Jump to content

Thoughts On Rc 7.5" Lift

sic lsx

Recommended Posts

sic lsx Senior Enthusiast

sic lsx

Posted
  • Author
Posted

yeah i know! That 3 kit just puts to much of a angle on the upper a-arm. I wanna see someones pics of it on their truck. Also why are people pay so much more for other name brands with same or less lift

blackout07 Senior Enthusiast

blackout07

Posted
Posted

RC just doesn't produce the same quality suspension systems as the other industry leaders, and that is why people pay twice as much for a well engineered and quality product. There is a reason that people say, "You get what you pay for." The 7.5" kit only drops the diff 5", so it's like stacking a 2.5" spacer on their 5" kit, which maxes out the suspension. In fact, you have to cut off the droop stops so the UCA's don't hit. And 6.5" "Anti-axle wrap" blocks? You would be better off with a smaller block and a AAL. This is nothing but someone at RC thinking it was a good idea to add a bigger spacer and bigger block to their 5" kit (which is an ok kit). I wouldn't touch it.

wayne53 Enthusiast

wayne53

Posted
Posted

There is a ton of guys running this setup that I know of and none of them have had any problems. The kit is definitely maxed out as it is and your angles are going to suck. I would recommend it only if you don't plan on driving it very hard. Talk to Jon at Southern Truck Performance (479-629-4407), he'll get you the best price around and he's a super nice guy to do business with.

sic lsx Senior Enthusiast

sic lsx

Posted
  • Author
Posted

anyone have any pics of the kit installed. i mean i can modify the diff drop to get a inch or to lower for that price! This thing is a street only truck. It will only be in 4x4 if needed, snow,ice, or dirt road gets nasty

FarmerDave Enthusiast

FarmerDave

Posted
Posted

I like my kit, but HATE the rear blocks. Just garbage, well built, but make the rear ride like a tractor. Il be throwing those blocks out someday and upgrading.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Getting greedy...   The AC pump has been replaced at least once per service records, and it's been recharged twice since 2018 or so, in approximately 2 year intervals between those charges.   It was done at the same shop...clearly they were enjoying the revenue of recharging the system periodically versus actually tracking down and fixing the leak. I learned that the owner was 88 years old when she passed in 2023, so maybe they assumed only a temporary fix was needed anyway.   The system is basically empty now, the compressor spins freely, so I'm guessing it "just needs a recharge".   I vacuumed it down, and it has basically held overnight. Doesn't appear to leak under vacuum, check! So it must leak under pressure. I don't have a way to pressurize the system and pressurizing it with shop air wouldn't be great for the air dryer (which is probably toast anyway?)   The dryer (accumulator? I'm not an AC expert) has a Schrader valve, but the high side has an old ball-type valve, which are notorious for leaking. It's clearly had schmutz blown out of it at one point because the line/area next to the valve is coated old black crud, which I assume is AC refrigerant residue/oil, or maybe even dirty dye. I think I'll roll the dice and replace the valves. I have a black light around here somewhere so I'll find it and shine it around the engine bay in the dark to see if there's any dye.   I can't think of another way to track down the leak other than injecting some dye (if it doesn't have any) and having it charged up. We can't buy R134a off the shelf here anymore, so I'll run it up to Jiffy Lube and have them do it. I think I have a coupon. At the very least, the charge should last long enough for a year or two, according to history. I think this truck will be long gone by then. But cold AC is a selling point.    
    • clowe1243
      6.2L L87 Powertrain Engine Noise (Lifter Failure) Question

      By clowe1243 · Posted

      Got the truck back today.  Called them yesterday to get an update, and miraculously my truck is finished?!?! The $13k out the door was complete bullshit!  Ended up being over $14k.  They added some bullshit service bulletin that I cant even find, where they replaced my radiator without telling me or asking me, and charging me for it.  Need to do more research into it, cause they leaked the first delivered radiator was ran over by FedEX.  Sounds like bullshit to me. 2.5 Months for an engine swap, which ended up being remanufactured, not new; ****ing ridiculous.  Brakes are squishy as hell, not sure if its from sitting.  Will give a couple days to see it that figures it self out.  GAVE IT BACK TO ME WITH 1 GALLON OF GAS!  Just filled the tank the day before drop off, more bullshit.  My dash cam SD card was formatted, not really much I can do about that. 3 year, 100k GM warranty at least.  Time to sell it and say **** off to GM.  Bad experience.  Cant wait for the survey email to come through.  Overpriced Raptor R, here I come!
    • haoleboyZ71
      Radio Update

      By haoleboyZ71 · Posted

      If I forget the phone in the truck, and forget the truck in the phone, and reconnect.  It works great for the day.  Truck sits overnight, and the next day is a no go.  It will connect Android Auto via usb cable, but not bluetooth.   Ive tried Everything in this thread so far, and nothing works for more than a day.   I think I might have to go to the dealer and have them flash the pcm.   thanks for all the suggestions guys. 👍
    • Bill Lemmond
      primary drive belt tensioner

      By Bill Lemmond · Posted

      2022 2500HD Crew Z71 Duramax single alternator.  Recently had the primary (water pump / fan) belt tensioner pulley bearing to fail while hundreds of miles from home of course the plastic pulley melted and belt shredded which took out some wiring. Found a replacement tensioner assembly and belt to continue now would like to find a replacement for just the pulley and bearing to have a spare assembly in case of a repeat, the rest of the tensioner is fine. Has anybody here found a correct replacement part for just the pulley and bearing? Any help is appreciated.
    • Atlas
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Atlas · Posted

      +1 for the 3.0   Perfect for 1500 pickup towing duties.   Perfect engine for a 1500 pickup period. Huge torque at stunningly low RPM makes it feel a lot lighter than it is. The fuel mileage is insane for a tall and heavy 1500... 30+ on the highway. Mid 20's around town.   It's probably not perfect if you bought a 6.2 for the braaaaaaapppppp V8 noises and wrapping it out to 6k. The LZ0 acts and sounds like a small turbo diesel and there's nothing you can do to make a small turbo diesel sound like a big one, and you can't make an inline diesel sound like a V8 diesel/big Duramax. It's a different driving experience altogether.   Drive one, I think you'll like it, though...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...