Jump to content

Can't Rotate Torsion Bar Key

dna9656
 Share

Recommended Posts

dna9656 Enthusiast

dna9656

Posted
Posted
I have a 2004 ZR 5 4WD. I installed a 2" lift kit on the suspension using spring shackles on the rear springs
and re-clocked(re-indexed) torsion bar keys. The tool I used to relieve the torsion bar torque is a OTC 37278.
While using the tool it it deformed the dimple in the key; now the tool slides out of the key and against the
adjustment block.If the key is lifted up off the adjuster block the tool is pushing against the block holding it
fast and hard. The keys are forged (or so says the MFR) I have 2 ideas: drill the dimple to restore it or try a
different tool; maybe a 2 arm gear puller..Any ideas?
asilverblazer Senior Enthusiast

asilverblazer

Posted
Posted

If memory serves you just need the tool to get the keys up enough to get the adjustment bolts started?

 

Have you tried to get more droop out of the lower control arm so there is less pressure on the torsion bar? Pulling the knuckle from the lower or upper control arm to let it down further, stabilizer bar end links...

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,879
    Total Members
    8,960
    Most Online
    Bert 22
    Newest Member
    Bert 22
    Joined

  • Who's Online   2 Members, 0 Anonymous, 776 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • newdude
      Me too……..

      By newdude · Posted

      The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • CamGTP
      Injector update

      By CamGTP · Posted

      Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.
    • richard wysong
      Injector update

      By richard wysong · Posted

      WoW
    • taze
      Me too……..

      By taze · Posted

      I can't believe that could possibly be the case. It should be 36mo/100k miles from installation. Then again, it also seems like since a dealership installed it, it'd all be in the system and you wouldn't need to worry about registering, either. Shows you what I know. 😄 Hope this one outlives the warranty!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...