Jump to content

Push Button Start won't let me take control.

rlambert
 Share

Recommended Posts

cranium2001 Enthusiast

cranium2001

Posted
Posted
1 minute ago, BringTheRain403 said:

She was being a moody ****** again last night so I got clearer video.  Here are screen shots of the messages on the dash.  Video is uploading to YouTube.  I'll share the link once it's done...image.png.a03fc92c39289c4380876b858d19e8e4.png

 

image.png.80032ae11f677ff3894ae4ba8143114f.png

 

image.thumb.png.f974a37bfb553b3659d2623c4eff7b72.png

 

 

I believe mine said key fob programming. I just went and disconnected the battery as soon as I saw it happen. My running boards get all whacky afterwards too. I guess some people have this happen and come back later and it's "normal". Each time it's happened to me I wasn't home so I didn't have the luxury. I put a 10 mm socket in the center console after it happened the second time. I never expected it to happen again, but I was definitely wrong. I hope they can figure it out tomorrow. Do all of your cameras work? My front is out all the time. Usually the others work. I got the weird blue screen once and it hasn't happened since.

20240309_112229.jpg

  • Replies 132
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

gemarsh
gemarsh

God I'm starting to miss the days of fixing trucks with a test light and dwell meter!

newdude
newdude

Driver's master window switch.  We just had a truck in 4 times within 2 weeks.  It was bad to the point that it killed the battery.  The one we had kept putting the truck in to "key learning active" t

gemarsh
gemarsh

That is what my ear is for! ;>)

Posted Images

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted (edited)
1 hour ago, cranium2001 said:

I believe mine said key fob programming. I just went and disconnected the battery as soon as I saw it happen. My running boards get all whacky afterwards too. I guess some people have this happen and come back later and it's "normal". Each time it's happened to me I wasn't home so I didn't have the luxury. I put a 10 mm socket in the center console after it happened the second time. I never expected it to happen again, but I was definitely wrong. I hope they can figure it out tomorrow. Do all of your cameras work? My front is out all the time. Usually the others work. I got the weird blue screen once and it hasn't happened since.

20240309_112229.jpg

Yes all my cameras work.  Never really had any issues with that. 

 

Mine has been confined to the no start issue due to it being in remote learning mode and the dead battery because it keeps doing it over and over again and stays on for HOURS at a time.

 

Here's last night's video.  Skip to 3 minutes flat.  Nothing happens before that...

 

 

Edited by BringTheRain403
cranium2001 Enthusiast

cranium2001

Posted
Posted
12 minutes ago, BringTheRain403 said:

Yes all my cameras work.  Never really had any issues with that. 

 

Mine has been confined to the no start issue due to it being in remote learning mode and the dead battery because it keeps doing it over and over again and stays on for HOURS at a time.

 

Here's last night's video.  Skip to 3 minutes flat.  Nothing happens before that...

 

 

Mine just says the key fob programming part. At least that's all I've seen. Hoping for a fix tomorrow. I won't know until it's been a while. On average I've been stopped by jt every 10-14 days.

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted (edited)

The second message comes up about 10 minutes later.  This is far more frequent for me.  I get in and can't start it at least 2-3 times a week and if I'm not busy and it sits for more than 36 hours there's a good chance my battery is gonna be dead.  My master window switch was replaced today.  Took about an hour and cost me $154.

 

Crossing my fingers the such fixes it for both of us!

Edited by BringTheRain403
cranium2001 Enthusiast

cranium2001

Posted
Posted
23 minutes ago, BringTheRain403 said:

The second message comes up about 10 minutes later.  This is far more frequent for me.  I get in and can't start it at least 2-3 times a week and if I'm not busy and it sits for more than 36 hours there's a good chance my battery is gonna be dead.  My master window switch was replaced today.  Took about an hour and cost me $154.

 

Crossing my fingers the such fixes it for both of us!

Me too! Twice it happened on my lunch break, which I drive to daily, so I didn't have time to mess around. The second time, I was 40 miles from home and I was lucky enough to find something to unhook the battery with. Fingers crossed 🤞 for sure!

  • Like 1
BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted (edited)

So I can report that I had no messages, screens coming on, or lights flashing on my dash while the truck was off in the last 24 hours.  Obviously going to keep watching it and I'm probably going to keep the camera on it for 3-4 weeks when I'm not in it just to be sure.  Also, plan on trying to let it sit without starting it for 4 days and see if the battery dies.

 

Fingers crossed the window switch fixed it!

Edited by BringTheRain403
  • Like 1
cranium2001 Enthusiast

cranium2001

Posted
Posted
14 minutes ago, BringTheRain403 said:

So I can report that I had no messages, screens coming on, or lights flashing on my dash while the truck was off in the last 24 hours.  Obviously going to keep watching it and I'm probably going to keep the camera on it for 3-4 weeks when I'm not in it just to be sure.  Also, plan on trying to let it sit without starting it for 4 days and see if the battery dies.

 

Fingers crossed the window switch fixed it!

Hope that was it!

cranium2001 Enthusiast

cranium2001

Posted
Posted
13 hours ago, BringTheRain403 said:

 

Did they get yours swapped out and your cameras reprogrammed today?

It's in the shop right now. They might have to keep it an extra day. I am hopeful. 

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted
4 hours ago, cranium2001 said:

It's in the shop right now. They might have to keep it an extra day. I am hopeful. 

Fingers crossed!  I'm over 48 hours since they replaced the switch and there have been no messages.  Haven't started the truck since I got home from the dealership and the battery voltage is holding steady as well.  So far so good...

cranium2001 Enthusiast

cranium2001

Posted
Posted
On 4/3/2024 at 5:16 PM, BringTheRain403 said:

Fingers crossed!  I'm over 48 hours since they replaced the switch and there have been no messages.  Haven't started the truck since I got home from the dealership and the battery voltage is holding steady as well.  So far so good...

So, they pulled a TSB and went through all the steps which included six things. They also added an extra ground from the starter to the frame. If it doesn't fix the issue they will do the master switch. I ordered one online and will switch it myself. $50 shipped was fair.

 

As far as the camera situation goes, the programmer said we'd have to lower the camera in the grill 4.5" because of my lift kit. It wouldn't let him do anything. Something about GM cameras don't allow you to prvogram the angle like Dodge and Ford do. 

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted
3 hours ago, cranium2001 said:

So, they pulled a TSB and went through all the steps which included six things. They also added an extra ground from the starter to the frame. If it doesn't fix the issue they will do the master switch. I ordered one online and will switch it myself. $50 shipped was fair.

 

As far as the camera situation goes, the programmer said we'd have to lower the camera in the grill 4.5" because of my lift kit. It wouldn't let him do anything. Something about GM cameras don't allow you to prvogram the angle like Dodge and Ford do. 

 

I'm pretty sure I read that the master widow switch required programming by the dealer that's why I didn't mess with it myself

cranium2001 Enthusiast

cranium2001

Posted
Posted
8 minutes ago, BringTheRain403 said:

 

I'm pretty sure I read that the master widow switch required programming by the dealer that's why I didn't mess with it myself

Hopefully my mechanic buddy has all the equipment needed if that's the case. If not my other friend works for a gm dealer. I'll have him hook me up. I'm going to look into that right now. I appreciate the heads up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,720
    Total Members
    8,960
    Most Online
    Wasierra1500
    Newest Member
    Wasierra1500
    Joined

  • Who's Online   0 Members, 0 Anonymous, 683 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...