Jump to content

Vent-anchored cell phone mount?


Trucko20

Recommended Posts

Posted

Thinking about getting one if these in my 2014 LT. Anyone have experience or an opinion on them?

 

There are a few different types. I feel like the ones that sit up on the dash would put the phone too far out of reach.

Posted

I have one in my camaro. I like it. Bought it from amazon. Holds my iphone7 fine. I also have one in my truck but it’s attached via 3m tape

 

3c1934acd323a8a63ff1d44dac314aa3.jpg

Posted

Im not a big fan of those, I use a window suction mount. It has a long reach and puts my phone even with and above my blinker switch. No risk of breaking the vent and is d durable.

Posted

I use one though mostly for rental cars. The drawback is that it forces the direction of airflow and it may be slightly different than you want. I've also had it pop off a few times on bigger bumps. That said, I still prefer it to a window mount. I use a non-magnetic one as the magnetic ones may interfere with wireless charging. https://smile.amazon.com/gp/product/B017HME9DC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

 

If you want a great mount try Pro Clip. http://www.proclipusa.com/vehicle/dashboard-mounts/9734-chevrolet-silverado-1500-series/2014. Expect to spend about $70.

Posted

I had a Steelie vent mount for my phone, worked pretty good, other than taking curves or making turns, the weight of the phone would swing the phone/vent to the outside of the turn/curve.  Found mine at Home Depot for $20-40.  Another downside, when you upgrade your phone, you have to get a new magnet for the back of your phone.

 

image.thumb.jpeg.4b4eb855392b247e8870535c53b14938.jpeg

Posted

https://www.proclipusa.com/?gclid=CNS429nW7dYCFRBLDQodHugOCA

 

I have the one that attaches on the passenger side vent, I've had a few other mounts but they all failed over time. I picked up a cheap stick on magnetic holder a while back so I reused that and it's holding up fine so far. The issue with a mount that sticks to the dash I've found is that there aren't any really flat spots to stick one in a k2 truck.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Hey thanks yall for the info. It apparently was the key fob - the "reserve" key fob works just fine. Yall were all over it. Great input! JRD
    • I just bought one of these.   https://www.topdon.us/collections/diagnostic-tools/products/artidiag-pro   Yeah, it`s got a cable. $250/year after 2 years. Do I want more? Yep. But, I`m not working any more and can`t afford a whirlpool in my tool box.
    • Why don't I have a good scanner? I've always wanted one when I've needed one.   My latest reading says I don't need to do a relearn on the ckp sensor on a 1995 with OBD 1.5. The relearn is prescribed for the later-model 1995's which shipped with actual OBD II when GM completed the transition in prep for the 1996 MY. I need to confirm that. Did you know forums are disappearing? Knuckleheads on Facebook... it's not the same. It's just not.   So, scanners. Again, shooting myself in the foot for having eBayed my Snap On MT2500 "brick" with all the adapters. Not that I couldn't buy another but those are getting quite old, and mine wasn't new enough to work on 2000's vehicles.   Damn it (as I'm scanning my email between paragraphs here). Did you know there's a 2000 Jimmy 2-door on BaT that's ending this morning? It's local. I want it. 14k miles. Absolutely beautiful.   Back to scanners. MT2500's are old. Solus, now that could be a contender. There's a ~2008 Verus with a system error that's basically new in box for cheap. Hmm...I'm not sure about a scanner that runs an archaic version of windows (95 or CE, I can't tell).   I want the ability to reset and rotate TPMS, test individual modules, bleed ABS, electronic parking brake controls for servicing brakes, relearn procedures and other bidirectional controls.   Snap On does an MT2600. It's a new model as of last year, marketed as their "entry" scanner. Entry? Only where $1900 gets you through the doorway plus, I'm guessing, $1000/year if you wish to keep it current. So goes scan tools actually designed for production environments. Want decent products with excellent support, you pay for it.   Everyone is raving about Autels and TopDons and Foxconns and all these newer brands that are selling the $500 "prosumer" scanners for backyard hacks like me. They're tempting...honestly. Updates are cheaper, base prices are remarkably cheaper... And you get to deal with bugs and translation whoopsies and, well, just don't use it on anything expensive, OK? Having a dealer replace an ECU because it needs to be re-imaged after an adventure in scanning is no joke. But I think most people are getting by OK with these units.   eBay on a scratch-and-sniff pro-model oldie, a shiny new TopDon, or???   God dang it, I can't stop looking at this Jimmy. I'm ready! I'll Bring The TRailer! It's beautiful.
    • I removed the OE running boards.  It looked so much better.  I wish I took them off a long time ago.     I had to put something back on for my wife.  I wanted Westin Sure Grip Running Boards but they are very pricey, like $600 plus.  I was going to go with the Ionic 41's like I had on the 2019 Silverado but went with Westin Outlaw Drop Steps instead, about $200 cheaper.  They are sturdy and functional but not super crazy about the look, but it works.  
    • It's all a crock of 💩
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...