Jump to content

Push Button Start won't let me take control.

rlambert
 Share

Recommended Posts

cranium2001 Enthusiast

cranium2001

Posted
Posted
1 minute ago, BringTheRain403 said:

She was being a moody ****** again last night so I got clearer video.  Here are screen shots of the messages on the dash.  Video is uploading to YouTube.  I'll share the link once it's done...image.png.a03fc92c39289c4380876b858d19e8e4.png

 

image.png.80032ae11f677ff3894ae4ba8143114f.png

 

image.thumb.png.f974a37bfb553b3659d2623c4eff7b72.png

 

 

I believe mine said key fob programming. I just went and disconnected the battery as soon as I saw it happen. My running boards get all whacky afterwards too. I guess some people have this happen and come back later and it's "normal". Each time it's happened to me I wasn't home so I didn't have the luxury. I put a 10 mm socket in the center console after it happened the second time. I never expected it to happen again, but I was definitely wrong. I hope they can figure it out tomorrow. Do all of your cameras work? My front is out all the time. Usually the others work. I got the weird blue screen once and it hasn't happened since.

20240309_112229.jpg

  • Replies 132
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

gemarsh
gemarsh

God I'm starting to miss the days of fixing trucks with a test light and dwell meter!

newdude
newdude

Driver's master window switch.  We just had a truck in 4 times within 2 weeks.  It was bad to the point that it killed the battery.  The one we had kept putting the truck in to "key learning active" t

gemarsh
gemarsh

That is what my ear is for! ;>)

Posted Images

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted (edited)
1 hour ago, cranium2001 said:

I believe mine said key fob programming. I just went and disconnected the battery as soon as I saw it happen. My running boards get all whacky afterwards too. I guess some people have this happen and come back later and it's "normal". Each time it's happened to me I wasn't home so I didn't have the luxury. I put a 10 mm socket in the center console after it happened the second time. I never expected it to happen again, but I was definitely wrong. I hope they can figure it out tomorrow. Do all of your cameras work? My front is out all the time. Usually the others work. I got the weird blue screen once and it hasn't happened since.

20240309_112229.jpg

Yes all my cameras work.  Never really had any issues with that. 

 

Mine has been confined to the no start issue due to it being in remote learning mode and the dead battery because it keeps doing it over and over again and stays on for HOURS at a time.

 

Here's last night's video.  Skip to 3 minutes flat.  Nothing happens before that...

 

 

Edited by BringTheRain403
cranium2001 Enthusiast

cranium2001

Posted
Posted
12 minutes ago, BringTheRain403 said:

Yes all my cameras work.  Never really had any issues with that. 

 

Mine has been confined to the no start issue due to it being in remote learning mode and the dead battery because it keeps doing it over and over again and stays on for HOURS at a time.

 

Here's last night's video.  Skip to 3 minutes flat.  Nothing happens before that...

 

 

Mine just says the key fob programming part. At least that's all I've seen. Hoping for a fix tomorrow. I won't know until it's been a while. On average I've been stopped by jt every 10-14 days.

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted (edited)

The second message comes up about 10 minutes later.  This is far more frequent for me.  I get in and can't start it at least 2-3 times a week and if I'm not busy and it sits for more than 36 hours there's a good chance my battery is gonna be dead.  My master window switch was replaced today.  Took about an hour and cost me $154.

 

Crossing my fingers the such fixes it for both of us!

Edited by BringTheRain403
cranium2001 Enthusiast

cranium2001

Posted
Posted
23 minutes ago, BringTheRain403 said:

The second message comes up about 10 minutes later.  This is far more frequent for me.  I get in and can't start it at least 2-3 times a week and if I'm not busy and it sits for more than 36 hours there's a good chance my battery is gonna be dead.  My master window switch was replaced today.  Took about an hour and cost me $154.

 

Crossing my fingers the such fixes it for both of us!

Me too! Twice it happened on my lunch break, which I drive to daily, so I didn't have time to mess around. The second time, I was 40 miles from home and I was lucky enough to find something to unhook the battery with. Fingers crossed 🤞 for sure!

  • Like 1
BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted (edited)

So I can report that I had no messages, screens coming on, or lights flashing on my dash while the truck was off in the last 24 hours.  Obviously going to keep watching it and I'm probably going to keep the camera on it for 3-4 weeks when I'm not in it just to be sure.  Also, plan on trying to let it sit without starting it for 4 days and see if the battery dies.

 

Fingers crossed the window switch fixed it!

Edited by BringTheRain403
  • Like 1
cranium2001 Enthusiast

cranium2001

Posted
Posted
14 minutes ago, BringTheRain403 said:

So I can report that I had no messages, screens coming on, or lights flashing on my dash while the truck was off in the last 24 hours.  Obviously going to keep watching it and I'm probably going to keep the camera on it for 3-4 weeks when I'm not in it just to be sure.  Also, plan on trying to let it sit without starting it for 4 days and see if the battery dies.

 

Fingers crossed the window switch fixed it!

Hope that was it!

cranium2001 Enthusiast

cranium2001

Posted
Posted
13 hours ago, BringTheRain403 said:

 

Did they get yours swapped out and your cameras reprogrammed today?

It's in the shop right now. They might have to keep it an extra day. I am hopeful. 

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted
4 hours ago, cranium2001 said:

It's in the shop right now. They might have to keep it an extra day. I am hopeful. 

Fingers crossed!  I'm over 48 hours since they replaced the switch and there have been no messages.  Haven't started the truck since I got home from the dealership and the battery voltage is holding steady as well.  So far so good...

cranium2001 Enthusiast

cranium2001

Posted
Posted
On 4/3/2024 at 5:16 PM, BringTheRain403 said:

Fingers crossed!  I'm over 48 hours since they replaced the switch and there have been no messages.  Haven't started the truck since I got home from the dealership and the battery voltage is holding steady as well.  So far so good...

So, they pulled a TSB and went through all the steps which included six things. They also added an extra ground from the starter to the frame. If it doesn't fix the issue they will do the master switch. I ordered one online and will switch it myself. $50 shipped was fair.

 

As far as the camera situation goes, the programmer said we'd have to lower the camera in the grill 4.5" because of my lift kit. It wouldn't let him do anything. Something about GM cameras don't allow you to prvogram the angle like Dodge and Ford do. 

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted
3 hours ago, cranium2001 said:

So, they pulled a TSB and went through all the steps which included six things. They also added an extra ground from the starter to the frame. If it doesn't fix the issue they will do the master switch. I ordered one online and will switch it myself. $50 shipped was fair.

 

As far as the camera situation goes, the programmer said we'd have to lower the camera in the grill 4.5" because of my lift kit. It wouldn't let him do anything. Something about GM cameras don't allow you to prvogram the angle like Dodge and Ford do. 

 

I'm pretty sure I read that the master widow switch required programming by the dealer that's why I didn't mess with it myself

cranium2001 Enthusiast

cranium2001

Posted
Posted
8 minutes ago, BringTheRain403 said:

 

I'm pretty sure I read that the master widow switch required programming by the dealer that's why I didn't mess with it myself

Hopefully my mechanic buddy has all the equipment needed if that's the case. If not my other friend works for a gm dealer. I'll have him hook me up. I'm going to look into that right now. I appreciate the heads up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,962
    Total Members
    8,960
    Most Online
    contrabombarde
    Newest Member
    contrabombarde
    Joined

  • Who's Online   0 Members, 0 Anonymous, 857 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      From where I'm sitting this sounds like a compatibility problem. I'm assuming the 2007 was a 900-series truck, and not an 800-series (they were sold side-by-side in dealerships that model year), since it starts and runs.   This is why I HATE post-2006 vehicles. Everything becomes a huge problem when you try to keep the thing running for longer than the manufacturer has designed it to.    I can't remember when Global-A architecture started - either '10 or '11. For your sake, you had better hope it's '11, or you're going to be spending some BIG money to correct this cluster-eff. That's something you need to find out before doing anything else. You may have several computers bricked ... but the fact that it runs tells me you MIGHT be ok here.     EDIT: Just did a quick refresher. You're screwed. This is Global-A. The 2 systems are NOT compatible in the slightest. Once you get the correct engine in there that IS compatible, you're going to need to see how many computers are locked. Absolute NIGHTMARE to straighten out, too. Your buddy might be better off cutting his losses and finding something else.   Welcome to post-2006 vehicle electronics. This is why I quit the industry, and drive nothing built after 1994. This stuff takes all the fun out of wrenching!  
    • bwiese
      Show Us Your 2019 & Up T1 Pictures !

      By bwiese · Posted

      Recently acquired new 2026 Silv. 1500 WT  - L3B + 4WD,  std cab + std bed, in (duh!) Sierra White. Upgrades: replaced 'steelies' w/  Vision "Flow" black alloys,  17x8.5"; HDX nerf bar w/steps (black powdercoat); Weatherguard large/deep alloy saddle toolbox; Michelin fitted bedmat (sale, perfect fit) Weathertech door sill guards TBD: rear wheebox liners 4x black fender arch trim - searching for best  (Putco: chrome only; not looking for flares either!) -Bill    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      True, hard to say what differences there may or may not be between Chev and GM as well as a production year or mid year part change either.    I just found it odd that under the Sierra choice on the Autel that many of the last few years of production year did not include the choice of changing the tire pressure but if that is an Autel thing or a GM thing as to why the choices were not there. Knowing what tpms sensors are on the truck should give some guidance into which choices on the tool even make sense to try as I wouldn't give up just yet with the tool but I guess he will see what if anything he comes up with if he finds out a bit more info and tries a few more things on the Autel. 
    • davester
      Needing this part.

      By davester · Posted

      I'm sure if you went to a junkyard where you go in and pull the part off the truck yourself, not a used part place where they do it for you, you can get that part on it's own.  Depending on if and what else you would be buying, and time of day, they might even just skip over adding it as a item to the bill.
    • davester
      PF63 Oil Filters Going Away?

      By davester · Posted

      No, we trade them like pokeman cards.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...