HELP codes P10E4-00 P0700-00 P2535-00 after a car Detail

Markatmjm · June 7, 2020

Need help I had my 2017 GMC Sierra 1500 deatailed yesterday and when I pick it up I have these codes:

P10E4-00 P0700-00 P2535-00

most likely water got in so where as they wash the car inside and out . But also I need to mention I have replaced both Headlamps just before I went to the car was detail shop. They were replaced because they were damaged ( lens were cracked due to a small fender bender) I never had any check engine light while I was using the truck with cracked lens on both headlamps.
Do I need to program the new headlamps ?
if any one can point me in what can I check first I have a scanner and tools.

Thank you

silveradosid · June 7, 2020

here is a tsb that covers 2 of your codes

MC-10154263-9999.pdf

Markatmjm · June 7, 2020

2 hours ago, silveradosid said:

here is a tsb that covers 2 of your codes

MC-10154263-9999.pdf 70.96 kB · 8 downloads

Thank you for that pointer.

i have check it and it looks good in there.

it appears that main culprit here is code P2535-00

i might be wrong tho

Markatmjm · June 7, 2020

Any information on how to go about testing for P2535?

Markatmjm · June 7, 2020

3 hours ago, silveradosid said:

here is a tsb that covers 2 of your codes

MC-10154263-9999.pdf 70.96 kB · 8 downloads

Is there a full diagram anywhere for 2017 gmc 1500 elevation edition? I need to check if there is any voltage on the fuses mentioned in the bulletin

silveradosid · June 8, 2020

look at the inside cover of the of the fuse block cover it shows where the fuses in the pdf are. the other code p2535 is a little confusing, but i will try and research it more. does your truck start and run fine?

Markatmjm · June 8, 2020

1 hour ago, silveradosid said:

look at the inside cover of the of the fuse block cover it shows where the fuses in the pdf are. the other code p2535 is a little confusing, but i will try and research it more. does your truck start and run fine?

I want to thank you for you help!!!

i did take out the other headlight ( passenger side it is harder to get to the plug)

And Sure Enough There was water in the Plug!

blow it out put some W-40 in and blow it out .

Works as it Shoudl.

For any one in the future coming across this thread If you have 2 of the codes Silveradosid ( screen name member ) mentioned above ....

1. Check your headlights plugs First! Blow air through plugs put electric grease in , these plugs are not made very well to keep condensation away!

FYI I have 3 more codes beside the 2 in the bulletin , All clearly related to the Water In the plugs.

i hope this helps some one in the future.

Thank you

Mark