Jump to content

All Things Needed for Towing

Byrds8
 Share

Recommended Posts

Byrds8 Enthusiast

Byrds8

Posted
Posted

This is the first truck I have ever owned. Even though I am not planning to tow in the near future, I would like to go ahead and have the things I may need so its not something I have to go get when the need arises. What all would I need to have to tow properly and safely? Wiring harnesses, balls etc. My truck is at stock height at this time. I tried looking through the manual but I cant say it was a great help to determine the best course of action. So with that said, I defer to the experts here. Any advise is greatly appreciated. Thank you.

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Byrds8
Byrds8

I have read that part for sure. I also read that even though my truck says it can do 9400 other people do not recommend more than 6K for a smooth not crazy ride. I believe the placard on the truck say

Byrds8
Byrds8

I have towed before just not for a while. As a teen, I've backed up and towed the boat. In the military we have hauled big generators and such around even had training days where we went into the wood

JimCost2014
JimCost2014

That is a pretty open ended question.   First, what model, and then what options does your truck have? Does it have the factory brake controller?   What do you plan on towing, smal

Posted Images

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
39 minutes ago, Byrds8 said:

This is the first truck I have ever owned. Even though I am not planning to tow in the near future, I would like to go ahead and have the things I may need so its not something I have to go get when the need arises. What all would I need to have to tow properly and safely? Wiring harnesses, balls etc. My truck is at stock height at this time. I tried looking through the manual but I cant say it was a great help to determine the best course of action. So with that said, I defer to the experts here. Any advise is greatly appreciated. Thank you.

That is a pretty open ended question.

 

First, what model, and then what options does your truck have? Does it have the factory brake controller?

 

What do you plan on towing, small trailer, large trailer/boat, and have you ever towed anything before?

 

Ball will be determined by tongue on trailer, along with wiring harness, which your truck should accept both 4 pin (non brake), and a 7 pin (with trailer brakes) if it came with the factory towing set up.

 

So, I have over the years bought different size balls and drawbars to have just in case the need arises. Hitch pins are cheap, Bolt Industries makes pad locks, and the hitch pins that match the key to your truck, so you need one key.

 

I would figure out what you will be doing, then give yourself enough time to get your supplies. 

  • Thanks 1
Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

I have a 2016 LT. It doesn't have the controller to the left of the steering wheel if that is what your are asking.

 

There is nothing in particular I have planned on towing. Granted I do understand there are roughly 3 standard ball sizes that would go with the trailer you pull. This was more to get what I could in case the need arises. More like I have the money now and would like to get at least most of it.

 

As for wiring, there are two items near the license plate. I know one is for breaking the trailer from trying to read the manual but not sure what the second one is for.

 

I havent pulled anything in a long time. When I was a teen, we had a Glastron boat I have towed up to the lake and I have towed my own car on back of a U-Haul. Beside that nothing of a constant nature.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
51 minutes ago, Byrds8 said:

I have a 2016 LT. It doesn't have the controller to the left of the steering wheel if that is what your are asking.

 

There is nothing in particular I have planned on towing. Granted I do understand there are roughly 3 standard ball sizes that would go with the trailer you pull. This was more to get what I could in case the need arises. More like I have the money now and would like to get at least most of it.

 

As for wiring, there are two items near the license plate. I know one is for breaking the trailer from trying to read the manual but not sure what the second one is for.

 

I havent pulled anything in a long time. When I was a teen, we had a Glastron boat I have towed up to the lake and I have towed my own car on back of a U-Haul. Beside that nothing of a constant nature.

You should have something similar in your bumper that looks like this. It has two "doors", one for the four pin connecter, which would be your small (U-Haul) trailer without brakes, and the 7 pin which will work with trailers that have brakes on them.

 

As far as the other stuff, just buy a 1 7/8", 2", and a 2 5/16" balls, and drawbars for each, or a drawbar that has all 3 sizes on it.

Get a good heavy duty tool bag under you back seat, and put things in it as you go along.

I have hitch pins, drawbar and ball, locks, tow straps, gloves, and so on in mine in case I need to tow something for myself, or a friend.

 

See the source image

Edited by JimCost2014
  • Thanks 1
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

Without the factory controller, for a trailer with brakes, you would need to add an aftermarket unit if you did decide to pull a larger trailer with a brake system set up on it.

 

Pretty easy addition.

Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

So I do have that to the left of the license plate. There is something else to the right of it.

 

For the drawbar, how much of a drop should I look for or just a straight one? I did see some with all three balls and it did cross my mind to get it and be done.

 

So, since I do not have a controller in the cab, the 7pin does me no good because my truck will not break the trailer?

 

Already on the straps. I had to buy two for when my wife purchased some outdoor chairs from Wal-Mart lol. Need more though. I am thinking of getting tie downs for the bed also. Too bad I didnt have those when they put in the liner.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
35 minutes ago, Byrds8 said:

So I do have that to the left of the license plate. There is something else to the right of it.

 

For the drawbar, how much of a drop should I look for or just a straight one? I did see some with all three balls and it did cross my mind to get it and be done.

 

So, since I do not have a controller in the cab, the 7pin does me no good because my truck will not break the trailer?

 

Already on the straps. I had to buy two for when my wife purchased some outdoor chairs from Wal-Mart lol. Need more though. I am thinking of getting tie downs for the bed also. Too bad I didnt have those when they put in the liner.

The object to the right is for access to you spare tire, need your key to take the lock out if it is still there.

 

Drop depends all on the the trailer tongue, I went with a 2" drop just to be safe with my truck at factory height. Works with most trailer I have pulled.

 

You can still pull a 7 pin trailer, you just will not be able to control the brakes on it, but the lights will still work.

 

I use these in my bed, like them a lot.

 

 

 

  • Thanks 1
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
31 minutes ago, Byrds8 said:

As for braking, what do you think about the below?

 

https://accessories.chevrolet.com/product/spectrum™-brake-controller-module-by-curt™-associated-accessories-19418030?vin=3GCPCRECXGG321983&categoryId=98099

 

 

Yea, I like that one.

 

Check out MikeBMW's profile, he has a blue one installed at his local dealership.

He some good pictures so you can see how it looks. 

Maybe even PM him for more info if he does not chime in.

Edited by JimCost2014
Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

I really appreciate all the advise and help. I have owned six Camaros in my day and finally decided I needed a truck. Looking back, wish I would have found a good deal on one with a Duramax engine but its all good. I love my truck for sure. Just purchased some new wheels for her too. Should be in in a week.

  • Like 1
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
32 minutes ago, Byrds8 said:

I really appreciate all the advise and help. I have owned six Camaros in my day and finally decided I needed a truck. Looking back, wish I would have found a good deal on one with a Duramax engine but its all good. I love my truck for sure. Just purchased some new wheels for her too. Should be in in a week.

You are very welcome.

 

Post some pictures of the mods and the new wheels.

Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

New wheels will not be here til next week. Havent modded the truck too much yet other than debadging, black bow ties, catch can, tint, modular intake tube and drop in filter.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
2 minutes ago, Byrds8 said:

Havent modded the truck too much yet other than debadging, black bow ties, catch can, tint, modular intake tube and drop in filter.

Think to most, that is a few things😂🤣

  • Haha 1
Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

Forgot catback lol. Well my last ride was a 2013 Camaro SS. It had the badging changed out to the old script, coil overs and lowered, extremely light weight wheels, full exhaust to include LTs, CAI, Tuned, two 10" subs, sub amp, heritage grill, catch can, tint. Thats what I can think of atm lol.

IMG_1911.jpeg

  • Like 1
Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted (edited)

Here is a picture of the front of the truck though. I will post images of the new wheels after she gets them on. They only weight 28 lbs also :D. Dropping about 6lbs per of unsprung weight. Gotta call that a win. Forgot, that antenna is no longer there either. I got a much shorter one.

IMG_1979.jpeg

Edited by Byrds8
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...