Jump to content

Single cab owners

Chad H

By Chad H
in Audio, Electronics & Software

Recommended Posts

Chad H Enthusiast

Chad H

Posted
Posted

Hey guys,

I was wondering what the single cab guys are installing in their trucks for bass? I have looked at several dual 10" boxes but I am not wanting huge bass and I don't want it to take up what little room I have. Do I have any choices or do I just need to stick with the factory set-up?

 

Thanks,

Chad

  • 2 weeks later...
bignick31985 Enthusiast

bignick31985

Posted
Posted

Check my Silverado page. I have an 88 Regular Cab and I built a box for 2 RE 8's. Those lil bastards sound incredible. :crackup:

 

Its about 1.25 cubes tuned to 32 hz and I have could have built it MUCH wider. I'm 6'2" and I lost 2-3 clicks and can still drive beyond comfortably.

 

I dont have a tape measure on me, but I think depth is around 7-8 inches bottom depth, 3-4.5 top depth. I believe the height is 15-16". The top of the box runs right below a plastic piece that runs the width of my cab.

 

I used 1/2" mdf, and since the screws would destroy the half inch mdf, I used a combination of brad nails, finishing nails, and few self-tapping screws. I put L-brackets on the interior of the box and make sure its held together tightly.

 

Hope that helps man. If I can get a tape, I'll put exact dims up. Maybe the pics will be more of a help man!

 

The link to my SD page is in my sig, btw.

muddog Enthusiast

muddog

Posted
Posted

Chad, I have 1 10" sub behind my seat in a single cab and it is more than enough for a bass upgrade. I can send you pics and even CAD drawings because it is a tight fit to get like .75 to 1 CF. It might take me a day or two to get them to you. just let me know. :rolleyes:

 

By the way, I am running one MTX 10" Sub on a 300W 4 channel Amp with 2 front channels and a bridged rear.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • JimCost2014
      Towing In Loose Gravel

      By JimCost2014 · Posted

      If what you are doing works, keep doing it:   4LO (Four-Wheel Drive Low) should only be used in extreme low-speed, high-torque situations such as deep mud, heavy snow, steep rock crawling, or extreme inclines/declines, and you must follow the correct engagement procedure to avoid drivetrain damage. Intended Use Cases Deep mud or snow where traction is extremely poor and you need maximum torque to get unstuck Trucks Only+1. Rock crawling on steep, uneven terrain forum.fullsizechevy.com+1. Extreme inclines or declines where you need to control speed and maintain traction solutionsphere.blog. Heavy towing in low-traction conditions (e.g., deep sand, ice) carclubsusa.com.
    • rdonarski
      Towing In Loose Gravel

      By rdonarski · Posted

      Hi,   I work a steep boat landing that has patchy blacktop going down the hill and soft sand/gravel at the bottom. Due to low water levels, it's not always possible reach the blacktop. I've had to help several people get out this year already and with fall coming, I'm anticipating more. I always use 4L. There was a gentleman there today with a 2500 HD (actually 2 - him and his son both have them) and they were trying to get his son's wake boat out. This gentleman swears that you should use 4H in the soft gravel. Says he was a farmer and you always use higher gear when stuck. I was wonder what your thoughts on this are? If I'm wrong, it would be good to find out before things get busy.
    • Bill Lemmond
      Roll up bed cover experiences

      By Bill Lemmond · Posted

      Looking for feedback from users of roll up aluminum slat bed covers who have had it for more than 3 years. I prefer the aluminum slat style over supported vinyl covers due to security and the capacity to support a light load. The slight loss of bed opening when rolled up is not an issue. Presently have BAK Revolver the "industrial grade vinyl overlay" on mine is shrinking & coming loose at the rear and on both sides in addition to cracking at some of the folding joints. Truck lives outdoors in NC latitude. Can't justify the steep price to replace it with another one if that's the expected lifespan. Do you have a better alternative?
    • Bill Lemmond
      BAK Revolver bed cover

      By Bill Lemmond · Posted

      Thanks, your last sentence is the root of my problem, outdoors truck and southern latitude = UV overload. Looking at replacing with Rough Country powder coated aluminum slat roll up model. 
    • JakeD
      Tire fitment

      By JakeD · Posted

      I’m looking at putting a lift in my 2024 gmc sierra 1500 elevation trim, has anyone had any luck with fitting a bigger tire under the rear for a spare?? Was gonna go with a 4 inch zone lift Also what wheel and tire size setup are you all running? Wondering if I can get away with keeping around the stock size a 33 inch, and just get some new wheels to have enough back spacing then I can just keep my original spare tire I have under the truck now.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...