Jump to content

35/12.5/r20

Robbie R
 Share

Recommended Posts

Robbie R Enthusiast

Robbie R

Posted
Posted

Found a great deal on a set of 35/12.5/r20 nitto ridge grapplers. Was wondering if they will fit on my stock 24 Sierra 2500 at4. Apologize if the question has already been asked but can not find a straight answer. Appreciate the help in advance 

BuckWallace Enthusiast

BuckWallace

Posted
Posted
40 minutes ago, Robbie R said:

Found a great deal on a set of 35/12.5/r20 nitto ridge grapplers. Was wondering if they will fit on my stock 24 Sierra 2500 at4. Apologize if the question has already been asked but can not find a straight answer. Appreciate the help in advance 

I don't have any personal experience, but it seems like the max size on stock suspension with no rubbing is 295/65r20, which is almost an inch narrower than 35/12.5. Some people even report rubbing at full lock with the 295/65s, so 35/12.5 will probably be a bit too wide on stock suspension if you don't want to deal with rubbing.

  • Like 1
kevin74 Enthusiast

kevin74

Posted
Posted (edited)

I have 35/12.5/20 Nitto Recon Grapplers on my 2024 LTZ Z71 - so they should fit on your AT4 as I think yours is a little bit higher than mine. There is a SLIGHT rub on the driver's side at full lock, but nothing serious. 

Edited by kevin74
  • Like 1
A Chap Enthusiast

A Chap

Posted
Posted
On 6/25/2024 at 10:44 AM, kevin74 said:

I have 35/12.5/20 Nitto Recon Grapplers on my 2024 LTZ Z71 - so they should fit on your AT4 as I think yours is a little bit higher than mine. There is a SLIGHT rub on the driver's side at full lock, but nothing serious. 

Do you have any photos?

kevin74 Enthusiast

kevin74

Posted
Posted
7 hours ago, A Chap said:

Do you have any photos?

Here are some that I have on my phone. Let me know if you need any closer or different angled pics. 

 

 

 

 

 

3.thumb.jpg.6902d330fd85eda8d921049991fd0b51.jpg4.thumb.jpg.57ddc190de9fdf4c170c7b505c999fb5.jpg1.thumb.jpg.d3d5bb4afc978ae885c9fb1c0a9b3055.jpg2.thumb.jpg.c0722aa8086ada00af19cdb0363cd9c3.jpg

kevin74 Enthusiast

kevin74

Posted
Posted

Here are some more - the GMC I'm parked next to also has Nitto's on there, but I didn't verify the size. I threw in a pic of the solid aluminum folding tonneau cover I found on close-out for $150. 

 

7.thumb.jpg.eac7bdbc8f6a01b82df27d0542113559.jpg6.thumb.jpg.64e43bd1a0774da362e526906608425c.jpg5.thumb.jpg.c2e223290db78c16999ff3c3a5f97932.jpg

  • Like 1
A Chap Enthusiast

A Chap

Posted
Posted
19 hours ago, kevin74 said:

Here are some more - the GMC I'm parked next to also has Nitto's on there, but I didn't verify the size. I threw in a pic of the solid aluminum folding tonneau cover I found on close-out for $150. 

 

7.thumb.jpg.eac7bdbc8f6a01b82df27d0542113559.jpg6.thumb.jpg.64e43bd1a0774da362e526906608425c.jpg5.thumb.jpg.c2e223290db78c16999ff3c3a5f97932.jpg

Thank you, looks great.

  • 7 months later...
Brent Butler New Member

Brent Butler

Posted
Posted

I was wondering if you have a leveling kit on your 2024 chevy silverado 2500hd or is it stock because I was looking to buy a set of 35/12.5/r20 and I whated to see if it would fit with out rubing to much please let me no guys

kevin74 Enthusiast

kevin74

Posted
Posted

I am "kind of" leveled. I have 2" drop shackles in the rear as we tow an older gooseneck trailer that needed the bed to be a bit lower. The tires fit perfectly with only a very very slight rubbing on the fender liner in the front at full lock when turning the wheels to the right - no issues turning left. 

Robbie R Enthusiast

Robbie R

Posted
  • Author
Posted
1 hour ago, Brent Butler said:

I was wondering if you have a leveling kit on your 2024 chevy silverado 2500hd or is it stock because I was looking to buy a set of 35/12.5/r20 and I whated to see if it would fit with out rubing to much please let me no guys

I ended up going with the falken wildpeak at4 in a 35/12.5/20 on my sierra 2500 at4. No rubbing at all. Have about 15k miles on them and still have brand new tread life on them. IMG_2011.thumb.jpeg.c11c98098eb0a7e2d0a2a85afda9c066.jpeg

  • Like 1
Robbie R Enthusiast

Robbie R

Posted
  • Author
Posted
1 hour ago, Brent Butler said:

I was wondering if you have a leveling kit on your 2024 chevy silverado 2500hd or is it stock because I was looking to buy a set of 35/12.5/r20 and I whated to see if it would fit with out rubing to much please let me no guys

I ended up going with the falken wildpeak at4 in a 35/12.5/20 on my sierra 2500 at4. No rubbing at all. Have about 15k miles on them and still have brand new tread life on them. IMG_2011.thumb.jpeg.c11c98098eb0a7e2d0a2a85afda9c066.jpeg

Robbie R Enthusiast

Robbie R

Posted
  • Author
Posted
1 hour ago, Brent Butler said:

Thanks for the info buddy . Nice truck I have a red truck to . I might get the same tiyers as you

IMG_2723.thumb.jpeg.a2607d9355493cf89205b1ec57a6fcd8.jpegIMG_2724.thumb.jpeg.fa8d7a6e22ff1826c9456d883ba36c9b.jpegThanks. Here’s  some better pictures 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      That should answer the maximum depth difference between the stock and the PPE so its not hugely lower. As to the PML pan, they don't make any claims that it fits the L8T with the same transmission and in fact leave their information confusing, however on the surface it says "for Duramax" and so its hard to say. I know a while back and not sure which brand it was that specifically stated that the extra capacity pan that particular company made did NOT fit the gas version. 
    • fondupot
      Installed Bilstein 5100's on my 2024 2500HD - Worth it - VIDEO + GIVEAWAY Inside

      By fondupot · Posted

      There are several versions of the 5100's. Some for stock height, some for leveled, some for lifted.    Side note. I finally had a chance to tow with my 30' gooseneck with about 10,000 lbs of material on it this past week. Hands down the 5100's made the trailer towing much more stable and comfortable. I even had 10 cmu blocks in the bed. What a difference over the stock shocks. 
    • Tyler Gibbs
      Correct way to service 2024 l8t allison trans?

      By Tyler Gibbs · Posted

      According to PML, the stock pan is 4.3" deep - (PML info): Dimensions: at deepest area, PML pan is 7 inches, stock pan is 4.3 inches    PPE is 5.4" so roughly 1.1" deeper than stock
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I had not realized that PPE has come out with a version of a cast aluminum oil pan specific to being able to fit onto the 10L1000 with the L8T engine sometime this spring. I was doubting that anyone would come out with something beyond what Dorman had in more of a direct factory pan swap. I see from one comment that is on the PPE site that they found the pan to be tighter to install then the factory unit and having to flex the exhaust down to fit it. I didn't lookup any specs if they have any as per how much lower it hangs but as it holds more oil and has fins outside the pan it would no doubt hang a certain amount lower.    I looked back at the site and they do have some depth measurements to get a rough comparison to the factory pan total height or hang down if you will at the front and rear of the pan so that will give a good idea how much further down this pan would end up being for ground clearance issues.    2024-2026 GM 6.6L Gas 10L1000 Heavy-Duty Cast Transmission Pan – Pacific Performance Engineering    
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      I'm in constant amazement over the number of people that do oil maintenance by how they feel, what they were told, what materials cost, what brand A claims vs brand B.     Come to think of it, this behavior isn't exclusive to oil. 🤔 They drive this way too. 😬   There is a 20 plus page thread on BITOG on Mobil 1 Advanced Clean vs Valvoline Restore and Protect it would be amusing if it were not so........humanly pitiful.   Last Sunday we were are sitting at services and listening to a speaker talk about Jesus parable of the wide and narrow gates and he said something that hadn't dawned on me but totally fit the way people in general are about just about everything. He said there are so few people on the narrow path leading to a good reward not because the the narrow gate was hidden or hard to find but because the wide gate leading to a bad end it so darn easy and uncomplicated to follow!!!             

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...