Jump to content

Recommended Posts

Posted

Has anyone used the Kicker Hideaway powered sub? Im talking about the 8" power sub that will fit behind the seat(crewcab) NOT the GM/Kicker sub that mounts under the seat....

I am not looking for anything that is going to shake the windows anymore, i just want something that will make the stock radio(non bose) sound better.

Posted

I don't have any experience with either subs you mention. I do have a lot of experience with audio in general. Adding any sub will improve sound because it fills in the lower frequencies that are missing. 

I would also upgrade the stock speakers.

Posted (edited)

I will be installing the Kicker 46HS10 powered subwoofer in my 23 Denali in a few days.

 

Anyone know the easiest way and location to connect the speaker level wires?  I heard I need to connect to front speaker wires and not the rear.  I plan to locate the sub under the rear seat.  also what and where is the easiest way/location to connect the auto power on?  Should I pull the rear seat and make connections to the factory amp outputs there?

 

https://www.crutchfield.com/p_20646HS10/Kicker-46HS10.html?tp=114

 

Edited by typhoon186
Posted

I had the Kicker hideaway in my 2016 truck, its a nice unit that provides enough low end to the stock system.  I don't know how it will sound with the newer generation stock stereos but it was a nice addition to the previous generation.  

Posted

I got my Kicker hideaway 46SH10 installed.  Turned out nice.  Found it to fit PERFECTLY within the storage area under the rear seat with just a little trimming of the storage area wall.  It's exactly what I was looking for.  Small size with decent sound and easy installation at a good price.  It's not going to pound your chest when the base hits but it does a good job of filling in the low end on the new refreshed Bose system.  I mounted the base boost control under the dash just in front of the driver's knee (just above the .45) both for easy access.

 

IMG_9739.jpg

IMG_9750.jpg

IMG_9744.jpg

  • Like 2
Posted

Looks good, I am thinking of going this route for the new truck so will definitely use these pics for reference in the future. 

  • 2 weeks later...
  • 4 months later...
Posted
On 11/22/2023 at 7:22 PM, typhoon186 said:

Note- 

be sure to connect the sub to the front door speaker wires.   Not the rear.  

Can you tell me how you wired it all up? I have the same wiring questions as you.

Posted

removed the rear upper seat to access the factory amplifier.  Then just tap into the left front and right front speaker wires.  Sorry I can't remember the colors.

Posted

I put a Kicker 46HS10 Hideaway under my rear seat and I love it.  Really fills in the bass that was missing from the factory Bose system without rattling the windows....lol

  • 3 months later...
Posted
On 11/10/2023 at 6:58 PM, typhoon186 said:

I got my Kicker hideaway 46SH10 installed.  Turned out nice.  Found it to fit PERFECTLY within the storage area under the rear seat with just a little trimming of the storage area wall.  It's exactly what I was looking for.  Small size with decent sound and easy installation at a good price.  It's not going to pound your chest when the base hits but it does a good job of filling in the low end on the new refreshed Bose system.  I mounted the base boost control under the dash just in front of the driver's knee (just above the .45) both for easy access.

 

IMG_9739.jpg

IMG_9750.jpg

IMG_9744.jpg

 

Posted

No.  It's the factory bracket for the jack handle.  Just modified it to go over the sub.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • On the subject of OLM, Gm's OLM tool may be more "informed" than others brands. I recall OLM's in mid-2000's Chrysler products literally counting down a set number of miles. That's all the OLM appeared to be.    I would actually expect GM to be able to explain the parameters that their OLM takes into account from a high level. No, I would not expect them to disclose their software coding or data analysis around their parameters.   So we're talking about two different topics, so to continue the subject on the other one, I'd be curious to know how much "standard particulate matter" in fresh oil is able to be filtered at first start by a fresh oil filter. How much particulate matter is enough to "matter"?   I.e. how much of a "lever" do we think this equates to (variability in particulate content, in fresh oils, between different makes/brands, some which filter less, and some that filter more).   We can say that more particles = more wear = shorter engine life as a logical statement and use that data with a little marketing to scare people into selecting a more refined/filtered oil. Using a similie, is this like deciding to forego two alcoholic drinks in a lifetime because we're worried about the potential impact on lifespan? Are there numbers which translate the ISO test results into a quantifiable increase in wear for a given engine/use case?
    • I'm pretty sure it doesn't actually recalibrate the speedometer it just changes the wheel speed sensor inputs to the computer. The truck still thinks it has stock tires.
    • I apologize, I missed this post, at risk of going off CURRENT TOPIC.   I'm not saying it is BS, I'm questioning how much information is being held back. GM is NOT going to spell out exactly every parameter in the algorithm. Liability, intellectual property, etc.    I'm not naive enough to believe that it is as simple as revolutions, coolant temperature, miles, time; are you?    I don't do irrational either, and boiling the OLM down to four simple values that I could code in an afternoon (I'm not a coder) is irrational - unless it suits your agenda to ignore it. 
    • Chris 21 I appreciate your constructive response. !!  😉😉😉   The 6.6 is gas.  Correct me if I’m wrong but by recalibrating the speedo you’re correcting the shift points of the transmission on these trucks.?.
    • That is a huge misconception.     Bigger does not always equal safer.  Modifying does not make it safer either, with exceptions.   Think of this.  Your truck in stock form is capable of emergency maneuvers, proper stopping distances, its handling is designed around the factory wheel/tire packages, etc.   37s and a lift?  Now you've affected your braking distances, handling and ride control.  You've raised your center of gravity higher.  Your front visibility is now obstructed more than stock, same for your rear.  Does it look cooler?  Yes.  Does it now work as good as it did from factory on road?  NO.       As for my mention of exceptions?  Say you had a sedan or crossover.  They typically come with all season tires.  If you swap out for a performance all season or a summer tire, you improve your car by lowering its stopping distance (better braking because of traction) and improve the handling (regular and emergency) of the vehicle.  That is an actually improving modification.  My old 2019 LD 1500, I ran UHP all season tires on 20in wheels in a factory offered size.  It improved all aspects of how it drove over the Duratracs it came with from the factory in the stock 18" tire.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...