Jump to content

Little Rat F##%$, Need Ya'll's Advice


Recommended Posts

Posted

reading here has been an education here for me so far, and the topics i've read about people getting keyed is alarming, and sickening.........well, we just gat back from a 3 day trip at the beach and while washing my new Black GMT-900, low and behold, on the tailgate is a nice 2" long scratch that is surely deliberate as it is up near the whale tail piece and about 4" in from the left edge.............i was sure i could compound it out and then use some Scratch-X on it to make it go away, but "wow", the paint ain't too thick is it?

anyways, now i've got an area of what looks like polished primer showing through that's about 1/2" long and a 1/16" wide..........

i can't live with it, so what's my options here?

 

have the whole tail gate repainted?

try to spray touch up Black and clear coat in that area?

 

also, anyone have any ideas as to how much a repaint might be?

Posted

Only way to make it look right is to have the whole tailgate painted. If it's that new, take it back to the dealer... paint shouldn't be that thin. If it is.... it's wrong.

Posted

your probably looking at about 600 bucks to repaint the tail gate. If you can do all the prep, which sounds like it just needs to be sanded, you may get the price down a bit. Problem is if you have an off color like silver it may not match the rest of the truck due to the different dispersal patterns of the robotic spray guns compared to good old hand held ones.

 

you could however get a custom paint job done on it. Probably cost a G or more but would look awesome.

 

say something like these.

DSC01105.JPG

Posted

that's a killer paint job.

 

went to a local custom guy who once did work on my wife's Jag which is blue with violet overcoat.....couldn't tell he even touched the car except that the dealer induced rear dent was gone from new parts....he ain't cheap, but for $350.00, he's doin it, and i may have it back by weeks end....................other estimate from a friends body shop was $275.00...........i am gladly paying the extra as i know Bruce's work.

one thing i won't do again however is fix a scratch, at least the way i tried...............lesson learned :chevrolet:

Posted

yup...theres pros out there for a reason. I do my own scratch repair every now and than, but nothing thats down to primer.

  • 4 weeks later...
Posted
definitely paint the whole thing.. it will look much better

 

got it done, and it looks better than original..............minus the BIG GOLD BOWTIE

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • How did all that extra get added? AI bot! 
    • This is interesting. My quote tagged here is different from my original quote. After I’m driving them longer. That isn’t me. I don’t talk that way. I definitely wouldn’t express myself that way. Interesting.
    • I have the same running boards on my truck and I do agree they are bulky. I also find myself stepping over them when getting in and out of the truck. Besides providing protection to the rocker panels, they aren't very useful.  I will be replacing them soon with the Amp Powersteps. 
    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...