Jump to content

Disabling afm

sartwell

Recommended Posts

sartwell Enthusiast

sartwell

Posted
Posted

Hypertech tech support says they didn't support disabling the afm system till 09. Does anybody know of a programmer that will disable afm on a 08 5.3 ? Thanks

pinky93 Enthusiast

pinky93

Posted
Posted

Love it since it is gone!!! Transferred the DiabloSport from my 2009 to the new 2011......little stranger shifts than I am used to. Just have the 87 tune in it now, need to try the 93 and see how it shifts.

Mike@Diablosport Enthusiast

Mike@Diablosport

Posted
Posted

Love it since it is gone!!! Transferred the DiabloSport from my 2009 to the new 2011......little stranger shifts than I am used to. Just have the 87 tune in it now, need to try the 93 and see how it shifts.

 

If it is shifting too firm now, email me or Lew your backup and last tune written files from the Predator and we can smooth it out a bit for you ;)
  • 1 month later...
mrpenny43 Enthusiast

mrpenny43

Posted
Posted

There are several benefits to doing this. First of all the most popular reason is for adding aftermarket exhaust. If you install dual or sport exhaust with AFM active then it sounds like crap when changing to 4 cylinders from 8. Secondly, the vehicle loses power and torque with this feature due to the shift points for conserving fuel. These are the two most popular reasons people disable this feature..

ifshinxs Enthusiast

ifshinxs

Posted
Posted

And the number one reason is to keep the 5.3 from Burning oil.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      first oil change - 2026 2500HD gas

      By Chuck FB · Posted

      Indeed a proper drain tap or drain valve with adapter that has a hose on it that opens up the valve as the adapter goes on is a slick setup and have that for certain highway tractors etc and other equipment that came from the factory with a tap but this L8T is pretty darned good other than me doing it on the floor and easy to touch hot exhaust and am not as agile as I used to be !. If I really want to pull a hot filter on an engine I will use an insulated set of thick neoprene gauntlet gloves but I am not in the hurry I used to need to be so things are done more relaxed and in theory somewhat safer ... I think LOL.    And as I mentioned the unique shape of the Amsoil 1 quart containers, while they might not work as well as an offset pour spout container for some awkward engine location applications, they are working a lot better with my Lisle funnel kit because of how they prop up on all four corners when upside down resting on the rim of the funnel where the typical quart container would never stay put without holding onto it. 
    • mrbflat
      Clunk when coming to a stop... driveshaft/slip yoke? Mechanic couldn't recreate it

      By mrbflat · Posted

      Well, I just hit 100K a few weeks back, and I can honestly say I have not had any major issues with my '21 5.3 Crew cab.  I have done most routine maintenance, oil changes, air filter, tire rotations, and a transmission drain and filter change (not even a full flush).  A couple of months ago, I started experiencing the dreaded CLUNK when coming to a stop, sometimes hard enough to literally push the truck forward! After researching here and in other forums/youtube videos, etc, I was thinking it's the slip yoke. I finally had a chance to take it to my local mechanic today, and he was not able to recreate the issue.  Amazing, since it does it nearly every time I drive.  He also said he can't simply grease my slip yoke/driveshaft splines, because I have a 1 piece driveshaft.  I am not sure what else I can do.  Has anyone else had this issue or have any idea what else it could be?
    • Black02Silverado
      first oil change - 2026 2500HD gas

      By Black02Silverado · Posted

      This is where the Fumoto drain valve comes in handy.  No mess and able to change oil hot, like right off the interstate hot.  Flows nice and you can direct it into a container. As for the oil filter, I use an old dixie cup or plastic one from McDonalds. It contains the oil as you pull the filter down and not all over your hand.
    • Black02Silverado
      Which 2027 engine will you choose?

      By Black02Silverado · Posted

      Well, if it did change from lifters to rocker arms, at least it would be easier to fix as they fail.
    • Black02Silverado
      HighMileage oils or stay with Dexos 1 ?

      By Black02Silverado · Posted

      Doesn't hurt to try.  It's my understanding that you have to run it at least 4 or 5 oil changes for things to get clean.  Think about it, your engine didn't get dirty in just an oil change so over time it will slowly clean. It's the safest way to do it and not have seal issues.      I remember  a product that came out a long time ago, AutoRX, it was an additive you put in the oil and then drove for 3k miles. Some saw improvements and some didn't. It was suggested to use a non synthetic with it at the time. Same observation, use a couple oil changes and give it time to work. It also stated it worked best if you could drive on trips to keep the oil hot.  I'm sure if you ask AI it could tell you all about it.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...