Help with choosing correct offset

[doozer78]

2020 Denali 2500. Installing a 3" suspension lift. They suggest an offset anywhere from

0 to +20

I want the wheels to just slightly be out past the fenders. Wouldn't I need a negative offset for this? Was thinking maybe a -6?

Any help or suggestions is appreciated. Want to be sure I get this right. Thanks

 

Sent from my SM-A705U using Tapatalk

 

 

[Basketcase]

I have +18 on 18x9 wheels and the tires sit just proud of the fenders roughly 1/2-1". 

 

Ideally id like to go to a +6 or so to be a tad more aggressive.

[JB23]

On 8/30/2020 at 9:58 AM, doozer78 said:

 

2020 Denali 2500. Installing a 3" suspension lift. They suggest an offset anywhere from

0 to +20

I want the wheels to just slightly be out past the fenders. Wouldn't I need a negative offset for this? Was thinking maybe a -6?

Any help or suggestions is appreciated. Want to be sure I get this right. Thanks

 

Sent from my SM-A705U using Tapatalk

 

 

 

I would be interested in what you find out as well, doozer. Most post and suggestions I have seen have said stick with a 0 to 18 offset on these trucks even with a leveling kit. 

Edited September 22, 2020 by JB23

[doozer78]

I would be interested in what you find out as well, doozer. Most post and suggestions I have seen have said stick with a 0 to 18 offset on these trucks even with a leveling kit. 

I ended up going with a -19 just waiting to get me 3" lift on now. Cant wait

Sent from my SM-A705U using Tapatalk

[Schmidty]

Have you guys used this website? Good for calculating the numbers and getting a very rough look at the difference in tire/wheel position versus stock!

 

This link is my comparison of the stock wheel/tire and the new set I'm looking at 22x10 -18 and 35x12.50r22

 

https://www.willtheyfit.com/index.php?width=275&aspect=65&diameter=20&wheelwidth=8.5&offset=47&width2=318&aspect2=52&wheel_size=22&wheel_width=10&offset2=-18

 

[gSwift]

Negative offsets move the wheel out towards the fender more.

 

 

[JB23]

15 hours ago, doozer78 said:

I ended up going with a -19 just waiting to get me 3" lift on now. Cant wait

Sent from my SM-A705U using Tapatalk
 

Post pictures after you get them installed!

[JB23]

On 9/22/2020 at 4:25 AM, doozer78 said:

I ended up going with a -19 just waiting to get me 3" lift on now. Cant wait

Sent from my SM-A705U using Tapatalk
 

Hey Doozer- did you have a chance to get your wheels and tires installed on your rig yet?

[doozer78]

Hey Doozer- did you have a chance to get your wheels and tires installed on your rig yet?

No waiting to get my lift on. Have been debating to do it myself or pay a shop. I've been super busy these last 4 weeks so haven't had the time but in dying to get it done

Sent from my SM-A705U using Tapatalk