Jump to content

Ebony Seat


Recommended Posts

Posted

THIS SEAT BULLETIN IS SO CRAZY ; MY DEALER IS SAYING THERE IS 2 GRADES OF EBONY CLOTH; ONE IN THE WORK TRUCK HAS MORE "SHEEN" TO IT; THE "PREMIUM CLOTH IS WHAT MY LT1 REGULAR CAB HAS ACCORDING TO HIM; I HOPE HE DIDNT LIE TO ME; I AGREE ITS MORE ON OUTSIDE PANELS{LINT} BUT THE WHOLE SEAT IN MINE COLLECTS BAD. IF THEY ONLY REPLACE THE MIDDLE INSERT THEY WONT ACCLOMPISH A WHOLE LOT. ARE THE LT2 SEATS SUPPOSED TO BE DIFFERENT THAN LT1? IF THATS THE CASE THERE ARE 3 GRADES OF CLOTH. DARN CONFUSING; I SHOULD HAVE GOTEN LEATHER ANYWAY;

]

Posted

I was just on the lot today, the WT has a plain fabric kinda crappy looking, the SLE1/LT1 had the fabric with the fuzzy center section and the same sides as my SLE2/LT2 which has the shiney center section fabric kinda like a bunch of diagonal lines feels stronger than the lower trim level, both the SLE1/LT1 and 2 have the same side panels

Posted
I was just on the lot today, the WT has a plain fabric kinda crappy looking, the SLE1/LT1 had the fabric with the fuzzy center section and the same sides as my SLE2/LT2 which has the shiney center section fabric kinda like a bunch of diagonal lines feels stronger than the lower trim level, both the SLE1/LT1 and 2 have the same side panels

 

 

U R CORRECT DJ; I LOOKED AS WELL; IM JUST WONDERING IF THE GMC MIGHT BE UPGRADED OVER THE CHEVY FROM THE LT2 POINT. IM LOOKING IN THE NEW 07NBS BROCHURE AND CHEVY SHOWS THE CHEAP WORK TRUCK CLOTH AND PREMIUM EBONY CLOTH ONLY. I SAW A DIFFERENCE IMMEDIEATLY IN PTCS POSTED ON POST. SOMETHING JUST AINT MAKING SINCE THANKS

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Brought my 2015 Colorado into the dealership to check my touch screen issues, had that ghost touch thing happening. They said I needed a new touch screen and they could either order me one for $500. The lady at the service deck was nice enough to tell me I could order a touch screen online for less, she did stipulate that the touch screen had to be factory OEM, you can't pair an aftermarket screen to my radio seeing it was 2015, it had to be a GM factory OEM only. I found a few on Amazon and Ebay by the numbers on the back of the old screen, DJ080PA-01A GM# 22740886, Some said "OEM" in the description and others just said "Replacement". Would a replacement be the same as a OEM as long as it had the same numbers on the back of the screen? In some of the descriptions they also show different brand names but same numbers, is that an issue?  
    • I have both but typically use the 4 legged walker (wheels on front, ski's on back).   The four wheeler is starting to be used on "longer" outdoor walks.  The 4 legged walker is particularly helpful in practicing good walking posture.  Both of my knees are at different stages of recovery and I'm trying to not develop poor habits.  I can actually manage with a cane but it's very difficult not to favor one leg over the other.  My PT recommends I continue with my 4 legged walker for a while.  Yesterday was four weeks since my last knee replacement and I'm excited about my progress to date.  It has been a hell of a rough journey so far but it is exciting to witness  systematic and continuous improvement.  I went for years watching the decline of my "mobility".  It seems that everyday now I am alerting my wife to something I can do now that I couldn't a day or two ago!  I encourage anyone facing the prospect of knee replacement to share any concerns with others who have had the surgery.  It isn't an instant fix but rather is a considerable amount of short term pain for long term gain.  Recovery time and pain levels vary for individuals post surgery but the end results are typically very positive and I've never encountered anyone regretting having had the surgery. 
    • The lifter issue can be dealt with by shorter oil changes and quality oil IMO.
    • Got heavy rain, hail and light rain yesterday. 
    • I'm putting in an A-pillar pod/gauges, and I'm asking if anybody can identify a (preferably) fuse for a switched power and illumination circuit on the driver's side interior fuse panel. Offhand, everything I checked with a test light was constant-hot, and I'd much rather uses a piggyback fuse. I can certainly find a wire, but I'd rather not half-tap.   Thanks in advance for any help.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...