Jump to content

Issue With CarPlay connecting.

mopac
 Share

Recommended Posts

mopac Enthusiast

mopac

Posted
Posted

I have problems from time to time with CarPlay not connecting.  My 18 Silverado has the bench and center console/armrest and I'm connecting an Apple OEM lightning cable there to my iPhone 6 running iOS 12.  Sometimes I plug the lightning cable into the iPhone and the projection symbol on the infotainment screen doesn't change to the CarPlay symbol and CarPlay isn't active, even though the iPhone indicates it's charging.  

 

I thought at first it might have something to do with the iPhone being locked but it happens when it's unlocked too.  (And I have it set to enable when locked in Settings anyway.)  It seems like it's more apt to do it when I'm at home and plug the iPhone in before my truck is out of range of the home wifi network.  (I've linked my truck to home wifi because I don't pay for the in truck wifi.  But this let's me update apps and things on the MyLink at least while I'm in the driveway.)  But I've had it happen away from the house as well, just not as much as first thing in the morning when I'm leaving.   

 

I've tried rebooting the iPhone.  I've tried restarting the truck - assuming that "reboots" the infotainment system.  This morning I had success pressing on the "Projection" button on the infotainment screen menu repeatedly and after a number of rapid presses it did switch to the CarPlay symbol.    I'm also wondering if sometimes my iPhone 6 processor just isn't going as fast as it needs to should it be doing other things (iPhone 6 running is getting a little long in the tooth although it's responsiveness has improved since the most recent iOS 12 was installed) and that's what is causing the delay.

 

Anybody else experience anything like this with CarPlay?  It's not really clear to me if the culprit is the iPhone or the MyLink.  

Fix29 Enthusiast

Fix29

Posted
Posted

I have the same issue with my GMC using Android auto. I was unsure if it's an issue with my Samsung cable or the truck itself. I don't believe it's the phone itself as it will switch over to android auto mode even if the truck doesn't.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

 

 

17TXLTZ Enthusiast

17TXLTZ

Posted
Posted (edited)

I used to have the same issue, took it to the dealer with no luck.

 

I tried the following and its been working ever since. Go to your home screen on Mylink. Click and hold on any icon as if you're going to move it. Once the option to move come up, move the projection (carplay/android auto) icon onto your favorites at the top of your screen. Once it is there, you should be able to access the carplay from the radio screen. I've ran into the issue that the carplay logo comes up, but i can not access it from the main screen for some strange reason. So i will go into my Nav screen or Radio. Then i click on the carplay favorite icon and it comes right up. And works fine after that.

 

Dealer could never duplicate my concern, as always.

Edited by 17TXLTZ
mopac Enthusiast

mopac

Posted
  • Author
Posted
13 minutes ago, 17TXLTZ said:

...  move the projection (carplay/android auto) icon onto your favorites at the top of your screen. Once it is there, you should be able to access the carplay from the radio screen. I've ran into the issue that the carplay logo comes up, but i can not access it from the main screen for some strange reason. So i will go into my Nav screen or Radio. Then i click on the carplay favorite icon and it comes right up. And works fine after that.

 

Thanks - this is interesting.  I'd already moved the projection icon up into my favorites at the top of the screen while customizing everything a few months ago when I first bought the truck.   When the issue has occurred - doesn't happen every time - hitting that icon would some times give me a message that I needed to connect a device to USB although my iPhone was already connected that way and showed it was charging.  Other times nothing happens and the icon stays the generic projection icon not the CarPlay icon.  This morning I tapped the projection icon in the favorites on the top of the screen a couple times one right after the other and voila - it changed to the CarPlay icon.   Immediately after this I tried to do a couple of things on the Chevy screen and it wasn't responding.  But then it caught up.  And that brings me back to one of my earlier theories that the iPhone 6 even though it is on the most recent iOS 12, only just supports it.  And I'm wondering if sometimes it's CPU is too busy and fails to "handshake" promptly enough with the MyLink and the connection doesn't sync up.

 

I also wonder if the 4K plus songs on my iPhone are part of what it's busy accessing when I first connect.  

 

I'm not sure if they ever issue updates to the infotainment system.  It'd be nice if you could force it to go look for one while you're at home and the truck is connected to your home wi-fi network.  But I don't think there is a way to force it to check.

  • 2 weeks later...
mopac Enthusiast

mopac

Posted
  • Author
Posted

As I try to figure out more of what is happening I have 2 new observations.

 

I took the truck on it's first road trip, which was about 500 miles.  CarPlay would very occasionally just disconnect out of nowhere, as if I'd unplugged the lightning cable from my iPhone.  I was using navigation when this was going on with Apple maps on the infotainment screen.  And suddenly the map would just disappear.  The shortcut icon for projection on the top of the screen would also change from the CarPlay icon back to the generic projection icon.  Typically this would be after about 90 minutes or so I'd guess.  If I unplugged the lightning cable from the iPhone and plugged it back in then CarPlay would reconnect and everything would be back as it was.    The iPhone was still showing it was charging when the disconnect took place and it would be in the 90%+ charge range.

 

If my phone is connected to a wifi network such as my home network or the wifi at work plugging in the iPhone as soon as I get in the truck seems more often than not to result in CarPlay not coming up.  It seems much better to drive down the street or out of the parking lot and once the phone's wifi disconnects then plug in the lightning cable to the iPhone.  That pretty much always results in CarPlay starting up immediately or darn near immediately.

 

Frustrating not being able to figure out if these hiccups are an issue with iOS12 or with the infotainment firmware.

mopac Enthusiast

mopac

Posted
  • Author
Posted
12 minutes ago, Shakeydeal said:

In your settings on your iphone, do you have "Allow Siri when locked" checked?

 

Shakey

Shakey,

 

Yes.  I've got the "Allow Siri when locked" turned on as well as under CarPlay in General section of iPhone settings the "Allow CarPlay While Locked" is also on.  Based on the goofy behavior, I think the "Allow CarPlay While Locked" is the relevant setting rather than Siri when locked.  But in any event, both are set to on.  And it does seem to connect to CarPlay when I plug the lightning cable into the iPhone with it locked so long as the iPhone has already disconnected from the house wifi or the office wifi.  

 

And it's not as if it NEVER connects in the driveway with the iPhone still connected to house wifi.  It's just that it seems if I try to immediately connect the lighting adapter while the truck is still in the driveway and the iPhone is still getting a very strong home wifi signal I'm frequently not getting CarPlay to activate.  Occasionally it does though.  But I pretty much don't have a problem if I don't try to activate CarPlay by plugging in the lightning connector until I'm down the block and my iPhone has lost the signal for my home wifi.  It will start CarPlay right up, whether the iPhone is locked or not.

Shakeydeal Enthusiast

Shakeydeal

Posted
Posted

Well I think  you've figured out your problem. Wifi is interfering with carplay. I bet that would happen with any other truck and any other phone. Or at least the possibility exists.

 

Shakey

  • 5 months later...
CarlosCo New Member

CarlosCo

Posted
Posted

I drive a 2016 Silverado and have been having the same issues as described above. 

I seem to have fixed it now. Basically I disabled the auto android (since I use iPhone of course), and now the phone stays connected all the time. 

I do seem to need a new cable (when I first connect it I have to finagle a bit and the cable does have a small crack in the connector to the phone), but other than that it works perfect

 

used to disconnect several times during my 45 min commute but not anymore over the last week. Hope this helps 

peterlawl84 Enthusiast

peterlawl84

Posted
Posted

Ive had this happen recently in 3 of our GM vehicles (2014 silverado, 2017 acadia, 2018 enclave).  I had to unplug the cable from both the phone and the usb side and plug in a couple of times before it would register apple CarPlay.   different cords in each vehicle as well as different phones (mine and wife's).  not sure why it has done it but it ends up working so I haven't taken it to the dealership to look at further.

  • 2 weeks later...
mopac Enthusiast

mopac

Posted
  • Author
Posted

I think I've figured out the problem I was having with CarPlay not always connecting.  My iPhone 7 is getting long in the tooth even though it is running the (as of the this posting) current 12.3.1 version of iOS.  The processor at times gets bogged down - particularly when I first press the home button to wake it up.  If I then immediately go to Settings app it can take 15-20 seconds before the Settings app is responsive.  My guess is that when I start the truck and immediately plug in the phone, the truck head unit may not quite be booted up and the iPhone isn't immediately responding either.  The delay, particularly on the iPhone side, is probably causing a time out on the head unit and they simply fail to "handshake" correctly.  I've found that if I first wake up the iPhone and unlock it, then wait 15-20 seconds to plug the lightening cable into the iPhone that it virtually always connects.  My strong suspicion is that the issue is mostly on the part of this older iPhone 7 getting bogged down with the latest version of iOS that it's only barely able to run.

JeffH57 New Member

JeffH57

Posted
Posted

I have a 2018 Silverado LTZ.  I cannot get my iphne 7+ to connect to any wired connection using any cord - OEM or otherwise.  I an use bluetooth to make calls, etc, but I want to use the projection.  Everytime I try, it tells me to connect the USB cord.  I can't even charge.  I have to use a household plug in the 110 outlet.

mopac Enthusiast

mopac

Posted
  • Author
Posted
31 minutes ago, JeffH57 said:

I have a 2018 Silverado LTZ.  I cannot get my iphne 7+ to connect to any wired connection using any cord - OEM or otherwise.  I an use bluetooth to make calls, etc, but I want to use the projection.  Everytime I try, it tells me to connect the USB cord.  I can't even charge.  I have to use a household plug in the 110 outlet.

I would take it back to the dealer, as my initial reaction knowing you've tried multiple cords including Apple's, is that the USB plugs are disconnected in the wiring harness.  I'd try something else that lights up in some way via USB (or use a volt meter) to verify there's power at the USB plug(s) you're trying to use.  If there is no power there, then the wiring harness would be the next place to look and I'd leave that to the dealer assuming you're still in warranty.

  • 5 months later...
dterp New Member

dterp

Posted
Posted

disconnect your device from the bluetooth list in the vehicle's settings.  The bluetooth and projection interfere with each other.  You can also turn off your bluetooth when connecting via the cable.

  • 8 months later...
jimbo285 Enthusiast

jimbo285

Posted
Posted

I don't think it's a home WiFi problem. My 2017 Silverado and iPhone 6s do the same thing and I'm not connecting to WiFi. I have unlimited data so WiFi is not needed/not selected on my phone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,947
    Total Members
    8,960
    Most Online
    Sothpaw27
    Newest Member
    Sothpaw27
    Joined

  • Who's Online   2 Members, 0 Anonymous, 442 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • nfisherman
      Software Update

      By nfisherman · Posted

      Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...