiast

sin

Posted
Posted

Hey, I did the console swap late last year. The only problem I had was the DIC. I did get help from JP Customs on that. Everything else I did myself. I used vinyl dye for the actual plastic parts and had a bud at an upholstery shop wrap the carpet. I even put in a Cadillac clock instead of the cig lighter. Let me know what you need help with. It is a sweeet mod :(

stlmaj Enthusiast

stlmaj

Posted
Posted

That is one nice looking interior!! WOW!! Almost makes me want to do it!

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • hotfish
      Forward collision and lane keep assist still a problem on 2022 refresh?

      By hotfish · Posted

      Did you ever get this worked out? Mike is doing the two start thing now too. This is after a new camera back in December. 
    • KARNUT
      AFM Disabler Question

      By KARNUT · Posted

      I’m doing an experiment on a vehicle I don’t have much money in. I’m going by the premise that after they last 100K miles they were no mechanical problems with assembly. Or defects with the parts. With oil changes by the minder for the first 127K miles when I acquired it. I quickly went through low mileage oil changes then settled on 5k oil changes with close to 170K miles on the vehicle currently. I did have the option to turn off the cylinder deactivation. I didn’t on this vehicle because it’s in ECONOMY mode at least half the time. It should be a no brainer frequent oil changes are the key. The manufacturer gets away with the long oil changes with its severe service  maintenance. Just ask them what is normal. 
    • baglie1
      Hot air constantly blowing through floor vents, drivers side only?

      By baglie1 · Posted

      Even set to "recirculated", the air pushes out and is hot. I have noticed that sometime it doesn't want to switch between recirculated/vented air. Say it is set to Circulated Air and I want to switch to Vented, when I click the Vented button, it just quickly lights up/clicks and immediatly switches back to Circulated. It's done this a few times now. So maybe it is an actuator getting stuck? But then, that doesn't explain the hot air when everything is off does it?
    • Chuck FB
      Gas Prices

      By Chuck FB · Posted

      I wonder what the price is out at the coast, Big Sur or other out of the way locations as I bet they are charging quite a premium over the in land pumps. 
    • Chuck FB
      2 speed transfer case optional now?

      By Chuck FB · Posted

      Were you looking at the HD trucks on the GM website or the half tons as that makes all the difference. As far as I know there are only two options for the HD trucks and that is the standard 2 speed transfer case or the 2 speed transfer case that has the added 4 high auto feature and they put that transfer case by default into the LTZ and High Country although its optional in the LT and not sure if its available in the work trucks.    The half tons, that is where its been a total mess in my estimation for a few years now with most trucks below the top trim having the single speed transfer case as standard but with the option of having the two speed such as one would get by choosing the Z71 package, however then not being able to get the two speed transfer case with the towing package unless it was a higher trim truck AND had the 6.2 gas so one could combine the towing package gearing diffs with the two speed transfer case. Having said that if its a trail boss package then it gets the two speed transfer case but not necessarily able to get the tow package as it would depend on trim level and engine chosen. Believe me, people have bought the GM half tons assuming "of course it will have a two speed transfer case" only to find out after when they really pay attention to what they now own .... crap, there is NO low range !.    I don't believe Ford or Ram have gone that way yet with their half tons but like I say its been a few years now that GM has done this with the half tons. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...