Jump to content

Buried The Truck Today...


Recommended Posts

Posted

Well long story short we have been getting hammered with lake effect and 30mph+ winds since yesterday afternoon. I attempted to go check on my house, still remodeling, from my parents and made it about a mile. I will say the truck went through some stuff I never expected, but old man winter got me.

 

I took this picture half way through digging her out. You can see it was 3 to 4 feet deep around the truck. What got me was the truck rode up on the skid plates and lifted the tires off the ground. Got it out myself, but it took me over two hours.

 

My pride is very hurt, serves me right I guess. I will say I am impressed at how it handles snow. Made it through a hell of a lot before I stuck it.

post-71733-1292277970_thumb.jpg

post-71733-1292277970_thumb.jpg

post-71733-1292277970_thumb.jpg

post-71733-1292277970_thumb.jpg

Posted

winter isen't being very kind this year, we got hammered with 2 feet of snow and 30 mph winds over the weekend and now its -8 outside with similiar bitter cold temps all week...i'm moving to narnia forget this

Posted

I read a bunch of people were stuck out on 30 by Wanatah. Crazy stuff.

Posted

nice!

 

Our first storm we got about 3 FEET , just about 2 weeks ago..

 

Now today its snowing again, 11 degrees now, and more snow to come! Hopefully that damn lake freezes over soon.. if now lake effect will be an everyday word!

Posted
All you had to do was hit the gas harder.

 

 

That doesn't always work. I remember one year when we got about a inch of sleet then about 13" of snow on top of it. I hammered the gas and still couldn't make it out of the driveway. My driveway has a incline I have to drive out of. The sleet was the thing that was preventing me from getting any traction.

Posted
dang it can i have some of yalls snow?? we dont get much here and i miss it lol

 

 

I was skiing for 12 years in a row all over colorado but havent gone since college. I want some of the snow as well..... i love it!

Posted
All you had to do was hit the gas harder.

 

 

That doesn't always work. I remember one year when we got about a inch of sleet then about 13" of snow on top of it. I hammered the gas and still couldn't make it out of the driveway. My driveway has a incline I have to drive out of. The sleet was the thing that was preventing me from getting any traction.

 

 

It was a joke. Lol

 

Although, "When in doubt, throttle out", hasn't let me down yet. :loser:

Posted

been there done that many times LOL even had to have my buddy pull out my avalanche with his f150.....my excuse was an avalanche isnt a real truck LOL

Posted

You guys down south stop hogging all the snow and send some up north to Nova Scotia, Canada, going through withdrawl up here.

post-62928-1292289016_thumb.jpg

post-62928-1292289016_thumb.jpg

post-62928-1292289016_thumb.jpg

post-62928-1292289016_thumb.jpg

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,716
    Total Members
    8,960
    Most Online
    BDS my HD
    Newest Member
    BDS my HD
    Joined
  • Who's Online   0 Members, 0 Anonymous, 616 Guests (See full list)

    • There are no registered users currently online
  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...