Jump to content

Does your truck dent easily

DorkWeedCashMeOutside
 Share

Recommended Posts

diyer2 Senior Enthusiast

diyer2

Posted
Posted

The body metal is thin.

My 93 Chevy sat outside all the time. Went through many hail storms in 20 years. 

Not one body dent.

This 2012 I could dent with a knuckle tap.

 

:)

poconojoe Enthusiast

poconojoe

Posted
Posted

Mine had several tiny dings when it was new from the dealer. (Couple months ago) it was on the driver's side as if it were peppered with hail or small stones. No paint damage, just dings.

It's amazing what the dealer's PDR guy did. Not a trace left! Not a single wave! Nothing! Even with my truck's black mirror like shine...nothing visible.

I was leary about the purchase of the truck, but they assured me the dings will be gone...and they are!

So, to the OP...do yourself a favor, stop losing sleep over it and get in touch with a good PDR guy. You'll be amazed.

  • Like 1
  • 6 months later...
Miguel Olea Enthusiast

Miguel Olea

Posted
Posted

The metal is too thin.  I put a dent on my cab trying to remove a bird poop stain with some light pressure and polishing compound.  And since I live in Northern CA, my truck is always covered in ash from the fires.  I was trying to thoroughly wash the top of my crew cab.  Standing in the bed, I reached over the back window to try and wash the cab and with my left arm I very lightly supported my self  on the angled rails of the cab.  Guess what?  A large shallow dent!  Needleless to say I got pissed and worked at them for an hour or so with several orange harbor freight suction cups.  I pulled them out 95% of the way, but still pretty cheesy if you ask me.  And I'm by no means a big guy. 5' 7" 180 lbs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Aimatdeer
      Ac not keeping up

      By Aimatdeer · Posted

      Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Paid $2.72 for E85 today.
    • Atlas
      Gas Prices

      By Atlas · Posted

      Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...