Jump to content

New Pics Of The Dmax With Some Colormatching


jr.parrish

Recommended Posts

Posted

I haven't posted here in a very long time, and I don't think I've posted any pics of this truck since I bought it a couple of years ago. But, lately I got the urge to have a few things painted and made some additions. We had an 80 degree day this week, so I spent a little time cleaning it up and snapped a few pics. Let me know what you think....

 

Added 06+ tow mirrors then had them painted along with the bumper cap...

 

IMG_3241.jpg

 

IMG_3226.jpg

 

IMG_3222.jpg

 

IMG_3220.jpg

 

IMG_3212.jpg

 

IMG_3207.jpg

 

IMG_3187.jpg

 

IMG_3184.jpg

 

IMG_3177.jpg

 

IMG_3175.jpg

Posted

Also did the full lux (escalade/denali) amp and touchscreen nav upgrade with CD changer and Ipod adapter... (The CDX isn't crooked anymore like it is in the pics)

 

PICT1579.jpg

 

PICT1580.jpg

 

PICT1584.jpg

 

PICT1582.jpg

 

PICT1586.jpg

Posted

very nice & clean truck! What year is it? Are those NBS badges? & I've never seen taillights like that before on one of these model trucks, '07 classic?

Posted

Good seein ya again jr! :chevy:

 

I'm with everyone else that's easily one of the best rigs I've seen here in a while.

 

 

Judging by the background I'd say you either shot those in Newport News, Portsmouth or Norfolk. :lol:

Posted
very nice & clean truck! What year is it? Are those NBS badges? & I've never seen taillights like that before on one of these model trucks, '07 classic?

 

Thanks for all the great compliments guys!

 

ws6.... It's a 2005. I just swapped out the badging with the GMT-900 counterparts and swapped the 01/05 duramax badges for the 06+ badges that say Duramax and Allison. The taillights are aftermarket ones that I got on Ebay. I was a little skeptical, but they are LED and work well. Even the third brake light is a very stock looking fixture with 10 bright LEDs that I found on ebay. I think they look very much stock, which is the only reason I even considered aftermarket lights. I can PM you a link if you want.

 

 

General... you nailed it... the pictures were taken in Norfolk

Posted
ws6.... It's a 2005. I just swapped out the badging with the GMT-900 counterparts and swapped the 01/05 duramax badges for the 06+ badges that say Duramax and Allison. The taillights are aftermarket ones that I got on Ebay. I was a little skeptical, but they are LED and work well. Even the third brake light is a very stock looking fixture with 10 bright LEDs that I found on ebay. I think they look very much stock, which is the only reason I even considered aftermarket lights. I can PM you a link if you want.

 

ah ok. Again beautiful truck! Those tails fooled me well they looked OEM :puke: Loving the NBS badging too

Posted
very nice & clean truck! What year is it? Are those NBS badges? & I've never seen taillights like that before on one of these model trucks, '07 classic?

 

Thanks for all the great compliments guys!

 

ws6.... It's a 2005. I just swapped out the badging with the GMT-900 counterparts and swapped the 01/05 duramax badges for the 06+ badges that say Duramax and Allison. The taillights are aftermarket ones that I got on Ebay. I was a little skeptical, but they are LED and work well. Even the third brake light is a very stock looking fixture with 10 bright LEDs that I found on ebay. I think they look very much stock, which is the only reason I even considered aftermarket lights. I can PM you a link if you want.

 

 

General... you nailed it... the pictures were taken in Norfolk

 

 

Are those taillights red smoke or red clear?

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...