2014 Silverado 1500 LT 4X4 4.6L getting code P06DA

[Steven Kibler]

Hello I am getting this code P06DA (Engine oil pressure control circuit open) I have replaced the Oil pressure sensor #12637356. Removed code and after less than a mile check engine light returned with same code. What's next?

[Doug_Scott]

I would suggest putting the wallet away and start looking for the break in the "Engine oil pressure control circuit".  Typically engine sensors have 3 wires, one ground, one power and one signal.  Follow the wires back from the sensor and check every connection they go through.  Most likely a bad/dirty connection at one of the harness plugs.

[Steven Kibler]

8 minutes ago, Doug_Scott said:

I would suggest putting the wallet away and start looking for the break in the "Engine oil pressure control circuit".  Typically engine sensors have 3 wires, one ground, one power and one signal.  Follow the wires back from the sensor and check every connection they go through.  Most likely a bad/dirty connection at one of the harness plugs.

 

[Steven Kibler]

Thanks, I'll give that a try. I'll post back the results.

[Jayselectricco]

Did you ever get this issue resolved?