Jump to content

New Truck - Oil Spray/underbody Or Car Washes?


Recommended Posts

Posted

Hey everyone!

 

I just picked up a 2008 gmc sierra with GFX and I want to keep it looking sharp, but its already snowing up here in Alberta and there is salt out.

 

What do I do, should I have it oil sprayed for 100$ or just car wash the underside?

 

I'm paranoid about keeping my stuff in good condition whatever it is I own, and this truck is beautiful and I want to keep it that way! I hate salt!

 

I'm curious to know what % of people spray the undersides and what % don't do anything to their vehicles.

Posted
Hey everyone!

 

I just picked up a 2008 gmc sierra with GFX and I want to keep it looking sharp, but its already snowing up here in Alberta and there is salt out.

 

What do I do, should I have it oil sprayed for 100$ or just car wash the underside?

 

I'm paranoid about keeping my stuff in good condition whatever it is I own, and this truck is beautiful and I want to keep it that way! I hate salt!

 

We used to use a suction sandblaster to spray bar & chain oil underneath and inside the doors. You may have to heat it or cut it with 10% kerosene to get it to spray, but it really kept the rust off the medal. Old Vermonter's trick and I must say it worked. Vermont uses tons of salt. Others here may have a better method.

  • 2 weeks later...
Posted

i vote oil guard.. i'v only had my truck for a couple years... but my dad bought his 1996 sierra new, and has oil guarded it every year. the truck doesn't have a spot of rust, still look like new. but maybe he just got one with good metal!? anyways i always get mine oil guarded.. im anal like you and want it to stay looking new for a long time. if nothing else, i FEEL like my truck is guarded from rust when i leave the oil guard shop, and thats a great feeling!

Posted

Prior to delivery of the truck, I had requested it to be undercoated, and put it on thick in the tire wells. I plan on keeping this truck for a long time, and it is not a secret that the sheet metal is thinner then it used to be. So I am doing what I can to keep the sides from rusting out faster then they normally would.

Posted

On my last truck I never had it undercoated or treated with oil. Just had teh car wash spray the undercarriage and I never had rust issues. I plan on doing the same thing with this truck...

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...