Jump to content

Temp gauge

Tockytop75

By Tockytop75
in Troubleshooting & Recalls

 Share

Recommended Posts

Tockytop75 New Member

Tockytop75

Posted
Posted

Hey guys I have a 2014 Silverado and recently the fan has been stuck on to where I have to un hook battery to get it turned off, and when this happens the temp gauge does not work. Any  ideas?

Eva New Member

Eva

Posted
Posted
52 minutes ago, Tockytop75 said:

Hey guys I have a 2014 Silverado and recently the fan has been stuck on to where I have to un hook battery to get it turned off, and when this happens the temp gauge does not work. Any  ideas?

 

Eva New Member

Eva

Posted
Posted

I'm having the same problem with my 2015. The fan turns off after about 3 minutes of the truck being turned off. It only does it when I use the heater.

MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted
1 hour ago, CamGTP said:

Could be a faulty coolant temp sensor.

Yep, a friend at work, with 2014, just had to get his coolant temp sensor changed out yesterday.
Same thing, fan stayed on and no reading on the dash.

josney Enthusiast

josney

Posted
Posted

I started with swapping the thermostat in my 2014 because of the same issue. Didn't solve the issue, so after swapping the temp sensor...presto. Problem solved

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,962
    Total Members
    8,960
    Most Online
    contrabombarde
    Newest Member
    contrabombarde
    Joined

  • Who's Online   3 Members, 0 Anonymous, 842 Guests (See full list)

  • Latest Articles

  • Posts

    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      From where I'm sitting this sounds like a compatibility problem. I'm assuming the 2007 was a 900-series truck, and not an 800-series (they were sold side-by-side in dealerships that model year), since it starts and runs.   This is why I HATE post-2006 vehicles. Everything becomes a huge problem when you try to keep the thing running for longer than the manufacturer has designed it to.    I can't remember when Global-A architecture started - either '10 or '11. For your sake, you had better hope it's '11, or you're going to be spending some BIG money to correct this cluster-eff. That's something you need to find out before doing anything else. You may have several computers bricked ... but the fact that it runs tells me you MIGHT be ok here.     EDIT: Just did a quick refresher. You're screwed. This is Global-A. The 2 systems are NOT compatible in the slightest. Once you get the correct engine in there that IS compatible, you're going to need to see how many computers are locked. Absolute NIGHTMARE to straighten out, too. Your buddy might be better off cutting his losses and finding something else.   Welcome to post-2006 vehicle electronics. This is why I quit the industry, and drive nothing built after 1994. This stuff takes all the fun out of wrenching!  
    • bwiese
      Show Us Your 2019 & Up T1 Pictures !

      By bwiese · Posted

      Recently acquired new 2026 Silv. 1500 WT  - L3B + 4WD,  std cab + std bed, in (duh!) Sierra White. Upgrades: replaced 'steelies' w/  Vision "Flow" black alloys,  17x8.5"; HDX nerf bar w/steps (black powdercoat); Weatherguard large/deep alloy saddle toolbox; Michelin fitted bedmat (sale, perfect fit) Weathertech door sill guards TBD: rear wheebox liners 4x black fender arch trim - searching for best  (Putco: chrome only; not looking for flares either!) -Bill    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      True, hard to say what differences there may or may not be between Chev and GM as well as a production year or mid year part change either.    I just found it odd that under the Sierra choice on the Autel that many of the last few years of production year did not include the choice of changing the tire pressure but if that is an Autel thing or a GM thing as to why the choices were not there. Knowing what tpms sensors are on the truck should give some guidance into which choices on the tool even make sense to try as I wouldn't give up just yet with the tool but I guess he will see what if anything he comes up with if he finds out a bit more info and tries a few more things on the Autel. 
    • davester
      Needing this part.

      By davester · Posted

      I'm sure if you went to a junkyard where you go in and pull the part off the truck yourself, not a used part place where they do it for you, you can get that part on it's own.  Depending on if and what else you would be buying, and time of day, they might even just skip over adding it as a item to the bill.
    • davester
      PF63 Oil Filters Going Away?

      By davester · Posted

      No, we trade them like pokeman cards.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...