Jump to content

Chevy 2012 2500 hd cruise not working


Recommended Posts

Posted

My Chevy 2012 2500 hd cruise isn’t working. I hit button on steering wheel and no light comes on steering wheel or dash. I’ve only had truck about 2 months and didn’t notice cruise not working until now. I checked the fuse with manual diagram and it’s fine, so not the problem. I think steering switch just isn’t getting power. No light comes on dash showing cruise is on. Any recommendations on how to systematically troubleshoot this? Thanks 

Posted

Pull up on the brake pedal with your foot and then try the cruise.  It could be a brake pedal position switch, but maybe not since no indicator lights are on in the dash/wheel. 

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Maybe.   Maybe.   I don't want to be the one that needs help and can't get it when I need it. That is a legitimate complaint, and how they respond to those legitimate complaints is a big red flag to me.   I don't care how good the product is their conduct is subpar. Some people are fine supporting that for the sake of getting the product they want. I'm not.   To be fair, I haven't seen or touched their product in person to determine for myself the quality of it. I'm not offering any opinion on that either.
    • So if you do nothing and they act on their threats like death to America or Israel. And possibly a nuclear war. Whoever survives wonders why didn’t they listen? Or we do something like every President has said they can’t get a nuclear weapon. We’re at the 10 yard line and it happens the time is now or never. I think I’m ok with paying a little more for gas for awhile. It’s a shame that we now live in a world that’s so polarized. 
    • 4-5-6 fails due to design.  Not enough clutches and not enough piston to clutch surface area.  Also the backing plate can bow.     I'd say converter is two part.  The design of converter chosen, and factory tuning of it aka slipping it in D (also L6) for AFM purposes, as well as locking it up in 2nd gear, sometimes 1st, also it will partially lock up at light loads.  All because CAFE/fuel economy requirements.  A billet converter on the stock tune might hold up better, but would still be subject to the stock tuning and how its designed to lock or partially lock.     The most baffling part to me, is the 2007-2013 6L80s didn't have the failure rate the 2014-2018 ones do.  I've been where I work for almost 17 years now, and I recall maybe 3 or 4 of the 07-13 transmissions getting pulled for something.  14-18 on the other hand, it was at a minimum one a month being opened up.    If I had to guess, I'd say the tuning for the gen 5 engines/6L80 setup and its fuel economy goals had a good bit to do with it.  Also, it was bankruptcy time during these years, so I'm thinking some cost cutting was done for the launch of the K2XX trucks.  See also now the 10 speed valve body issues (more cost cutting).  They blow out some mesh screen in the spacer plate, undersized check ball, and the feed limit valve was aluminum and wears out prematurely.         I don't think it was the HP jump from the gen 4 to gen 5?  The 6.2 in the 07-13 trucks was good for 380-400hp during its life/states of tune, and the 5.3 did 310-320hp.   
    • All this might be worth it had we actually recovered enriched uranium, a WMD, or an actual nuclear deal with oversight. This is a flub of epic proportion, and they all know it.   $5.10 at a station reporting $4.99 last week. Here we go....
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...