Jump to content

Recommended Posts

Posted

My 2018 Silverado 3500 LTZ is at the dealer for maintenance and a recall issue. Everything is finished except now the left front turn signal is blinking and they don't know why. I can't get it back until they figure it out and fix it. This has not happened before and my list didn't include any issues with the turn signals. 

  • Confused 1
Posted

Sounds like someone either started the process of registering the tire pressure sensors on your vehicle or on one close to yours. Have them complete that process on yours. 

  • Like 1
  • Haha 1
Posted

Unless it’s different on the HDs, when GM vehicles are in the tire pressure sensor relearn mode, the turn signal showing which sensor to recalibrate will stay on steady. I’ve done this for several GM vehicles and they’ve all had steady lights.

Posted

Thanks for the reply and the information. Apparently, when they were working on it some wire got shorted out. They disconnected the battery again and when it was hooked back up all was good. 👍

  • 2 months later...
Posted

i have a 2014 chevy chevy crew cab ltz and i changed out all the exterior light to leds now i have hyper flashing. im a member of all data and ive looked up the wiring color scheme but its not right and still doing it. i have lime green dark green grey and black for both rears  can anybody tell me what im doing wrong with the load equalizers? im pretty good with electronics' but its not registering for me right now. 

Posted

When I changed the lights to led on my Peterbilt I had the same issue. I found out that I needed to change the flasher to an led flasher too. Once I did that the turn signals were fine. I have no information regarding the load equalizers. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • One of the few things I enjoyed about my time in the midwest was taking off on weekend drives. Unlike home, where we are boxed in by mountains and water, those rules don't apply to the inland plains. Roads connect and sprawl everywhere. While Minnesota is flat, it's not completely featureless and there are fast moving rural roads with curves and slight elevation changes. I used to relish heading out in a particular direction with no set destination, no curfew, and weaving through little townships, wherever the roads would take me. Along farms, lakes, or through the deciduous trees... It was beautiful in its own way, and the seasons were so distinct there. Fall drives yielded amazing shows of color and contrast. Summer drives rewarded with the and amber evening glow of the prairie (and lots of juicy bugs).    I do a lot of that here in my home state too. But it's much less mysterious/intriguing. I've traveled most roads in the region, and every road that's fun to drive within a good radius of my house. But every drive, even on the same old roads, is still enjoyable. I know where I can lean hard into the throttle or really throw the car into a curve. There are exercise loops for when I just need to keep certain cars limber, and much longer routes to settle in and enjoy a drive and put some miles on. All the mountains and water make for some really awesome roads for spirited driving. But not all my driving is spirited, for example, that's not really enjoyable in my pickup or this Blazer (that's still here...).   Sometimes a good drive is followed by a ritualistic wash before tucking the car away...
    • 'GMAuthority' is reporting the 2027 HD's will have the L8S 6.6L gasoline V-8.  There was some talk here about the L8S awhile back.  Not sure what changes it will have now as it seems the 2027 emissions regulations have changed from what was originally proposed.  The big question will be is L8S just a stopgap for the last 2 years of the current T1 HD platform or will it carry forward to the next generation 2029 T1-2 HD's?    I assume the L8S will still be a Gen. V engine. 
    • New engines will still be using DEF. You just won't have the limp modes occurring when you run out of DEF now.
    • I am not a NOCO fan for a charger I would leave on a battery 24/7. The reason is, it doesn't really float. It waits until the battery drops to a certain voltage and then charges it back up to 14V. It's better than no charger I guess.
    • I would never do anything but lithium.   If the vehicle is stored, just turn the disconnect off. My batteries are completely disconnected form everything in the trailer when my disconnect is off. Trailers don't always come that way as some still keep the CO/LPG monitor on. When mine is off...it is off.   As far as storage temps, LiFePO4 are good down to -20°C. I would store them in a heated place if it goes below that. You can also get heating mats with a thermostat if power is available.   The way the heaters work, if it's below 0°C, if a charge comes in, it is directed entirely to the heater until the battery gets above 0°C and then it allows the charge to go to the battery.   For my Android tablet I use as a display, I can move it inside my house if I was ever in an area that got super cold.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...