Jump to content

We're being invaded

LarryE

By LarryE
in The Off-Topic Bar

Recommended Posts

MadFish Enthusiast

MadFish

Posted
Posted

In the last week the store hired 2 new guys to work nights. Both of them are rice boys. I dont see why they are hiring these type of people to work with us. We are some fine outstanding men. We never cuse, swear, talk inapropriately, use negitive language. We're the ideal employee's. Why mess with prefection. Ok, yeah thats a line of BS. But, atleast it sounds good :D

 

One's pretty cool. He doesnt care for the park bench as a wing and the stickers all over the car. But, he knows he cant out run good ol' american muscle.The other guy is gone. He's done a lot more drugs then I ever did. He cant drive and I guessing the law put a stop to his driving. But, all night they were talking about souping up their little rice on wheels. Me and the rest of the guys broke open a box of uncle bens rice and strated throughing it over the asiles at 'em. Made for an interesting talk with the boss.

chevy4x4trucks Senior Enthusiast

chevy4x4trucks

Posted
Posted

easy solution: next time they talk about all things rice grab a tow strap, go outside, back up to his bumper and hook it up.  Tell him that winner gets bragging rights so you can see just how good his rice really is :D

mikeb Enthusiast

mikeb

Posted
Posted

Count your blessings Madfish, they could have hired a couple of greenpeace tree huggers and then where would be.  At least the're into cars and moding their cars.

MadFish Enthusiast

MadFish

Posted
Posted
Count your blessings Madfish, they could have hired a couple of greenpeace tree huggers and then where would be.  At least the're into cars and moding their cars.

They already made that mistake. He lasted about one night. He was a bible thumper as well. He preached to me once, then he wouldnt talk to me for the rest of the night.

pacodiablo Senior Enthusiast

pacodiablo

Posted
Posted
They already made that mistake. He lasted about one night. He was a bible thumper as well. He preached to me once, then he wouldnt talk to me for the rest of the night.

lol, i hate it when people preach stuff to me!!  some old dude at east lake always walks around talking about jesus and stuff

alsz71 Enthusiast

alsz71

Posted
Posted

I keep calling it a Charger too But is a Charger ?

For some reason I think it's a GNX or A  Sattelite ?

doverarjim Senior Enthusiast

doverarjim

Posted
Posted

I have not seen the movie but on TV in the trailers it looks more like a 67 or 68 Charger to be to be Challanger and the Satallte (sp) had a different rear end on it.  In the previews I just laugh and make everyone made when I tell them that I don't care how good of traction a car has it will spin a tire before it pops a wheelie!  My son who has seen the movie says that it can happen and I tell him he is watching a scientiffic impossibility with that scene.

LarryE Senior Enthusiast

LarryE

Posted
  • Author
Posted

its a 70 charger  I have the dvd in right now and on the dvd rom features it lists all the car specs of the main cars

MadFish Enthusiast

MadFish

Posted
Posted

Its a Charger. Me and guys, I saw the movie with pissed a lot of people off in the theatre. And outside for that matter. A lot of ricers went limping home after the movie :D

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • linc45bn
      2013 2500HD 6.0L intermittent no crank no start

      By linc45bn · Posted

      I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • Grumpy Bear
      first oil change - 2026 2500HD gas

      By Grumpy Bear · Posted

      No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • Grumpy Bear
      Oil Consumption

      By Grumpy Bear · Posted

      How about them NICKS!!! 
    • Peoplemvr
      GMC 1500 Illuminated Front Grill Emblem REPLACEMENT.

      By Peoplemvr · Posted

      Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
    • revmanii
      Looking at ordering a '26 WT because I want a std cab, std bed

      By revmanii · Posted

      PS: Here's pic of the 2014 wheels I'd like to run when it's not winter. Stuck my finger around new wheel caliper setup. Very little clearance. I suspect these won't fit, but won't know for sure till I try.   Edit: And my first mod. Stubby antenna from the old truck.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...