Jump to content

Muffler swap, flapper+resonator screen delete

Chips
 Share

Recommended Posts

Chips Enthusiast

Chips

Posted
Posted

Dropped my truck off this morning to get the resonator screens removed. Cutting the section out containing the three screens on each side, welding in 3” pipe . Its roughly a 12” section on each side.

Flapper was removed with stock muffler and a black widow put in place. Just picked it up. It sounds way better with those screens removed , and I also feel like the truck has more bottom end with screens removed .

 

 

Driving at 40km/h , 60km/h and 80km/h. No drone whatsoever. Its shockingly silent in the cab at cruising speeds. 

 

starting thread to upload some videos after work.  

beefin06 Enthusiast

beefin06

Posted
Posted
22 hours ago, Chips said:

Dropped my truck off this morning to get the resonator screens removed. Cutting the section out containing the three screens on each side, welding in 3” pipe . Its roughly a 12” section on each side.

Flapper was removed with stock muffler and a black widow put in place. Just picked it up. It sounds way better with those screens removed , and I also feel like the truck has more bottom end with screens removed .

 

 

Driving at 40km/h , 60km/h and 80km/h. No drone whatsoever. Its shockingly silent in the cab at cruising speeds. 

 

starting thread to upload some videos after work.  

Really, no drone at all? That's awesome!

 

Do you have a link to the black widow muffler you purchased?

  • Like 1
AEmedic Enthusiast

AEmedic

Posted
Posted

I am leaning towards a similar change to my 6.2 HC.  Is there any down side of removing the valves? Codes?  I'm not sure what muffler I will choose...I am a fan of Magnaflow.  Are there any inherent flaws to the rest of the OE cat-back system other than the screen, the valves and the quiet muffler? 

Chips Enthusiast

Chips

Posted
  • Author
Posted
39 minutes ago, AEmedic said:

I am leaning towards a similar change to my 6.2 HC.  Is there any down side of removing the valves? Codes?  I'm not sure what muffler I will choose...I am a fan of Magnaflow.  Are there any inherent flaws to the rest of the OE cat-back system other than the screen, the valves and the quiet muffler? 

 

No down side, the flapper should be removed when changing the muffler. The muffler is big, heavy and restrictive . You wont get an aggressive tone with the screens in place , if you have the resonator screens if not and you have an actual resonator then the same thing, it should be removed unless you are after a milder tone.

 

 

 

 

All these components are after any sensors so no issues with codes or anything.

 

Ill post some pictures of how she looks.

 

 

 

 

 

AEmedic Enthusiast

AEmedic

Posted
Posted
20 hours ago, Chips said:

No down side, the flapper should be removed when changing the muffler. The muffler is big, heavy and restrictive . You wont get an aggressive tone with the screens in place , if you have the resonator screens if not and you have an actual resonator then the same thing, it should be removed unless you are after a milder tone.

 

 

 

 

All these components are after any sensors so no issues with codes or anything.

 

Ill post some pictures of how she looks.

 

 

 

 

 

Is yours a 6.2?  Is yours 3" pipe throughout?

  • 2 weeks later...
EricTheRed Enthusiast

EricTheRed

Posted
Posted
On 7/30/2020 at 4:59 PM, AEmedic said:

Is yours a 6.2?  Is yours 3" pipe throughout?

I think he has a 5.3L because he only mentions one flapper valve and the resonating screens. 

AEmedic Enthusiast

AEmedic

Posted
Posted
1 hour ago, EricTheRed said:

I think he has a 5.3L because he only mentions one flapper valve and the resonating screens. 

Thank you.  I did determine what the 6.2L has.  It is 3.5” that necks down to 3” at the flappers at the inlet and outlet of the muffler then back to 3.5” till it reaches the Y at the axle.

Spyderwebb Enthusiast

Spyderwebb

Posted
Posted

Very tempted as well, I've found an AFE for $110 (out of stock) at American Trucks) and a Magnaflow for $178 (in stock), debating on if the Magnaflow is the better option, but it's just a straight pipe????  Otherwise, just worried about the sound with the variable cylinder deactivation !

Chips Enthusiast

Chips

Posted
  • Author
Posted
3 hours ago, Spyderwebb said:

Very tempted as well, I've found an AFE for $110 (out of stock) at American Trucks) and a Magnaflow for $178 (in stock), debating on if the Magnaflow is the better option, but it's just a straight pipe????  Otherwise, just worried about the sound with the variable cylinder deactivation !

So it depend what you are looking for . I can tell you the 2020 trucks are way way quieter than the 2018 . Im not quite sure what they did .

 

For myself I probably should have straight piped it. My Black Widow setup is nice and fairly loud. But its still not near my 2018 with the same exact setup.

 

im convinced you just cant make them loud , maybe a straight pipe?

 

With the resonance pipes removed and the flapper removed , Black Widow Race Venom it sounds good, not loud at all unless cold start, in cab noise is noticeable at 100 km/h to 115 km/h after 115 it goes away. Under that or over that range its quiet in cab.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined

  • Who's Online   0 Members, 0 Anonymous, 642 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • lowrider
      Range RA007 DFM Module

      By lowrider · Posted

      I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Tyler Gibbs
      2022 2500HD with a new RSI SmartCap

      By Tyler Gibbs · Posted

      Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • fm2176
      It's Been a Long Time...

      By fm2176 · Posted

      My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...