Jump to content

Bad Ball Joint?

mistermcgoo

By mistermcgoo
in Troubleshooting & Recalls

 Share

Recommended Posts

mistermcgoo Enthusiast

mistermcgoo

Posted
Posted

I have a 2018 Silverado with a 2.5” RC level kit. Occasionally/sporadically when making sharp, slow speed turns (usually when parking) I’ll notice a faint “clunk” coming from the front end. The truck itself has 33k miles (about 6k w/the level kit). 
 

Could this be indicative of a bad ball joint? If so, is it normal for a 2.5” front level to wear a ball joint out that quickly? Thanks

MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted
12 hours ago, mistermcgoo said:

I have a 2018 Silverado with a 2.5” RC level kit. Occasionally/sporadically when making sharp, slow speed turns (usually when parking) I’ll notice a faint “clunk” coming from the front end. The truck itself has 33k miles (about 6k w/the level kit). 
 

Could this be indicative of a bad ball joint? If so, is it normal for a 2.5” front level to wear a ball joint out that quickly? Thanks

Did you keep the stock UCAs?
If so, your upper control arm ball joint(s) may have expired.
Any level installation should have a UCA replacement for the height of level over 2"

mistermcgoo Enthusiast

mistermcgoo

Posted
  • Author
Posted
2 minutes ago, MikeBMW said:

Did you keep the stock UCAs?
If so, your upper control arm ball joint(s) may have expired.
Any level installation should have a UCA replacement for the height of level over 2"

Yes, they are the stock UCA’s. I know I took a gamble keeping them, now I may be paying the price. I’ve heard replacing upper ball joints isn’t cheap, so I’m fearing that price may be high..

MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted (edited)
9 minutes ago, mistermcgoo said:

Yes, they are the stock UCA’s. I know I took a gamble keeping them, now I may be paying the price. I’ve heard replacing upper ball joints isn’t cheap, so I’m fearing that price may be high..

It's about $275 for the ones I bought - Motofab UCAs for a three inch Motofab level kit.
I also got the Motofab 1" rear block lift and a 1.5" rear spring lift.
My installer charged $335 for the entire install so, I would think just a UCA chang-out would be the price of the UCAs and, maybe, $150 or so?
EDIT: My installer mentioned he would never install a level without proper new UCAs.
EDIT 2" https://motofablifts.com/i-30558324-17-18-chevy-gmc-silverado-sierra-1500-upper-control-arms.html

" Corrects the ball joint angle for 2.5"-3" front leveling kits "

Price is actually about $290, sorry.

Edited by MikeBMW
  • Like 1
mistermcgoo Enthusiast

mistermcgoo

Posted
  • Author
Posted
3 minutes ago, MikeBMW said:

It's about $275 for the ones I bought - Motofab UCAs for a three inch Motofab level kit.
I also got the Motofab 1" rear block lift and a 1.5" rear spring lift.
My installer charged $335 for the entire install so, I would think just a UCA chang-out would be the price of the UCAs and, maybe, $150 or so?
EDIT: My installer mentioned he would never install a level without proper new UCAs.

 
Good to know. If it does end up being a bad upper ball joint, I’ll probably just swap out the stock UCA’s for aftermarket ones. 
 

Like I said, the clunk is really sporadic and only happens once and a while. Is there anything else that could possibly be causing it? I haven’t noticed any uneven tire wear (yet) etc.. 

 

  • Like 1
MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted
1 minute ago, mistermcgoo said:

 
Good to know. If it does end up being a bad upper ball joint, I’ll probably just swap out the stock UCA’s for aftermarket ones. 
 

Like I said, the clunk is really sporadic and only happens once and a while. Is there anything else that could possibly be causing it? I haven’t noticed any uneven tire wear (yet) etc.. 

 

Not that I'm aware of in my experience.
As long as your sway bar links and steering links are good, it usually comes down to the UCAs.
See my edits above. :)

mistermcgoo Enthusiast

mistermcgoo

Posted
  • Author
Posted
Just now, MikeBMW said:

Not that I'm aware of in my experience.
As long as your sway bar links and steering links are good, it usually comes down to the UCAs.
See my edits above. :)

Thanks for the links! I have replica 20” GMC Honeycomb wheels, judging by Motofab’s website I’ll need wheel spacers? Aren’t wheel spacers usually frowned upon? Or maybe I’m just regurgitating something I read somewhere..

  • Like 1
MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted (edited)
4 minutes ago, mistermcgoo said:

Thanks for the links! I have replica 20” GMC Honeycomb wheels, judging by Motofab’s website I’ll need wheel spacers? Aren’t wheel spacers usually frowned upon? Or maybe I’m just regurgitating something I read somewhere..

I have 18" wheels and 35s, virtually no rubbing - didn't know the recommendation for spacers.
I'd try to stay as far away from wheel spacers as I could!
EDIT, again: they only call for 1/4" so that seems reasonable.

Edited by MikeBMW
  • Like 1
MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted
5 hours ago, 2017_LTZ said:

I took that gamble and lost..... Now I'm looking at the DirtKing UCA or BDS UCA....

 

20210330-110031.thumb.jpg.d54d5333e21eedfdcf83af037c59b087.jpg

I'm pretty happy with the Motofab UCAs.
Ruining a 3" Motofab level (with 1.5" Zone body lift but that doesn't affect the geometry) and, really, I don't notice any rubbing on 35x12.5x18s.

  • Like 1
3tspapat Enthusiast

3tspapat

Posted
Posted

Your ball joint pressed itself out! Totally legitimate reason for upgrading now!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined

  • Who's Online   1 Member, 0 Anonymous, 252 Guests (See full list)

  • Latest Articles

  • Posts

    • bwiese
      upgrading speakers on 2026 std cab WT...

      By bwiese · Posted

      I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • RyanbabZ71
      RyanbabZ71's 2019 High Country

      By RyanbabZ71 · Posted

      Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Snowcamo
      No high speed fans...

      By Snowcamo · Posted

      Ok, I got the all the codes. What do you all think would be a place to start?
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      3.39 Kroger’s in Montgomery Texas. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...