Jump to content

2500 Vs 3500 Differences?


Recommended Posts

Posted

What is the major differences on a 2004 .... 2500 & 3500 non HD single rear wheel truck? It looks to me that the power train options are the same, the frames the same? Rearend options same? Payload is slight greater on the 3500. Am I missing anything major here?

Posted
No "HD" badging on either truck....

 

 

If it's a GMC they are HD"S but they are not badged as such. Probably the only diference is spring rates and maybe 265s vs 245 tires on the 2500. Mark.

Posted

I never seen a 3500 that was not a dual axle.

 

The 2500 series trucks have LT245/75R16E tires as standard equipment.

The 3500 series trucks have LT215/85R16D tires as standard equipment.

 

2500 and 3500 series with larger than stock tires

 

 

The 2500 series trucks have LT245/75R16E tires as standard equipment.

The 3500 series trucks have LT215/85R16D tires as standard equipment.

A truck that has different tires and wheels will have Engine power/performance concerns, Transmission shift concerns, Speedometer registered speed concerns, and Cruise Control concerns.

 

Before any diagnosis is performed for these types of concerns, inspect the tires/wheels for the proper tire and wheel combinations.

 

If a truck is found to have other than the above listed tire sizes, no further diagnosis should be undertaken until the original size tires and wheels are reinstalled on the truck.

 

The Engine Control Unit (ECM) and Transmission Control Module (TCM) use (RPM) and (VSS) inputs as operational parameters for engine torque, transmission shifting, cruise control operation and speedometer indicated vehicle speed.

 

Calibrations for different tire/wheel combinations are not available.

 

Therefore changing of tire and/or wheel size should not be undertaken by dealerships or truck owners.

 

Warranty Information

Reinstalling the proper wheels and tires on the vehicle, prior to performing any type of diagnosis of the truck, would be considered truck owner responsibility and not a warranty repair.

Posted
I never seen a 3500 that was not a dual axle.

 

The 2500 series trucks have LT245/75R16E tires as standard equipment.

The 3500 series trucks have LT215/85R16D tires as standard equipment.

Funny, I used to think that.....3500 always had DRW (dual read wheels). Then, after I got mine, I noticed a fair number of 3500 with single wheels.

 

Regarding the tire size for the 3500, perhaps since mine is a 3500HD, the load range is E and not D......LT215/85R16E.

Posted
IIRC 2004 was the 1st year to offer the 1 ton in SRW.

Thanks! That explains why I used to think that. ;)

Posted

I've seen a 2000 1-ton 3500 SRW Cheyenne before..At least the badging said 3500, I don't think the guy switched them out. Had the 350 Vortec in it.

Posted
I've seen a 2000 1-ton 3500 SRW Cheyenne before..At least the badging said 3500, I don't think the guy switched them out. Had the 350 Vortec in it.

 

We have 2 1998 crew cab long bed 1 ton single rear wheel trucks at work. They have 14 bolt FF, 4l80e, 4.10s, and 350 vortec. Bone stock since the day we bought them.

Posted
I've seen a 2000 1-ton 3500 SRW Cheyenne before..At least the badging said 3500, I don't think the guy switched them out. Had the 350 Vortec in it.

 

We have 2 1998 crew cab long bed 1 ton single rear wheel trucks at work. They have 14 bolt FF, 4l80e, 4.10s, and 350 vortec. Bone stock since the day we bought them.

 

 

You know your sig is missing an 'E', right? :cheers:

Posted
I've seen a 2000 1-ton 3500 SRW Cheyenne before..At least the badging said 3500, I don't think the guy switched them out. Had the 350 Vortec in it.

 

We have 2 1998 crew cab long bed 1 ton single rear wheel trucks at work. They have 14 bolt FF, 4l80e, 4.10s, and 350 vortec. Bone stock since the day we bought them.

 

 

You know your sig is missing an 'E', right? :cheers:

 

 

 

It was lost in the fire. :lol:

Posted
I've seen a 2000 1-ton 3500 SRW Cheyenne before..At least the badging said 3500, I don't think the guy switched them out. Had the 350 Vortec in it.

 

We have 2 1998 crew cab long bed 1 ton single rear wheel trucks at work. They have 14 bolt FF, 4l80e, 4.10s, and 350 vortec. Bone stock since the day we bought them.

 

 

You know your sig is missing an 'E', right? :cheers:

 

 

haha, yeah, that was the name of a jazz combo band I played keys in for a couple of years a few years back. I made the sig for another forum that only allowed 15 characters in the name. Didn't make sense to have 15 characters in the username and not in the sig, I will get around to changing it soon though

Posted
I've seen a 2000 1-ton 3500 SRW Cheyenne before..At least the badging said 3500, I don't think the guy switched them out. Had the 350 Vortec in it.

 

We have 2 1998 crew cab long bed 1 ton single rear wheel trucks at work. They have 14 bolt FF, 4l80e, 4.10s, and 350 vortec. Bone stock since the day we bought them.

 

 

You know your sig is missing an 'E', right? :lol:

 

 

haha, yeah, that was the name of a jazz combo band I played keys in for a couple of years a few years back. I made the sig for another forum that only allowed 15 characters in the name. Didn't make sense to have 15 characters in the username and not in the sig, I will get around to changing it soon though

 

 

Cool, another musician. If you have pictures of your setup, post 'em in here:

 

http://www.gm-trucks.com/forums/index.php?...c=83041&hl=

 

:cheers:

Posted

They have been building SRW 3500's for YEARS. My dad considered one when he bought his first 3500, but decided he wanted a dually. He tried Ford first, but they wouldn't build an F350 4x4 as a dually back then. GMC did...and this was 1986.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • New to diesel trucks. I happened to find my oil cooler leaking oil externally with only 4,000 miles on the truck. I didn’t realize this was an issue until I started researching it. Dealer is going to replace it under warranty but I’m wondering if there’s anything GM is working on to fix this issue. I’ve heard the oil filter used is the same as they use on their V6 motors and that’s what is causing the problems. Should I switch to a bigger filter or keep using the OEM recommended? 
    • So, GMCustomerService:  Judging by the Update History pictured above, is this truck missing any updates that it actually needs. If it's just for the infotainment system, the radio is working fine and no trouble with SeriusXM. and Android Auto is working fine wirelessly with my phone. Some months ago, an update notice was sent to my truck. I approved the update and it finished saying that the update was successful, but it seems that whatever that update was, it didn't actually get installed - at least not if I'm to go by the Update History shown above.   So, again, are there any updates that this truck really should have? I've checked with my dealer but they're reluctant or commit to anything and if I want them to check, they require a $200.00 fee just to check it out and then I'd have to pay for the actual update(s).    Ignorance is bliss, and if none of the updates goes to fixing any mechanical discrepancies, I'll just leave things as is.  
    • Hey everyone, I recently had an issue with my 07 2500HD GMT900. My DRL’s stay on at all times. Right front turn and right mirror turn signal indicator stay on solid at all times. By “at all times” I mean the only way to make them go off is disconnecting the battery. I tore the headlight assemblies out, tried disconnecting the harnesses to eliminate bad wiring at the harness, I unplugged the headlight switch, no change and the mirror turn signal still stayed on. My first thoughts were : Bad bulb and/or socket somewhere, under hood fuse panel bad, bcm bad, tail light or trailer wiring problem, or some random short to power in the harness.  Possibly a bad ground but unlikely. I had a big clue in the fuse panel, it had a burnt smell. I started pulling every fuse that had to do with DRL or right turn/park lamp. Nothing made the right directional turn off but pulling the DRL2 fuse made the DRL’s go out.  After studying wiring diagrams, I found that both problems had that fuse panel in common, the bcm also controls both problems but knowing the fuse panel had a burnt smell I removed and disassembled the fuse panel and found a little corrosion on the printed circuit board.  I ordered a new fuse panel from Amazon for like $260. When it arrived I installed it, and put everything back together, the problem was fixed. I figured the fuse panel needed to be replaced anyway so that was a logical place to start. Hopefully this story helps someone in the future. Regretfully I didn’t scan for codes before I did everything.
    • That stinks. I’m sitting on the side of the road right now with the same issue. Never had an issue before taking it in for the ground strap recall. Now I’m outside of warranty and they’ll probably want $200 just to diagnose what they already “fixed”. 
    • I wonder kind of nuts and bolts they will come up with next? Jim
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...