Jump to content

OEM accelerator swap- price drop on part!

Darksky

By Darksky
in Modifications & Accessories

Recommended Posts

Darksky Enthusiast

Darksky

Posted
Posted

For this of you considering swapping out your OEM accelerator pedal for the updated part, as outlined in this thread:

 

 

I found a big price drop for the new pedal part # 23362231 on Amazon: $36.02 with free shipping:

https://www.amazon.com/ACDelco-23362231-Original-Equipment-Accelerator/dp/B01MYGWOI1/ref=asc_df_B01MYGWOI1/?tag=hyprod-20&linkCode=df0&hvadid=312050280935&hvpos=1o1&hvnetw=g&hvrand=17873030478691279689&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9029053&hvtargid=pla-566868272816&psc=1&tag=&ref=&adgrpid=61716360643&hvpone=&hvptwo=&hvadid=312050280935&hvpos=1o1&hvnetw=g&hvrand=17873030478691279689&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9029053&hvtargid=pla-566868272816

 

I can’t  argue the validity of the swap, but several guys have done it and stated their belief in it being an improvement. For $36 bucks it’s a lot easier to give it a try... 

Dark

  • 2 weeks later...
808 Enthusiast

808

Posted
Posted

Thanks for posting that!  I paid $40 for mine after seeing this post and its definitely worth it.  My truck was irritating to drive with the pedal delay and how far down I'd have to press the pedal to get going.  I bought a vitesse throttle controller which helped with how far I pressed the accelerator in, but it didnt get rid of the delay.  I'm 95% happy with it now.  100% would be it working like a cable-driven throttle.  I made a video on my experience with it.

 

808 Enthusiast

808

Posted
Posted
25 minutes ago, cbrsilv15 said:

I used a free paint stir stick behind the pedal. ??‍♂️

Would be nice if thats all I had to do.  However, my bracket didnt flex at all originally (I was going to shim it) and after the install, barely flexes still, so thats not my problem.  I might shim it still, but my flex is so minimal that its not the real problem.  

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined

  • Who's Online   0 Members, 0 Anonymous, 213 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • bwiese
      upgrading speakers on 2026 std cab WT...

      By bwiese · Posted

      I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • RyanbabZ71
      RyanbabZ71's 2019 High Country

      By RyanbabZ71 · Posted

      Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Snowcamo
      No high speed fans...

      By Snowcamo · Posted

      Ok, I got the all the codes. What do you all think would be a place to start?
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      3.39 Kroger’s in Montgomery Texas. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...