Jump to content

Recommended Posts

Posted

Looking to see if anyone has done any light bars in there 19-20 GMC grill? If so can you give a full breakdown on the specs i.e. Brand, length, 1 or 2 row where did you run the switch to??? Thanks.

Posted (edited)

I had the 20" Baja Designs S8 kit installed:

 

https//www.bajadesigns.com/products/Chevy-Silverado-1500-2019-S8-Grille-Mount-w-20-S8.asp

 

Also did the Baja Designs squadron pro pillar lights:

 

https://www.bajadesigns.com/products/Chevy-Silverado-1500-2019-A-Pillar-Kits.asp

 

I paid to have everything installed, so I can't speak to the installation per se, but everything fits perfect.  I do know that the grill light mounting kit won't work for the LTZ or high country grill, as another user experienced, but worked perfect in my Trail Boss.

 

I bought the switches and plate from https://billetautomotivebuttons.com/ and choose the colored LED buttons that light up when pressed.

 

1.thumb.jpg.c1a8a01aa5d56999dd2dce2b17724545.jpg

 

2.thumb.jpg.f86061dfee65087d8698abac39e520aa.jpg

 

4.thumb.jpg.04775a165d3b077e1ceee2979fdf2bd6.jpg

 

3.thumb.jpg.260412fca007b3bcfb2ddd07b67e7e11.jpg

 

5.thumb.jpg.9b637743ccad8df5f9d3c6a016b71d6d.jpg

 

6.thumb.jpg.8e9a663db8473cefcf872888379f4e40.jpg

Edited by Swiftks
  • Like 2
Posted

I installed the Baja Design 20" bar on Monday. It's a fairly simple install as they send the brackets and the electrical cable from battery to dash switch.

 

You can watch a couple videos on YouTube to learn how to get the grill off. But be warned you don't take the grill all the way off, you tilt the top forward so you can reach in and loosen the 4 bolts that hold the mounts on. They slide into a space at the bottom of the grill, so the grill needs to be on.

 

I took the switches off the wires, taped them to a wire snake and pushed them thru a rubber "nipple" that Chevy puts on each side of the firewall for future wire runs. You need to cut the tip of the nipple off to thread the snake/wire thru. It was pretty tight so I squirted some silicon spray on it, then it went in pretty easy. It comes out in the cab above the gas pedal. 

 

I have finished with the install of the switches, because I don't like the ones Baja Design includes. They don't match anything in the truck. I'll wait to find better switches that look more "stock". 

 

Here's a photo of the hi beams, then the LED bar:

IMG_3985.jpeg

IMG_3987.jpg

  • Like 1
Posted

OP is asking about GMC not Chevy. Although those are killer installs.. 750 for a 20 inch light bar!!?! 

  • Like 1
Posted

All good! Weird it's showing 749 for me looking at the link swiftks posted. Assuming it's the same one? 

Posted (edited)

It's the same. I purchased it at Battle Born Offroad. They had a lower price + a store discount.

 

If you want to purchase thru Baja Design, just call them and they'll pretty much give you a 10% discount.

 

Here's a photo of the box & light, then another photo of the switches I don't like.

IMG_3940.jpg

IMG_3958.jpg

Edited by Trvlngnrs
Posted
10 hours ago, Swiftks said:

I had the 20" Baja Designs S8 kit installed:

 

https//www.bajadesigns.com/products/Chevy-Silverado-1500-2019-S8-Grille-Mount-w-20-S8.asp

 

Also did the Baja Designs squadron pro pillar lights:

 

https://www.bajadesigns.com/products/Chevy-Silverado-1500-2019-A-Pillar-Kits.asp

 

I paid to have everything installed, so I can't speak to the installation per se, but everything fits perfect.  I do know that the grill light mounting kit won't work for the LTZ or high country grill, as another user experienced, but worked perfect in my Trail Boss.

 

I bought the switches and plate from https://billetautomotivebuttons.com/ and choose the colored LED buttons that light up when pressed.

 

1.thumb.jpg.c1a8a01aa5d56999dd2dce2b17724545.jpg

 

2.thumb.jpg.f86061dfee65087d8698abac39e520aa.jpg

 

4.thumb.jpg.04775a165d3b077e1ceee2979fdf2bd6.jpg

 

3.thumb.jpg.260412fca007b3bcfb2ddd07b67e7e11.jpg

 

5.thumb.jpg.9b637743ccad8df5f9d3c6a016b71d6d.jpg

 

6.thumb.jpg.8e9a663db8473cefcf872888379f4e40.jpg

I like your switches and location, very clean..thank you.

  • Like 1
Posted

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

F3F6E897-0B74-4E45-946F-8A76E6176BA9.jpeg

Posted

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

E9548719-AF1E-4510-AE82-2BE69AA0687D.jpeg

  • Like 1
Posted
3 hours ago, VGZPRT said:

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

E9548719-AF1E-4510-AE82-2BE69AA0687D.jpeg

how did you manage to mount it?

  • Like 1
  • 8 months later...
Posted
On 1/30/2020 at 10:52 AM, VGZPRT said:

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

E9548719-AF1E-4510-AE82-2BE69AA0687D.jpeg

I’m also curious on how and what this was mounted too 

  • 1 year later...
Posted
On 1/30/2020 at 9:50 AM, VGZPRT said:

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

F3F6E897-0B74-4E45-946F-8A76E6176BA9.jpeg

Hello all, new to the site so if this has been answered I apologize.  I purchased a 2021 AT4 1500 a few months back and have been looking at LED lights for the grill and wanted a 30" bar, love this install!  Do you have any pix of the mounting and brackets you picked up from Depot?  Of all things I am a service manager for a Ford store but we also own a GMC/Chevy store, figured I'd go to the dark side for a while, love the truck, just needs more lights.  When I had my F-250's it was easy but not a lot of room to play here.  Thanks in advance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Based on what I can tell, yes.   As for updating it, its a mixed bag.  Updates do fix a lot of issues, but occasionally can create some oddities.  They do more good than harm though overall.     Here's what the most current one does and a  V171 Improvements Important: Improvements will vary by model, build configuration, system, and sales region. Not all vehicles have all features. OnStar and Wi-Fi may not work after remote start CarPlay may not automatically reconnect Part of the Driver Attention messaging screen may be in English even though the language is set to something else XM may not work After a dead 12V the radio may set to Arabic at each startup Bluetooth contacts might not be able to sync with the vehicle During an OTA the 12V battery may drain Customer might see a screen telling them to return to the dealer After changing the Wi-Fi SSID or password a device may not disconnect If a device is connected on the 2.4Ghz band, nothing will connect to the 5Ghz one, which could show as slow Wi-Fi speeds Customers might have noticed Wi-Fi dropping in certain areas and reconnecting later Customer might see the top of the screen blinking during Android Auto Android Auto may not connect CarPlay audio might momentarily cut out The "Add Phone" button may be grayed out The radio may not start up   V167 Most Notable Improvements:   Outside Air Temperature is incorrect. -You may see a popup message for Engine Shift. (Corvette Only) After changing the exhaust sound they get a popup that "mode change not applied", even though it was. -When changing volume, the volume bar is for Traffic instead of Audio. -(Corvette Only) Improvements to the placement of buttons and text. -If the customer receives the message "Apple CarPlay Could not connect", the cursor might move in the opposite direction than expected when using the control knob. -Android Auto automatically starts playing their music, even though they have turned that off in settings. -Intermittently they have a red OnStar LED with no OnStar function and/or no audio. -The minimum length of the Wi-Fi password was increased to 12 characters. -The popup message "Driver Attention Check, check your mirrors or Super Cruise will shut down" may not have come up on the display when it should have. -Startup animation added for 20th anniversary of the V-Series on Cadillacs. -The Navigation app received location improvements when going under long underpasses. -In the Navigation app there are filters for charging points that the vehicle cannot use.   V164 Most Notable Improvements Most notable improvements contained in this release may include: Apps Intermittently, an “SD Card Removed” message will pop up in the Navigation app. While in the audio app, the radio may stop working. Trailer Tire Pressure sensors may not be learned in the Trailer app. Not being able to return to the home screen while in the Camera app. After an ignition cycle, the radio might go to a black screen or stop working if using Sirius XM. Spotify icon truncated on Audio app.   SXM When changing power modes with the ignition switch, the HVAC pop up might appear. During startup, the radio will show the brand splash screen then go blank. Receiving a confirmation pop-up when changing drive modes. A “Return to Dealer” message may appear on the radio screen. SuperCruise setting toggle may not work. System After an ignition cycle, the radio might go black or stop working if using Sirius XM (SXM). Settings When performing a factory reset, the radio may stop working. After performing a factory reset, the radio may stop working when trying to switch users. When trying to go into the Language section quickly after startup, the radio may stop working. Projection Wireless CarPlay cannot be connected after unpairing another wireless Android Auto device. When the Android Auto screen comes up to connect wirelessly, the screen may freeze if the Cancel button is pressed. Removed the Apple CarPlay Cannot Connect screen when a device fails to pair during the autoconnect process. CarPlay information may not show up in the audio app. Near Field Communications (NFC) chime may be heard when NFC does not work. The Cannot Connect screen does not pop up after the first connection on wireless CarPlay fails. Apple CarPlay is now functional in Guam. Over the Air (OTA) When a software update is cancelled, the downloading logo may still be displayed. Energy When using the Energy app, the radio may stop working. When plugging in the vehicle, the display might show “Now” instead of “Charging Upon Plug In.” Instrument Cluster Voice recognition can be started while on an OnStar or phone call. When downloading contacts, there is a progress bar and circles on the Recents page of the cluster. The temperature on the cluster and the display may be different. After receiving and ending a call on the secondary paired phone, the cluster may get stuck on the phone menu. Bluetooth Intermittent Bluetooth connection loss.
    • Looking for help troubleshooting a metallic like front end rattle. Figured I’d see if anyone had thoughts before I schedule an appointment with the dealer.   The rattle is fairly loud and occurs primarily when the front driver side wheel hits a bump, even fairly minor road seams. Sometimes does it when the passenger hits a bump but I don’t believe when the rear hits. Rattle still occurs when foot is pressing brake peddle so I think that rules out the caliper rattle I’ve read about. I’ve also checked the running boards and they are tight.   Most noticeable at slow speeds.    Any insight is appreciated. 
    • We try to make cruise the coast. It’s where our favorite casino is. I only want to spectate. Never took a car. Always had one to take. I belonged to a club once. Even when I used to drag raced. It was during test and tune. Probably because I’m not a night owl, party person. 
    • We had a pretty big cars and coffee in Indy this past weekend.  Pretty much anything and everything was there.  
    • Good looking Olds, and TRX!   I haven't been into car shows either. I'm probably not a convert but I did push myself this year to attend a few select events to challenge some assumptions and try to experience car-based social clubs in a different way. I joined up with the local Hagerty group for some cars/coffee events, group drives. A month ago I showed my '94 Camaro I rescued last fall at Radwood. Had a good time, but, there was some sitting around with the car and that's the part of shows I don't enjoy as much. I prefer to be a spectator, walk the show, grab a burger, go home.   Radwood was the only era-limited event, but where it had strict model year limitations, it made it up in variety. Having Jason Camissa there was also a hoot.   Where I see old 50's car shows, doo-wop and winga dinga music stuff fading out, same with "only" vintage muscle clubs, it seems to be the activity-based clubs/events which are gaining strong popularity. Places where all cars and interests come together.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...